Help Needed

(AUST)Mod · 01-24-2006, 08:39 AM

I have ordered a Black Ice Xtreme 3 radiator for my cooling loop but see that i may run in to difficulty when mounting it. My case is a Thermaltake Tsunami and i have never seen such a large rad on/in this case before. does anybody have any Ideas where I can mount my Radiator without loosing Motherboard connectors? I was conscidering Underneith the case between my wheels and Chassis. Any other Ideas? Thankyou In Advance. Your help is appreciated.

9mmCensor · 01-24-2006, 01:30 PM

Build a rad box.

Have a seperate box to house your rad and fans and a resivoir/T and your pump.

billbartuska · 01-24-2006, 05:48 PM

Quote:

Originally Posted by (AUST)Mod

I have ordered a Black Ice Xtreme 3 .... Any other Ideas?

As soon as I get this mess sorted out...

(AUST)Mod · 01-24-2006, 09:16 PM

I Dont need a Rad Box. As Stated in the first post, I want the Radiator to be on or In the case, Not in a seperate enclosure. I was thinking about mounting the fans to the bottom of the case then the rad below them, and using u shaped brackets to mount my wheels. What do you guys

think?

Etacovda · 01-24-2006, 09:58 PM

that'll work fine. Just be aware that filtering the core might be useful if its on carpet, you'll have huge amounts of dust.

01-24-2006, 08:39 AM	#1
(AUST)Mod Cooling Neophyte Join Date: Jan 2006 Location: Perth Western Australia Posts: 3	Help Needed I have ordered a Black Ice Xtreme 3 radiator for my cooling loop but see that i may run in to difficulty when mounting it. My case is a Thermaltake Tsunami and i have never seen such a large rad on/in this case before. does anybody have any Ideas where I can mount my Radiator without loosing Motherboard connectors? I was conscidering Underneith the case between my wheels and Chassis. Any other Ideas? Thankyou In Advance. Your help is appreciated. __________________ Intel P4 3.4ghz on abit AA8 XE Fatl1ty mobo with 1gb of Ocz ddr2 533mhz ram. Ati X600Pro o/c'd to 410mhz core. Cooled by silverprop cyclone se, asetek watercool vga block, BIX 3 and Watercool 120mm. 1/2"

01-24-2006, 01:30 PM	#2
9mmCensor Cooling Savant Join Date: Apr 2004 Location: Canada Posts: 219	Re: Help Needed Build a rad box. Have a seperate box to house your rad and fans and a resivoir/T and your pump.

01-24-2006, 09:16 PM	#4
(AUST)Mod Cooling Neophyte Join Date: Jan 2006 Location: Perth Western Australia Posts: 3	Re: Help Needed I Dont need a Rad Box. As Stated in the first post, I want the Radiator to be on or In the case, Not in a seperate enclosure. I was thinking about mounting the fans to the bottom of the case then the rad below them, and using u shaped brackets to mount my wheels. What do you guys think? __________________ Intel P4 3.4ghz on abit AA8 XE Fatl1ty mobo with 1gb of Ocz ddr2 533mhz ram. Ati X600Pro o/c'd to 410mhz core. Cooled by silverprop cyclone se, asetek watercool vga block, BIX 3 and Watercool 120mm. 1/2"

01-24-2006, 09:58 PM	#5
Etacovda Cooling Savant Join Date: Feb 2004 Location: Dunedin NZ Posts: 735	Re: Help Needed that'll work fine. Just be aware that filtering the core might be useful if its on carpet, you'll have huge amounts of dust. __________________ Hypocritical Signature I tried to delete: Procooling: where scientific principles are ignored because big corporations are immune to mistakes and oversights.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)