I need to know if anybody is gonna want one !! check it out

Jason-Pro · 03-15-2002, 01:00 PM

ok well i ordered some tubing from US Plastics and just got a call today saying they only sell it in 6ft sections so i ended up ordering 6 foot sections !!!!! so i got 6 feet when i only planned on getting 3 feet !! haha

so now i will be selling some.

but i need to know who would all want it.
what it is exacly is 3" ID 3 1/2" OD acrylic tubing. then i also have 4" and 3" Circle discs for bottoms. what i planned to do is take the 3" and glue it on the 4" and then glue it on the bottom and then sand it down so its all flat and looks purdy.
If you want one please let me know !!!!

Im thinking they will be anywhere from $30-$40. they will have aluminum tops (unless you wana make your own !! ) just drilled and tapped with 4-6 Allen Bolts holding it in.

i just wana get a list of a few people who would like them. and are 100% sure they want one !!
I will make it to the length you want. i paid like $8.50 a foot for the tubing so you can figure about how much itll cost for it and then $2 for the circles on the botom so its costing me about $10 for the acrylic for each foot to make. and then hose barbs. and then a top of some sort.

this is a picture of Somewhat what they will look like (pic is from pc-mac2000.com but his are skinnier and tall.

Heavy_Equipment · 03-15-2002, 09:07 PM

Put LED's in it!!! It'd look like a giant GLO-STICK.

Brad · 03-15-2002, 11:23 PM

run green or red led's with blue water, it'd look really cool

Jason-Pro · 03-16-2002, 01:37 AM

lol what i could do is drill holes and mount UV LEDs in there

but them are expensive i think.

VotTak · 03-16-2002, 01:51 AM

I'm looking at that myself... For the tube of size about 2".
But your are going to be huge... ID 3" and OD 3.5" ... it.s too big.

By the way did you find the clear clips?

WebMasta33 · 03-16-2002, 02:17 AM

This sounds silly... but you don't have a power supply or motherboard in your case... where are they?

Jason-Pro · 03-16-2002, 02:18 AM

clear clips? them are all machined my lil man

i could have a friend build em outa aluminum but i dunno.

the only reason i went w/ bigger tubing was because i guess i just wanted my system to hold more water. i will be making them probably not even 1' or so when i sell them i know people will want em short i could probably even make a bunch of 6" or something !! i got enough to make 8 of them mine will be probably 1 1/2 feet tho gonna hold alot of water

Jason-Pro · 03-16-2002, 02:19 AM

oh lol thats not my pc. thats just an example of one i found online. its just something like what im making its just to get the idea

VotTak · 03-16-2002, 02:35 AM

you could use cobra clips although they are not clear

Jason-Pro · 03-16-2002, 02:46 AM

cobra Clips?
are you the votak that bought my GF3 blocks?

VotTak · 03-16-2002, 12:13 PM

Yup... I'm the one...

I'm the only one and the same one VotTak on the net.

Here is the link to cobra clips:

Cobra clips

VotTak · 03-16-2002, 04:17 PM

Well... what can I say ... look for item # 44287
You gonna love it

Jason-Pro · 03-16-2002, 05:26 PM

wow i got a email back from pc-mac2000.com they want $150 USD for 2 !!!!!!!! shipped to usa what a ripoff

VotTak · 03-16-2002, 08:22 PM

Quote:

Originally posted by Jason-Pro
wow i got a email back from pc-mac2000.com they want $150 USD for 2 !!!!!!!! shipped to usa what a ripoff

They are crazy...
Anyway... I see it'll be cheaper to build it here... at home...

I still think that 2" width is enough

Sorry man just cant resist....

I'm thinking... what a hell I'm gonna do with the rest of material(plastic pipe/tube/hose whatever)????

Jason-Pro · 03-16-2002, 08:25 PM

well votak if you want one that is really short i can do that to like 5-6". i have enought o make 8 and mines gonna be probably about 1' or 1'6"

so ill have about 5' of tubing and enough botoms to make 7 so i could make some short ones to

Bose-Einstien Condensate · 03-16-2002, 09:58 PM

I may be interested in a custom job, especially if there is some way to get or make those clear holders.

Jason-Pro · 03-17-2002, 02:18 AM

a friend of mine has a few mills and CNCs in his garage. hes made them outa aluminum but ive never seen them made outa acrylic like that.

03-15-2002, 01:00 PM	#1
Jason-Pro Cooling Savant Join Date: Oct 2001 Location: Manitowoc, Wisconsin Posts: 217	I need to know if anybody is gonna want one !! check it out ok well i ordered some tubing from US Plastics and just got a call today saying they only sell it in 6ft sections so i ended up ordering 6 foot sections !!!!! so i got 6 feet when i only planned on getting 3 feet !! haha so now i will be selling some. but i need to know who would all want it. what it is exacly is 3" ID 3 1/2" OD acrylic tubing. then i also have 4" and 3" Circle discs for bottoms. what i planned to do is take the 3" and glue it on the 4" and then glue it on the bottom and then sand it down so its all flat and looks purdy. If you want one please let me know !!!! Im thinking they will be anywhere from $30-$40. they will have aluminum tops (unless you wana make your own !! ) just drilled and tapped with 4-6 Allen Bolts holding it in. i just wana get a list of a few people who would like them. and are 100% sure they want one !! I will make it to the length you want. i paid like $8.50 a foot for the tubing so you can figure about how much itll cost for it and then $2 for the circles on the botom so its costing me about $10 for the acrylic for each foot to make. and then hose barbs. and then a top of some sort. this is a picture of Somewhat what they will look like (pic is from pc-mac2000.com but his are skinnier and tall.

03-15-2002, 11:23 PM	#3
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	run green or red led's with blue water, it'd look really cool __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

03-16-2002, 02:17 AM	#6
WebMasta33 Cooling Savant Join Date: Dec 2001 Location: Nebraska Posts: 526	This sounds silly... but you don't have a power supply or motherboard in your case... where are they? __________________ ========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 ===========

03-15-2002, 09:07 PM	#2
Heavy_Equipment Cooling Savant Join Date: Mar 2002 Location: Newmarket, Ontario, Canada Posts: 282	Put LED's in it!!! It'd look like a giant GLO-STICK.

03-16-2002, 01:37 AM	#4
Jason-Pro Cooling Savant Join Date: Oct 2001 Location: Manitowoc, Wisconsin Posts: 217	lol what i could do is drill holes and mount UV LEDs in there but them are expensive i think.

03-16-2002, 01:51 AM	#5
VotTak Cooling Neophyte Join Date: Feb 2002 Location: Brooklyn/NY Posts: 44	I'm looking at that myself... For the tube of size about 2". But your are going to be huge... ID 3" and OD 3.5" ... it.s too big. By the way did you find the clear clips?

03-16-2002, 02:18 AM	#7
Jason-Pro Cooling Savant Join Date: Oct 2001 Location: Manitowoc, Wisconsin Posts: 217	clear clips? them are all machined my lil man i could have a friend build em outa aluminum but i dunno. the only reason i went w/ bigger tubing was because i guess i just wanted my system to hold more water. i will be making them probably not even 1' or so when i sell them i know people will want em short i could probably even make a bunch of 6" or something !! i got enough to make 8 of them mine will be probably 1 1/2 feet tho gonna hold alot of water

03-16-2002, 02:19 AM	#8
Jason-Pro Cooling Savant Join Date: Oct 2001 Location: Manitowoc, Wisconsin Posts: 217	oh lol thats not my pc. thats just an example of one i found online. its just something like what im making its just to get the idea

03-16-2002, 02:35 AM	#9
VotTak Cooling Neophyte Join Date: Feb 2002 Location: Brooklyn/NY Posts: 44	you could use cobra clips although they are not clear

03-16-2002, 02:46 AM	#10
Jason-Pro Cooling Savant Join Date: Oct 2001 Location: Manitowoc, Wisconsin Posts: 217	cobra Clips? are you the votak that bought my GF3 blocks?

03-16-2002, 12:13 PM	#11
VotTak Cooling Neophyte Join Date: Feb 2002 Location: Brooklyn/NY Posts: 44	Yup... I'm the one... I'm the only one and the same one VotTak on the net. Here is the link to cobra clips: Cobra clips

03-16-2002, 04:17 PM	#12
VotTak Cooling Neophyte Join Date: Feb 2002 Location: Brooklyn/NY Posts: 44	Well... what can I say ... look for item # 44287 You gonna love it

03-16-2002, 05:26 PM	#13
Jason-Pro Cooling Savant Join Date: Oct 2001 Location: Manitowoc, Wisconsin Posts: 217	wow i got a email back from pc-mac2000.com they want $150 USD for 2 !!!!!!!! shipped to usa what a ripoff

03-16-2002, 08:25 PM	#15
Jason-Pro Cooling Savant Join Date: Oct 2001 Location: Manitowoc, Wisconsin Posts: 217	well votak if you want one that is really short i can do that to like 5-6". i have enought o make 8 and mines gonna be probably about 1' or 1'6" so ill have about 5' of tubing and enough botoms to make 7 so i could make some short ones to

03-16-2002, 09:58 PM	#16
Bose-Einstien Condensate Cooling Neophyte Join Date: Dec 2000 Location: Atlanta, Georgia Posts: 84	I may be interested in a custom job, especially if there is some way to get or make those clear holders.

03-17-2002, 02:18 AM	#17
Jason-Pro Cooling Savant Join Date: Oct 2001 Location: Manitowoc, Wisconsin Posts: 217	a friend of mine has a few mills and CNCs in his garage. hes made them outa aluminum but ive never seen them made outa acrylic like that.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)