Swiftech Air Cooled Pelt Setup

prb123 · 01-29-2003, 11:01 AM

Any ideas on how well this is going to work? There are no expected temps listed:
http://www.swiftnets.com/products/MCX4000-T.asp
I have no intention of getting one and am supprised that it is even being released.

Anyone?

nOv1c3 · 01-29-2003, 04:27 PM

Quote:

Originally posted by prb123
Any ideas on how well this is going to work? There are no expected temps listed:
http://www.swiftnets.com/products/MCX4000-T.asp
I have not intention of getting one and am supprised that it is even being released.

Anyone?

24-C with a 70 watts load about what amd chips put out looks pretty good to me

http://www.swiftnets.com/assets/imag...ange_chart.jpg

ps: Swiftech has made these for a good while ....they been in the heatsink and water cooling Business from the beginning ..They are one of the best out there

jaydee · 01-31-2003, 02:24 PM

Only problem I see is they want you to use a 80mm 80CFM fan to get the results it shows in the graph. Better plan on buying a box of ear plugs aswell.

nOv1c3 · 01-31-2003, 07:06 PM

Quote:

Originally posted by jaydee116
Only problem I see is they want you to use a 80mm 80CFM fan to get the results it shows in the graph. Better plan on buying a box of ear plugs aswell.

I can almost bet its one hell of a screamer hehe

ks1 · 04-24-2003, 02:33 PM

I have one and install a 120mm 130CFM on it (suck air out).
The temp of the pin is about ambient but the base is still warm. CPU temp is OK.

When I switch the fan to blow into the heatsink. Area around the heatsink gets very warm.

Talik · 04-25-2003, 04:50 PM

did you find that blowing gave a decremental cpu temp? or was your reason for sucking purely so you wouldn't heat up the motherboard?

ks1 · 04-26-2003, 12:57 AM

When the fan is sucking, CPU gets very low.
When the fan is blowing, CPU gets warm. But I suspect that the in-socket thermistor gets warm rather than the CPU die. Anyway, all other components get warm too eg. MOSFETs, capacitors, other ICs.

01-29-2003, 11:01 AM	#1
prb123 Cooling Neophyte Join Date: May 2002 Location: Michigan Posts: 51	Swiftech Air Cooled Pelt Setup Any ideas on how well this is going to work? There are no expected temps listed: http://www.swiftnets.com/products/MCX4000-T.asp I have no intention of getting one and am supprised that it is even being released. Anyone? Last edited by prb123; 01-29-2003 at 07:30 PM.

04-25-2003, 04:50 PM	#6
Talik Cooling Neophyte Join Date: Mar 2003 Location: Portland Or Posts: 95	did you find that blowing gave a decremental cpu temp? or was your reason for sucking purely so you wouldn't heat up the motherboard? __________________ Reality is nothing more than the delusions of the masses.

01-31-2003, 02:24 PM	#3
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Only problem I see is they want you to use a 80mm 80CFM fan to get the results it shows in the graph. Better plan on buying a box of ear plugs aswell.

04-24-2003, 02:33 PM	#5
ks1 Cooling Neophyte Join Date: Apr 2003 Location: Holland Posts: 7	I have one and install a 120mm 130CFM on it (suck air out). The temp of the pin is about ambient but the base is still warm. CPU temp is OK. When I switch the fan to blow into the heatsink. Area around the heatsink gets very warm.

04-26-2003, 12:57 AM	#7
ks1 Cooling Neophyte Join Date: Apr 2003 Location: Holland Posts: 7	When the fan is sucking, CPU gets very low. When the fan is blowing, CPU gets warm. But I suspect that the in-socket thermistor gets warm rather than the CPU die. Anyway, all other components get warm too eg. MOSFETs, capacitors, other ICs.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)