New pelt setup underway! **Pics Inside** - Page 2

ricecrispi · 11-27-2005, 05:18 PM

It just happens you made a very good approximation for the pelts for 226 watt and 320 watt pelts.

It's a good general theory for all pelts as pelts vary depending on the manufacturer. Pelts from swiftech and dangerden are different from becooling and silverprop and different from other companies.

Unoid · 12-10-2005, 02:48 PM

I'm still figuring out what the best pelt would be for my watercooling setup.

I got a quad 120mm heatercore and I not comming close to taxing it. (on my 2.5ghz barton at 1.975V) 5v the fans = same temps as 12volt on the fans lol. idle an d load.

Perhaps a 320watt or 427watt would work best? with the maze4 peltier block?

DNA · 12-10-2005, 05:38 PM

Quote:

Originally Posted by Unoid

Perhaps a 320watt or 427watt would work best? with the maze4 peltier block?

The 377/437W peltier is 62mm square. I believe the Maze4 is 50mm square.

ElMoIsEviL · 02-01-2006, 01:14 PM

Having tried the Maze4 it's not as good as the Swiftech MCW5002 when used as a Pelt Block.

ElMoIsEviL · 02-06-2006, 10:05 AM

BTW, you should change that PowerSupply. There's nothing worse then an Aspire Power Supply. More bling then grunt and often undervolt your lines causing stability problems when overclocking.

the jew (raven) · 04-05-2006, 12:14 PM

Quote:

Originally Posted by ElMoIsEviL

Having tried the Maze4 it's not as good as the Swiftech MCW5002 when used as a Pelt Block.

Ai, but the 5002 doesn't easily accept 50mm pelts--the Maze4 does. Well, my 5002 has a raised "plateau" on its bottom that's 40mmX40mm........I pressumed this was standard. The pelt would then have overhang not being cooled.

12-10-2005, 02:48 PM	#27
Unoid Cooling Neophyte Join Date: Mar 2004 Location: INdiana Posts: 23	Re: New pelt setup underway! Pics Inside I'm still figuring out what the best pelt would be for my watercooling setup. I got a quad 120mm heatercore and I not comming close to taxing it. (on my 2.5ghz barton at 1.975V) 5v the fans = same temps as 12volt on the fans lol. idle an d load. Perhaps a 320watt or 427watt would work best? with the maze4 peltier block?

02-01-2006, 01:14 PM	#29
ElMoIsEviL Cooling Neophyte Join Date: Jan 2006 Location: Ottawa, Ontario Posts: 71	Re: New pelt setup underway! Pics Inside Having tried the Maze4 it's not as good as the Swiftech MCW5002 when used as a Pelt Block. __________________ Asus P5N32-E SLI \| Intel Core 2 Extreme QX6700 @ 4.23GHz (Swiftech MCW5002-775T 226W Pelt) \| 4x1GB OCZ Special Ops DC PC2-6400 DDR2 XTC \| 2xBFG TECH GeForce 8800 GTX OC 768MB Water Cooled \| Sound Blaster X-Fi FaT@l1Ty FPS Sound Card \| 2x74GB WD Raptor 10,000 RPM RAID0 \| 2x320GB Seagate 7200.10 7,200 RPM RAID0 \| SuperCooled: Enterprise Custom Cooling

02-06-2006, 10:05 AM	#30
ElMoIsEviL Cooling Neophyte Join Date: Jan 2006 Location: Ottawa, Ontario Posts: 71	Re: New pelt setup underway! Pics Inside BTW, you should change that PowerSupply. There's nothing worse then an Aspire Power Supply. More bling then grunt and often undervolt your lines causing stability problems when overclocking. __________________ Asus P5N32-E SLI \| Intel Core 2 Extreme QX6700 @ 4.23GHz (Swiftech MCW5002-775T 226W Pelt) \| 4x1GB OCZ Special Ops DC PC2-6400 DDR2 XTC \| 2xBFG TECH GeForce 8800 GTX OC 768MB Water Cooled \| Sound Blaster X-Fi FaT@l1Ty FPS Sound Card \| 2x74GB WD Raptor 10,000 RPM RAID0 \| 2x320GB Seagate 7200.10 7,200 RPM RAID0 \| SuperCooled: Enterprise Custom Cooling

11-27-2005, 05:18 PM	#26
ricecrispi Cooling Savant Join Date: Jul 2005 Location: california Posts: 429	It just happens you made a very good approximation for the pelts for 226 watt and 320 watt pelts. It's a good general theory for all pelts as pelts vary depending on the manufacturer. Pelts from swiftech and dangerden are different from becooling and silverprop and different from other companies.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)