|
|
Xtreme Cooling LN2, Dry Ice, Peltiers, etc... All the usual suspects |
Thread Tools |
02-22-2001, 09:57 PM | #1 |
Cooling Neophyte
Join Date: Feb 2001
Location: Scotch Plains
Posts: 15
|
156 watt peltier PSU
Ok, I'm planning on adding a 156 watt peltier to my water cooling setup and I am a little confused about what kind of power supply I am going to need to power it. Can I just hook it up to an extra power supply I've got like a 250 watt ATX? If not will a new supply like one of the 330 watt or higher enermax's work? If not what kind of things should I look for when trying to find a good one to use? Thanks a lot in advance.
JT |
02-22-2001, 11:32 PM | #2 |
Cooling Neophyte
Join Date: Jan 2001
Location: Daytona Beach, FL USA
Posts: 93
|
|
02-23-2001, 11:43 AM | #3 |
Cooling Neophyte
Join Date: Jan 2001
Location: Dallas, TX USA
Posts: 15
|
What voltage is the TEC? is it from tedist.com? If its 15-16Vs thats max values and according to the people at tedist 12V is optimal Voltage as long as you have the amps to supply it. I have a second AT -PS that I ordered from swiftech. It is 400W 24A on the 12V rail. It works great, I use it to power multible TECS
|
02-23-2001, 06:08 PM | #4 |
Cooling Neophyte
Join Date: Jan 2001
Location: Daytona Beach, FL USA
Posts: 93
|
that should work fine...the peltier draws about 15-16amps immediately upon startup, but then quickly drops down to a draw of about 12.5 amps as soon as it heats up...
I personally agree that the peltier works most efficiently at 12V...but just to appease those that will flame me after I post this, the peltier WILL produce a greater deltaT at 15V...but there is only a 3 degree difference on the cold side versus a 23 degree difference on the hot side... so in effect, yes...it is most efficient at 12V, provided you can supply the draw these stupid little things are cool as shit, huh?... |
02-24-2001, 08:13 AM | #5 | |
Cooling Savant
Join Date: Nov 2000
Location: Eindhoven, Holland
Posts: 238
|
Quote:
|
|
02-27-2001, 06:38 PM | #6 |
Cooling Neophyte
Join Date: Feb 2001
Location: Scotch Plains
Posts: 15
|
I work for Radio Shack so I'd like to buy the power supply with my discount since it sounds like computer power supplies are a waste for peltiers, would one of the 13.8 volt 20/15 amp or 13.8 volt 25/20 amp ones work well?
|
02-27-2001, 07:39 PM | #7 |
Cooling Neophyte
Join Date: Jan 2001
Location: Daytona Beach, FL USA
Posts: 93
|
I'm sure it would be perfect
|
02-27-2001, 07:48 PM | #8 |
Cooling Neophyte
Join Date: Feb 2001
Location: Scotch Plains
Posts: 15
|
ok thanks for the help!
|
03-18-2001, 03:40 PM | #9 |
Cooling Neophyte
Join Date: Mar 2001
Location: Orlando,FL
Posts: 15
|
I've been thinking about a dedicated 120v to 16v transformer, like this model I found @ Radio Shack online, a Hammond model 166M16. It's a 18v, 10 amp transformer for $46.65. But it's only 3.75 x 2.25 x 2.5 inches in size. Has any one messed with something like this. I think it would be a good idea if you don't have enough room for another PSU.
__________________
Went to smoke crack.....Be back in 3 days |
03-18-2001, 08:24 PM | #10 |
Cooling Neophyte
Join Date: Dec 2000
Location: New Hampshire
Posts: 17
|
I'm quite curious on this subject too, as watercooling is calling my name (I'm already OC'd, my case is modded crazily, and I'm bored). Would an old AT PS work for it? I'm a newb, so what kind of amps at 12v would a 156 from tedist.com need? thank you in advance for dealing with my stankness in watercooling projects.
|
03-19-2001, 02:42 AM | #11 |
Cooling Neophyte
Join Date: Mar 2001
Location: Corona, Calfornia, United States
Posts: 17
|
ok... i have a Powmax 400W (16A on 12v) and need to run a TB-127 156Watt Pelt... this would power it fine... but could i add more then one pelt? does the 16a draw on the first pelt leave no more for the rest? how many could i power. blah blah blah, etc etc. thanks
|
03-19-2001, 05:34 AM | #12 |
Cooling Savant
Join Date: Feb 2001
Location: The Netherlands
Posts: 108
|
You can power just one 156 pelt with luck... 2 or more pelts are certainly out of the question...
|
03-20-2001, 01:29 AM | #13 |
Cooling Neophyte
Join Date: Jan 2001
Location: Daytona Beach, FL USA
Posts: 93
|
my 156W pelt would pull 15 amps at 15V...sometimes I would lower it to 12V, and it would pull 12.5A...
your psu won't power 2 of these... |
03-20-2001, 08:00 PM | #14 |
Cooling Neophyte
Join Date: Mar 2001
Location: California
Posts: 9
|
I got a 431watt enermax and the 12v line is rated at 15Amps i believe. Could it handle all my junk(kt7a,2hd,gf2,duron for now, dvd and like 3 fans. I am guessing the watts remaining are about 260ish and I ram my old 1ghztbird with the same hardware on a fong kai 250watt psu.
__________________
The only Sig I have is a P228 |
03-21-2001, 10:01 AM | #15 |
The Pro/Life Support System
Join Date: Dec 1999
Location: Denver, CO
Posts: 4,041
|
a 431 should work for that, as long as you arent going to use a pelt.
__________________
Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton. |
03-30-2001, 12:28 AM | #16 |
Cooling Neophyte
Join Date: Mar 2001
Posts: 37
|
Simple formula for calculating power needed for a pelt. P = IxE, P = Watts, I = Amps, E = Voltage. Simple formula translation will calculate any of the variables.
Watts = Volts x Amps Volts = Watts / Amps Amps = Watts / volts Amps = 156watts / 12volts 13 amps Ron
__________________
every thing is optional |
03-30-2001, 01:58 AM | #17 |
Cooling Savant
Join Date: Feb 2001
Location: The Netherlands
Posts: 108
|
Not exactly. The formulas you use are correct, but a 156Watt peltier doesn't use 156 Watt. That's the maxium amout of heat it can transfer at dT = 0. Besides that, the amout of energie needed at a lower voltage is lower so you can't use the number the way you do.
You can say Imax * V = Watt |
03-30-2001, 07:39 AM | #18 | |
Cooling Savant
Join Date: Nov 2000
Location: Eindhoven, Holland
Posts: 238
|
Quote:
and 16A @ 16V.. thats 250W..! the wattage-rating isnt the VA-rating
__________________
OC'ing is my middlename |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|