YY Cuce Case Question.

BrianW · 01-10-2003, 02:06 AM

Hello,

I would like to know the exact distance from the top of the power supply to the roof of the case.

Brian W

Flashman18 · 03-25-2003, 11:59 PM

I have the YY-0221B model. My power supply is 3.4 " tall(its a pc power and cooling silencer 400w atx.) From the top of that, it is 10 " to the top of the case. Hope it helps.

BrianW · 03-26-2003, 12:50 AM

Heheh.

I forgot I even posted that. Oh well, I am working on another project now.

http://forums.procooling.com/vbb/sho...&threadid=5543

Brian W

vegetto714 · 06-11-2003, 12:27 AM

Question for all YY case owners. If someone would be so kind as to measure the width of the motherboard chamber, I would be ever so thankful. I want to use a YY case for H2O cooling, but I dont know If my 6 inch wide D-Tek heatercore will fit in front where the intake fan is.

BrianW · 08-05-2003, 02:49 AM

Hello all,

I am revisiting using a cube case for a project. I am asking a big favor.

I want to know the following dimensions:

Inside Heighth of the Right (Drive) chamber : (I know from the above responses that is approx 13.5", but would like another measurement)

Inside heighth of the Left (Mobo) chamber: (I assume same as the drive chamber, but would still like confirmation)

Inside depth of Mobo chamber (from front metal, to rear metal):

Inside depth of Drive chamber (from approx. back of drive, to the rear metal):

Width of Drive chamber:

Width of Mobo chamber:

Thanks,

BrianW

BrianW · 08-06-2003, 11:09 PM

I know someone here has this case, please do me a big favor and grab the tape measure..... Hehehhe

Thanks,

BrianW

Prlwytkovsky · 08-17-2003, 09:19 AM

I finally remembered to take the measurements: Inside height (drive and mb compartment) 13 3/4", front to back (drive and mb compartment) 15 11/16", depth of the mb compartment 5 3/4" and drive compartment is 7 1/4".

The depth is from the middle divider to the metal side of the door. The door has 1/4" deep folded edges.

BrianW · 08-17-2003, 01:39 PM

Thanks!

BrianW

g.l.amour · 09-07-2003, 03:11 PM

thx alot dude

this means that your standard hc has no probs being installed in drive compartment, but it will take some hack/slash to install one in the mobo compartment, wonder how kev did it

01-10-2003, 02:06 AM	#1
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	YY Cube Case Question. Hello, I would like to know the exact distance from the top of the power supply to the roof of the case. Brian W __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 waiting for RMA'd Saphire 9800 ultra from Newegg) Last edited by BrianW; 08-24-2003 at 07:51 PM.*

03-25-2003, 11:59 PM	#2
Flashman18 Cooling Neophyte Join Date: Mar 2003 Location: Seattle, Wa Posts: 1	I have the YY-0221B model. My power supply is 3.4 " tall(its a pc power and cooling silencer 400w atx.) From the top of that, it is 10 " to the top of the case. Hope it helps. __________________ Epox 8KHA+, xp1800+, 512 crucial pc2100, Windows 2000 - all on a sesame seed bun.

03-26-2003, 12:50 AM	#3
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	Heheh. I forgot I even posted that. Oh well, I am working on another project now. http://forums.procooling.com/vbb/sho...&threadid=5543 Brian W __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

08-05-2003, 02:49 AM	#5
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	BUMP Hello all, I am revisiting using a cube case for a project. I am asking a big favor. I want to know the following dimensions: Inside Heighth of the Right (Drive) chamber : (I know from the above responses that is approx 13.5", but would like another measurement) Inside heighth of the Left (Mobo) chamber: (I assume same as the drive chamber, but would still like confirmation) Inside depth of Mobo chamber (from front metal, to rear metal): Inside depth of Drive chamber (from approx. back of drive, to the rear metal): Width of Drive chamber: Width of Mobo chamber: Thanks, BrianW __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

08-06-2003, 11:09 PM	#6
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	I know someone here has this case, please do me a big favor and grab the tape measure..... Hehehhe Thanks, BrianW __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

06-11-2003, 12:27 AM	#4
vegetto714 Cooling Neophyte Join Date: Jun 2003 Location: MI Posts: 10	Question for all YY case owners. If someone would be so kind as to measure the width of the motherboard chamber, I would be ever so thankful. I want to use a YY case for H2O cooling, but I dont know If my 6 inch wide D-Tek heatercore will fit in front where the intake fan is.

08-17-2003, 09:19 AM	#7
Prlwytkovsky Cooling Neophyte Join Date: Jun 2003 Location: Washington DC Posts: 28	I finally remembered to take the measurements: Inside height (drive and mb compartment) 13 3/4", front to back (drive and mb compartment) 15 11/16", depth of the mb compartment 5 3/4" and drive compartment is 7 1/4". The depth is from the middle divider to the metal side of the door. The door has 1/4" deep folded edges.

08-17-2003, 01:39 PM	#8
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	Thanks! BrianW __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

09-07-2003, 03:11 PM	#9
g.l.amour Cooling Savant Join Date: Mar 2002 Location: on da case Posts: 933	thx alot dude this means that your standard hc has no probs being installed in drive compartment, but it will take some hack/slash to install one in the mobo compartment, wonder how kev did it __________________ yo soy un tiburón

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)