0.03 MPa pressure equivalent in head (feet)

Zyklon5 · 03-21-2005, 06:41 PM

If i posted this in the wrong section i apologize, as i'm no expert in this field please forgive my inherent mistakes, i would like to know the equivalent in head (feet) for a 0.03 MPa pressure.

In my country good watercooling is almost unavailable and i have to make do with other resources. I've found this pump: Resun ACO 003 220 V/35 W/0,03 MPa/60 l/min. Water flow looks good but since my lack of insight into this field i can't really figure out that pressure spec.

http://www.unistar.cz/profi/profi_pumpy.html
http://www.unistar.cz/profi/ACO-004A.html

Any help or adive will be greatly appreciated.
Thank you.

nikhsub1 · 03-21-2005, 07:21 PM

10.04 Feet.

BillA · 03-21-2005, 07:46 PM

http://www.convert-me.com/en/

Zyklon5 · 03-22-2005, 06:57 AM

Thanks. I should have searched better.

So judging on it's specs how do you think it would compare to let's say Swiftech MCP600, Hydor L30 or Eheim 1250 ? All i can do is compare the specs but i lack the in depth knowledge .. and i'm note very satisfied with my findings ...

I'll be using it mounted on the outside wall of my room along with a big heatercore and tank. The projected waterblocks are Alphacool NexXxos XP for the CPU and Alphacool GXP-NV40 for the GPU, no more than 6 meters of total tube length.

Ocasionally i'll be testing with plenty of ice in the reservoir as its pretty much the best solution to push a Winchester core A64.

JamesAvery22 · 03-22-2005, 09:50 AM

Am I insane or isnt that an air pump?

Only one barb and it has a piston to drive it?

bigben2k · 03-22-2005, 02:39 PM

Quote:

Originally Posted by JamesAvery22

Am I insane or isnt that an air pump?

Only one barb and it has a piston to drive it?

Nice catch; it looks like an air pump to me. A pretty noisy one at that too.

jaydee · 03-22-2005, 03:16 PM

Might be a good idea to get a water pump for a water cooling setup....

03-21-2005, 06:41 PM	#1
Zyklon5 Cooling Neophyte Join Date: Feb 2003 Location: - Posts: 2	0.03 MPa pressure equivalent in head (feet) If i posted this in the wrong section i apologize, as i'm no expert in this field please forgive my inherent mistakes, i would like to know the equivalent in head (feet) for a 0.03 MPa pressure. In my country good watercooling is almost unavailable and i have to make do with other resources. I've found this pump: Resun ACO 003 220 V/35 W/0,03 MPa/60 l/min. Water flow looks good but since my lack of insight into this field i can't really figure out that pressure spec. http://www.unistar.cz/profi/profi_pumpy.html http://www.unistar.cz/profi/ACO-004A.html Any help or adive will be greatly appreciated. Thank you. __________________ -

03-21-2005, 07:21 PM	#2
nikhsub1 c00ling p00n Join Date: Jun 2002 Location: L.A. Posts: 758	10.04 Feet. __________________ :-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-: E6700 @ 3.65Ghz / P5W DH Deluxe / 2GB 667 TeamGroup / 1900XTX PC Power & Cooling Turbo 510 Deluxe Mountain Mods U2-UFO Cube Storm G5 --> MP-01 --> PA 120.3 --> 2x DDC Ultras in Series --> Custom Clear Res "Artificial intelligence is no match for natural stupidity." 1,223,460+ Ghz Folding@Home aNonForums :-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:

03-22-2005, 06:57 AM	#4
Zyklon5 Cooling Neophyte Join Date: Feb 2003 Location: - Posts: 2	Thanks. I should have searched better. So judging on it's specs how do you think it would compare to let's say Swiftech MCP600, Hydor L30 or Eheim 1250 ? All i can do is compare the specs but i lack the in depth knowledge .. and i'm note very satisfied with my findings ... I'll be using it mounted on the outside wall of my room along with a big heatercore and tank. The projected waterblocks are Alphacool NexXxos XP for the CPU and Alphacool GXP-NV40 for the GPU, no more than 6 meters of total tube length. Ocasionally i'll be testing with plenty of ice in the reservoir as its pretty much the best solution to push a Winchester core A64. __________________ -

03-22-2005, 09:50 AM	#5
JamesAvery22 Cooling Savant Join Date: May 2004 Location: Northern VA Posts: 383	Am I insane or isnt that an air pump? Only one barb and it has a piston to drive it? __________________ Stabbing. My Heatware

03-21-2005, 07:46 PM	#3
BillA CoolingWorks Tech Guy Formerly "Unregistered" Join Date: Dec 2000 Location: Posts: 2,371.493,106 Posts: 4,440	http://www.convert-me.com/en/

03-22-2005, 03:16 PM	#7
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Might be a good idea to get a water pump for a water cooling setup....

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)