in-line system with HDD cooling (pics)

Volenti · 01-25-2003, 05:57 PM

This is a setup I'm making for a friend, I did a quick job the first time and ended up with hoses and crap everywhere, so I thought I'd rectify the suitation.

The HDD cooling set up is to make sure his 240gig worth(over 4 drives) of storage doesn't cook in our hot queensland summer.

The pump is a resun 1200 (pow-3 I think) with my in-line mod, small enough to hang off the copper tubing (reducing vibration noise) water block is something I quickly knocked up, nothing special performance wise but adequate for the task (quiet being the aim, not overclocking) radiator is the heater core out of a datsun 120y, or 180b, I forget:o

note the fill tube, which comes directly out of the heatercore, fills/drains very easily.

gmat · 01-25-2003, 07:32 PM

I have a few questions, first from where do you drain the system, by the fill tube (i.e. topping down the case) ?
Next, don't you fear a leak springing from the tubing->pump attachment since the pump is suspended after the tubing ?
Finally, does this HDD cooling system allow noise insulation -> is it efficient enough ? Did you take any measurements (through S.M.A.R.T. function or with a temp probe) ?

Volenti · 01-25-2003, 08:03 PM

I have a few questions, first from where do you drain the system, by the fill tube (i.e. topping down the case) ?

yea tip the case over, drains nicely

Next, don't you fear a leak springing from the tubing->pump attachment since the pump is suspended after the tubing ?

not really, I've used a molecular bond plumbing adhesive to do the in-line pump mod, the barbs aren't coming off

, they'll be clamped in the final install (pics we're from the overnight leak test) the pvc tubing should easily be able to support the weight of the pump, it's pretty light.

Finally, does this HDD cooling system allow noise insulation -> is it efficient enough ? Did you take any measurements (through S.M.A.R.T. function or with a temp probe) ?

The system isn't together yet so I don't know, though the rest of the case will be sound damped, I'll see if the the HDD's are noticable when it's all together.

01-25-2003, 05:57 PM	#1
Volenti Cooling Savant Join Date: Jan 2002 Location: in a nice cool spot Posts: 427	in-line system with HDD cooling (pics) This is a setup I'm making for a friend, I did a quick job the first time and ended up with hoses and crap everywhere, so I thought I'd rectify the suitation. The HDD cooling set up is to make sure his 240gig worth(over 4 drives) of storage doesn't cook in our hot queensland summer. The pump is a resun 1200 (pow-3 I think) with my in-line mod, small enough to hang off the copper tubing (reducing vibration noise) water block is something I quickly knocked up, nothing special performance wise but adequate for the task (quiet being the aim, not overclocking) radiator is the heater core out of a datsun 120y, or 180b, I forget:o note the fill tube, which comes directly out of the heatercore, fills/drains very easily. __________________ feel free to icq/msn me, I'm always willing to toss around ideas.

01-25-2003, 08:03 PM	#3
Volenti Cooling Savant Join Date: Jan 2002 Location: in a nice cool spot Posts: 427	I have a few questions, first from where do you drain the system, by the fill tube (i.e. topping down the case) ? yea tip the case over, drains nicely Next, don't you fear a leak springing from the tubing->pump attachment since the pump is suspended after the tubing ? not really, I've used a molecular bond plumbing adhesive to do the in-line pump mod, the barbs aren't coming off, they'll be clamped in the final install (pics we're from the overnight leak test) the pvc tubing should easily be able to support the weight of the pump, it's pretty light. Finally, does this HDD cooling system allow noise insulation -> is it efficient enough ? Did you take any measurements (through S.M.A.R.T. function or with a temp probe) ? The system isn't together yet so I don't know, though the rest of the case will be sound damped, I'll see if the the HDD's are noticable when it's all together. __________________ feel free to icq/msn me, I'm always willing to toss around ideas.

01-25-2003, 07:32 PM	#2
gmat Thermophile Join Date: Mar 2001 Location: France Posts: 1,221	I have a few questions, first from where do you drain the system, by the fill tube (i.e. topping down the case) ? Next, don't you fear a leak springing from the tubing->pump attachment since the pump is suspended after the tubing ? Finally, does this HDD cooling system allow noise insulation -> is it efficient enough ? Did you take any measurements (through S.M.A.R.T. function or with a temp probe) ?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)