what kind of laquer to seal pcb?

567234ta · 12-01-2005, 10:52 AM

what type can you use? will home depot stuff work?
where can i get some?

Brians256 · 12-01-2005, 12:05 PM

I don't know for sure which ones will work. I do know that there are PCB specific lacquers that you can buy at electronics stores, but whether they are the same as normal lacquer....? I doubt they are the same though.

bigben2k · 12-01-2005, 02:31 PM

Conformal coating:
http://www.procooling.com/index.php?...s&disp=44&pg=1

k|ngp|n · 12-01-2005, 04:44 PM

Guys...Use clear nail poilsh that you can get at your local walgreens. I like the quick dry stuff myself. Just paint it up all around the socket area of the mobo or the gpu area of the graphics card you are freezing. Works like a charm...Just did up DFI nf4 sli board tonight..see it around the socket?

You also want to do the area behind the socket as well, becasue condensation WILL form on the udnerside of the mobo behind the socket even with insulation:

I always use some dielectric grease in the socket pin holes and card slots too. I have had motherboards last me 20+ ln2 sessions and still going, doing this preperation work.

567234ta · 12-06-2005, 06:44 AM

i doubt its the condensation thats killing them lol

Joe · 12-18-2005, 12:22 AM

if you look at an old project I did, I found some otherstuff to work pretty good

http://www.procooling.com/index.php?...es&disp=1&pg=3

12-01-2005, 10:52 AM	#1
567234ta Cooling Neophyte Join Date: Sep 2004 Location: usa Posts: 93	what kind of laquer to seal pcb? what type can you use? will home depot stuff work? where can i get some? __________________ Dothan 780 @ 3.0 P4GD1 x1900xt flashed to xtx 2x512 ocz platinum elite Antec 550 true control 2.0

12-01-2005, 12:05 PM	#2
Brians256 Pro/Staff Join Date: Oct 2001 Location: Klamath Falls, OR Posts: 1,439	Re: what kind of laquer to seal pcb? I don't know for sure which ones will work. I do know that there are PCB specific lacquers that you can buy at electronics stores, but whether they are the same as normal lacquer....? I doubt they are the same though.

12-01-2005, 02:31 PM	#3
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Re: what kind of laquer to seal pcb? Conformal coating: http://www.procooling.com/index.php?...s&disp=44&pg=1 __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

12-01-2005, 04:44 PM	#4
k\|ngp\|n Cooling Neophyte Join Date: Jun 2003 Location: d3troit Posts: 9	Re: what kind of laquer to seal pcb? Guys...Use clear nail poilsh that you can get at your local walgreens. I like the quick dry stuff myself. Just paint it up all around the socket area of the mobo or the gpu area of the graphics card you are freezing. Works like a charm...Just did up DFI nf4 sli board tonight..see it around the socket? You also want to do the area behind the socket as well, becasue condensation WILL form on the udnerside of the mobo behind the socket even with insulation: I always use some dielectric grease in the socket pin holes and card slots too. I have had motherboards last me 20+ ln2 sessions and still going, doing this preperation work.

12-06-2005, 06:44 AM	#5
567234ta Cooling Neophyte Join Date: Sep 2004 Location: usa Posts: 93	Re: what kind of laquer to seal pcb? i doubt its the condensation thats killing them lol __________________ Dothan 780 @ 3.0 P4GD1 x1900xt flashed to xtx 2x512 ocz platinum elite Antec 550 true control 2.0

12-18-2005, 12:22 AM	#6
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Re: what kind of laquer to seal pcb? if you look at an old project I did, I found some otherstuff to work pretty good http://www.procooling.com/index.php?...es&disp=1&pg=3 __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)