Heatercore that fits 18x18 cm space

W1zzard · 02-05-2003, 03:42 PM

I'm looking for a heatercore that fits 18x18cm (7"x7") absolute maximum space WITH connects and everything ... the heatercore database didnt help much because the numbers there seem to be the cooling area ...

Thank you

Puzzdre · 02-05-2003, 04:09 PM

I'm interested in this too cos' I got three Opel cadett brass/copper hcores and they're 19 cm wide, and even taller than that. They look great but I will have to do some severe mod's to the tower case I have (the case is f@#$in 18 cm wide...

Any info will be double appreciated!

Thx

Banshee164 · 02-05-2003, 04:17 PM

The D-Tek/Chevette core is 6" x 7" with the connects

W1zzard · 02-05-2003, 04:28 PM

Chevette core is 20cm high .. i had someone measure it

DJ-Quack · 02-05-2003, 07:44 PM

Camaro heatercore, from like 88-92 I think.

W1zzard · 02-06-2003, 05:59 AM

Quote:

Originally posted by DJ-Quack
Camaro heatercore, from like 88-92 I think.

82-92 camaro heatercore is:
http://www.heatercore4u.com/2-453.htm

7 1/8x7x2 ... definitely too big ..

DJ-Quack · 02-06-2003, 08:07 AM

Erp, my bad ;x

How about a 75 chevy luv heatercore? Those are small enough to be fit at the bottom of lian li cases.

W1zzard · 02-06-2003, 11:38 AM

is this hc on hc4u ? or you have any other linkage?

zoson · 02-06-2003, 02:30 PM

get a black ice xtreme
-Zoson

BrianW · 02-06-2003, 08:35 PM

You can easily estimate the size of the tanks by comparing them to the barbs that come out of them. Typicaly a bottom tank is anywhere between .5-.75", and the top tank is anywhere from .5-1.125". Just add 2" to the dimension that includes the tanks, and you will have a conservative estimate of the size of your hc.....

Brian W

Note: Whoever wrote that HC database (airspirit i think), you should attempt to get ppl that have the heatercores on heatercore4u.com to measure and send you the outside dimensions of the hc's. Then you could cross reference that in your database. Alot of work I know, but would be much appreciated.

UnloadeD · 02-12-2003, 07:43 AM

I've used 2 of these in bottom of my PC-60, they are 5" wide x 7" tall counting tanks. Thats with the tubing cut off flush and holes plugged. First one I epoxied 3/8"x 1/4"NPT barbs into side of tanks. Second I cut about 2" of the barbed end of tubing (5/8") flattened the ends a bit so they were oval and epoxied them to side of tank.
http://www.heatercore4u.com/2-563.htm
Here's the one with the 5/8" copper tubing, I used Oatey's Epoxy Putty, it's very strong and much easier to work with than JB Weld.

peace.
unloaded

BTW, these cost about $50 from local autoparts store.

Banshee164 · 02-12-2003, 09:35 AM

The Chevette core will work, just measured it last night & its just under 18cm. If it was 20cm it wouldn't have fit in the spot i have it right now

02-05-2003, 03:42 PM	#1
W1zzard Cooling Neophyte Join Date: Sep 2002 Location: Stuttgart, Germany Posts: 25	Heatercore that fits 18x18 cm space I'm looking for a heatercore that fits 18x18cm (7"x7") absolute maximum space WITH connects and everything ... the heatercore database didnt help much because the numbers there seem to be the cooling area ... Thank you

02-05-2003, 04:09 PM	#2
Puzzdre Cooling Savant Join Date: Aug 2002 Location: Croatia Posts: 969	I'm interested in this too cos' I got three Opel cadett brass/copper hcores and they're 19 cm wide, and even taller than that. They look great but I will have to do some severe mod's to the tower case I have (the case is f@#$in 18 cm wide... Any info will be double appreciated! Thx __________________ 'Out of cheese error... ...please reboot the universe (press the GBL to continue)'

02-05-2003, 04:17 PM	#3
Banshee164 Cooling Neophyte Join Date: Oct 2002 Location: NJ Posts: 11	The D-Tek/Chevette core is 6" x 7" with the connects __________________ AMD XP1700+ TbredB 0302 @ 2250 mHz 1.9v Epox 8rda+ Radeon 9700pro @ 345/335 2 x 256mb Kingston HyperX PC3500 Maze3 - 3/8", Eheim 1048, D-Tek Core

02-05-2003, 07:44 PM	#5
DJ-Quack Cooling Neophyte Join Date: Dec 2002 Location: PCI slot 1 Posts: 43	Camaro heatercore, from like 88-92 I think. __________________ Epox 8RDA+ Radeon 9700 Pro 256mb pc2700 Samsung, max timings Western Digital SE 80gb 16x Creative DVD-ROM 48x/12x/48x Lite On CD-RW Windows 2000 professional w00t

02-06-2003, 08:07 AM	#7
DJ-Quack Cooling Neophyte Join Date: Dec 2002 Location: PCI slot 1 Posts: 43	Erp, my bad ;x How about a 75 chevy luv heatercore? Those are small enough to be fit at the bottom of lian li cases. __________________ Epox 8RDA+ Radeon 9700 Pro 256mb pc2700 Samsung, max timings Western Digital SE 80gb 16x Creative DVD-ROM 48x/12x/48x Lite On CD-RW Windows 2000 professional w00t

02-05-2003, 04:28 PM	#4
W1zzard Cooling Neophyte Join Date: Sep 2002 Location: Stuttgart, Germany Posts: 25	Chevette core is 20cm high .. i had someone measure it

02-06-2003, 11:38 AM	#8
W1zzard Cooling Neophyte Join Date: Sep 2002 Location: Stuttgart, Germany Posts: 25	is this hc on hc4u ? or you have any other linkage?

02-06-2003, 02:30 PM	#9
zoson Cooling Savant Join Date: Nov 2001 Location: X Posts: 204	get a black ice xtreme -Zoson __________________ Core i7 930 @ 4254Hz 22x193 \| ASUS R3E 901 BIOS \| 12GB Mushkin Blackline 3x4GB @ 1547MHz 7-8-7-24-1N \| Lian Li PC-A10B 2x EVGA GTX275 SLI @ 720/1266/1566 \| 2x 80GB Intel X25-M G2 SSD Raid 0 \| 3x 1TB Samsung Spinpoint 7.2K Raid 5 \| Corsair 950TX H2O \| Enzotech Sapphire Rev.A \| EK-FB RE3 \| Swiftech - 2x MCW60/GTX275 Unisink, MCP655b, MCRes Micro.v2 \| 3x HWLabs SR1-120 あなたの神への弓 Time isn't wasted, when you're gettin' wasted.

02-06-2003, 08:35 PM	#10
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	You can easily estimate the size of the tanks by comparing them to the barbs that come out of them. Typicaly a bottom tank is anywhere between .5-.75", and the top tank is anywhere from .5-1.125". Just add 2" to the dimension that includes the tanks, and you will have a conservative estimate of the size of your hc..... Brian W Note: Whoever wrote that HC database (airspirit i think), you should attempt to get ppl that have the heatercores on heatercore4u.com to measure and send you the outside dimensions of the hc's. Then you could cross reference that in your database. Alot of work I know, but would be much appreciated. __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

02-12-2003, 07:43 AM	#11
UnloadeD Cooling Savant Join Date: Oct 2002 Location: MidWest USA Posts: 176	I've used 2 of these in bottom of my PC-60, they are 5" wide x 7" tall counting tanks. Thats with the tubing cut off flush and holes plugged. First one I epoxied 3/8"x 1/4"NPT barbs into side of tanks. Second I cut about 2" of the barbed end of tubing (5/8") flattened the ends a bit so they were oval and epoxied them to side of tank. http://www.heatercore4u.com/2-563.htm Here's the one with the 5/8" copper tubing, I used Oatey's Epoxy Putty, it's very strong and much easier to work with than JB Weld. peace. unloaded BTW, these cost about $50 from local autoparts store.

02-12-2003, 09:35 AM	#12
Banshee164 Cooling Neophyte Join Date: Oct 2002 Location: NJ Posts: 11	The Chevette core will work, just measured it last night & its just under 18cm. If it was 20cm it wouldn't have fit in the spot i have it right now __________________ AMD XP1700+ TbredB 0302 @ 2250 mHz 1.9v Epox 8rda+ Radeon 9700pro @ 345/335 2 x 256mb Kingston HyperX PC3500 Maze3 - 3/8", Eheim 1048, D-Tek Core

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)