Go Back   Pro/Forums > ProCooling Technical Discussions > Xtreme Cooling
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

Xtreme Cooling LN2, Dry Ice, Peltiers, etc... All the usual suspects

Reply
Thread Tools
Unread 09-21-2002, 07:22 AM   #51
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

well i am biding on the unit now.checked out what i could and looks to be a good unit for what i need.just hope my bid holds.if not o well.i wont be on today to check it much so maybe i will get it.
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 09-21-2002, 07:29 AM   #52
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

i almost forgot look what i just got in for the project.sight glass and box of access vavles.sight glass will help me get the just right charge with out over charging.should make it easyer i hope.
Attached Images
File Type: jpg im001070resized.jpg (23.0 KB, 573 views)
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659

Last edited by bowman1964; 09-22-2002 at 09:46 PM.
bowman1964 is offline   Reply With Quote
Unread 09-21-2002, 11:43 PM   #53
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

well lost my bid.the other guy wanted it wourse than i did sold for $81.00
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 09-24-2002, 10:08 PM   #54
godsdice
Cooling Neophyte
 
godsdice's Avatar
 
Join Date: Jan 2002
Posts: 29
Default

Don't have much experience charging systems. Could you explain where the gauge and access valves go and from where do you charge the everything. Also, does the compressor already have oil in it?
godsdice is offline   Reply With Quote
Unread 09-24-2002, 10:24 PM   #55
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

Quote:
Originally posted by godsdice
Don't have much experience charging systems. Could you explain where the gauge and access valves go and from where do you charge the everything. Also, does the compressor already have oil in it?
yes the compressor will come complete with a full charge of oil.
there are 3 tubes comming out of most ac compressors.you have a small one called the hi pressure side. and a larger suction line called the low side.then you most of the time have one more large tube by itself that is used for fill purposes.,
now i am going to show you a pic of my new one.one the left you will see the fill tube.on the right you will see one larger tube(low side suction) andone smaller one marked hi side.now the gauges will connect to scrader ports i will solder inline in on the hi and low side to charge and monitor the system.
hope this helps
Attached Images
File Type: jpg im001056resized.jpg (28.5 KB, 520 views)
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 09-24-2002, 10:28 PM   #56
SonixOS
Cooling Savant
 
SonixOS's Avatar
 
Join Date: Mar 2002
Location: Silver Spring, MD
Posts: 282
Default

48 for TX Valve, 22 for hard start kit and 75 charge for installation.

does that sound reasonable to u bowman?
__________________
-sonix-
=======================
Antec SX830
Abit KR7A-133
MSI Geforce3 Ti200 VT128
TV-IN and TV-OUT
Sound Blaster Audigy
Linksys LNE100 V2.0
Toshiba DVD Drive 40x/16x
IBM Deskstar 60GXP 60gig
Watercooled
http://www.sonixnet.tk
=======================
SonixOS is offline   Reply With Quote
Unread 09-25-2002, 08:50 PM   #57
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

Quote:
Originally posted by SonixOS
48 for TX Valve, 22 for hard start kit and 75 charge for installation.

does that sound reasonable to u bowman?

well that is about right.now you know that the hard start is just a start capacitor to give it more juice. just to start up easer underload.which is a very good thing if you can do it.always use one if you can will make the compressor even last longer.75 may sound hi but it will take him a hour to install the tx vavle and about 15 min on the start kit.so the charge is a fair price if that is what you want.
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 09-26-2002, 08:44 PM   #58
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

well finally got my aluminum cooling tray finished so now i start my fitting and pipe bending.
just incase anyone was wondering this cooling tray will slide in the bottom of my custom aluminum pc case.so i can slide it in and out for ease of my old butt working on it.ha ha ha
Attached Images
File Type: jpg im001111resized.jpg (41.8 KB, 530 views)
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 09-26-2002, 10:16 PM   #59
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

i know alot of people wanted to see my block so here it is.i snaped a pic while i was stripping my pc down.sold my xp333 and xp2100 w/512 pc3000 to a friend.now my abit at7 maxx 2 is in and my corsair 512mg pc3200cl2 is in.now i have to wait on the xp2600.but that will be end of mid oct before i can buy that.
Attached Images
File Type: jpg image1resizedcpublock.jpg (33.5 KB, 542 views)
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 10-01-2002, 09:11 PM   #60
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

well i know its been a few days, trying to get caught up.I am working on too many parts at once.(1) I am trying to inprove on my block design with some added features into the new design.when new block is finished, i have designed a way to slow down the freon for the first 12 "s or so of the maze without making the channels any smaller.this should inprove heat transfer.(2) I am designing a way to adjust the freon flow to my chiller unit with out losing a freon charge,or using a exp vavle.this is trickie to do.still trying to get the best subcooling possible without overloading the compressor.trying to make the condensor do most of the work..well here is a little progress pic
Attached Images
File Type: jpg im001120resized.jpg (41.3 KB, 509 views)
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 10-01-2002, 11:17 PM   #61
godsdice
Cooling Neophyte
 
godsdice's Avatar
 
Join Date: Jan 2002
Posts: 29
Default

By reducing the strain on the compressor you mean trying to make a more efficient/large heat exchange from Freon-to-Water? Is that going to happen in a reservoir with tubing or in a copper plate system? Also, have you bought that electronic temperature controller on eBay yet?

Fun, fun, fun.
godsdice is offline   Reply With Quote
Unread 10-02-2002, 02:58 PM   #62
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

Quote:
Originally posted by godsdice
By reducing the strain on the compressor you mean trying to make a more efficient/large heat exchange from Freon-to-Water? Is that going to happen in a reservoir with tubing or in a copper plate system? Also, have you bought that electronic temperature controller on eBay yet?

Fun, fun, fun.
NO WHAT I AM TRYING TO DO IS KEPT THE HEAT TEMP UP ON THE CONDENSOR.BY KEEPING MOST OF THE HEAT GOING INTO MY CONDENSOR I WILL BE KEEPING IT AT MAX EFFICIENCY.HOTTER CONDENSOR AND COLDER AIR WILL GIVE ME THE BEST DELT T.SO AFTER I REMOVE ALL THE HEAT I CAN ,THEN I START SUBCOOLING THE LIQUID LINE(CAPILLARY LINE).SUBCOOLING IS A GREAT WAY TO GET THOSE EXTRA COLD TEMPS,BUT..........TOO MUCH CAN BE BAD.SEE IF YOU USE ALL THE COLD GAS FROM THE RETURN SIDE OF THE EVAP. YOU CAN END UP OVERLOADING THE COMPRESSOR WITH HEAT.

SEE ALOT OF PEOPLE JUST THINK SUBCOOLING IS GREAT AND THE COLDER THE BETTER BUT,ANY TIME YOU REMOVE HEAT FROM THE LIQUID LINE SIDE,YOU ARE DOING NOTHING BUT PUTTING IT BACK INTO THE COMPRESSOR.SO YOU MUST FIND THE RIGHT AMOUNT COLD TO STEAL.THE RETURN LINE NEEDS TO BE SOME WHAT COLD TO HELP IN THE COOLING OF THE COMPRESSOR.

AND NO I AM STILL WHEELING AND DEALING ON THE CONTROLLER.BUT I HAVE MADE A DEAL FOR THE SAME ONE AND A THERMISTOR SO I DONT SPEND A DAY AND NIGHT GETTING THE RIGHT CALIBRATION SET ON MINE
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 10-06-2002, 12:44 AM   #63
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

well i have gotten the chiller box bent and welded up.all alumiuim box and lexan lid.and going to try something never done in a chiller.i am going to use copper sheets brased to the copper tubes from the evaperator and stager the plates in the box.forcing the coolant up and around the plates.this should make the coolant have lots of contact with the refridgerant tubes.i know a lot of people just coil up the tubbing and flow water around and up though the tubes.but the water doesnt have to make contact to get around.on this chiller of mine it will have to make contact with the copper plates to just get out.i will try to post some pics during the week of my progress in the chiller tank itself.have also finished new and updated machine specs for my new evap block.the one i run now runs over -60f unloaded and -44 loaded.i am adding about 4 to 6 inches of more channel without adding more block.this was done by utilizing a cad cnc program and instead of a maze i am going where i have seen no one go before.a new maze design with so many turns the liquid will slam and make more contact i hope to give me a little more evap temps.i will try to post them first of the week.
Attached Images
File Type: jpg im001122resized.jpg (36.9 KB, 482 views)
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 10-06-2002, 10:49 AM   #64
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

well i have the evap almost done for the chiller.took me a while to bend but here it is.3 layers with copper plates i have to solder on to make the coolant move thought the maze.heres a peak.
Attached Images
File Type: jpg im001124resized.jpg (29.0 KB, 470 views)
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 10-06-2002, 10:57 AM   #65
bigben2k
Responsible for 2%
of all the posts here.
 
bigben2k's Avatar
 
Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
Default

I see where you're going.

By adding fins to the tubes, you'll increase the surface area, and the cooling potential.

It seems to me that the challenge with this would be to find the right fin spacing, or at least the right coolant flow arrangement, to prevent the coolant from freezing up on the tubes.

How do you plan to address that?

Also, have you considered lining the inside of your Alu box with some kind of rubber sealant, to prevent galvanic corrosion?
bigben2k is offline   Reply With Quote
Unread 10-06-2002, 05:13 PM   #66
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

well i happened to run across some .040 copper sheet material .i am going to solder the flat plates to the tubes horizontal.3 plates in all.coolant from video gpu and chipset will enter under the bottom plate though a tube with spray holes drilled into a piece of tubbing.this will try to evenly move to coolant under the bottom plate and move up though a gap int the lower plate.move across untill it goes up again.until it reaches the upper plater where it will flow upwards and flow over a dividing wall ,thus spilling over into a collection area where the pump will be mounted and pump it up and out.this should give it enough time to pull of the heat from the coolant.i would'nt be going to all this design if i had a large tank.but putting this all together inside a pc i had to maximize my cooling effecientcy.
and i am going to spray the inside with a sealant.proberly some kind of insulating coating.spray rubber i think.i still have a couple of spray rubber spray cans around here somewhere.
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 10-06-2002, 05:20 PM   #67
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

i knew i had some
Attached Images
File Type: jpg im001128resized.jpg (44.9 KB, 447 views)
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 10-10-2002, 09:33 PM   #68
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

well i am getting a little farther along.almost finished the chiller . here is my set of coils with the sold copper plates soldered on.
Attached Images
File Type: jpg im001146resized.jpg (18.6 KB, 520 views)
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 10-10-2002, 09:34 PM   #69
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

forgot to tell .i got the temp controller on the way.
Attached Images
File Type: jpg image1.jpg (10.3 KB, 408 views)
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 10-10-2002, 10:12 PM   #70
bigben2k
Responsible for 2%
of all the posts here.
 
bigben2k's Avatar
 
Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
Default

Ooooh, goodies!

Nice work.
bigben2k is offline   Reply With Quote
Unread 10-14-2002, 09:29 PM   #71
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

wanted to let everyone know while i was taking it easy this weekend i actually wrote a artical or two.so i hope the first one will help out the new guys a little.now the one i am writing now will give the specs to the current evaperator i am using and how i built that system.everyone has been on me for the evaperator infromation so it will be in here.i am wanting on some parts now before i can move along very much more.another roll of capillary tubing and my new temp controller should be to me by friday.

heres the link to the phase change artical 101 beginners
http://www.phase-change.com
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 10-16-2002, 10:15 PM   #72
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

looky here guys got my new controller in.just had to hook it up to see what kind of temps i was really gettingon my current system.unloaded of couse.
you can see the evap and my radio shack meter pegged.but i cannt peg that simpson.they say a picture is worth a thousand words.
Attached Images
File Type: jpg -72.jpg (28.5 KB, 395 views)
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 10-16-2002, 10:43 PM   #73
Vector86
Cooling Savant
 
Vector86's Avatar
 
Join Date: Jun 2002
Location: KANSAS "it's not just cows"!
Posts: 211
Default

it is so cool to see a project come from nothing and begin to take shape
keep up the good work
Vector86 is offline   Reply With Quote
Unread 10-17-2002, 06:39 AM   #74
bowman1964
Cooling Savant
 
bowman1964's Avatar
 
Join Date: Jul 2002
Location: virginia usa
Posts: 126
Default

Quote:
Originally posted by Vector86
it is so cool to see a project come from nothing and begin to take shape
keep up the good work
well sorry i didnt really make myself clear. the picture is from the current cooling i have running now.i still am building the new cooler as i am showing in this forum.i just wanted to see how the temperture controller was working.
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit

3D2001SE 21315

3DMARK03 6659
bowman1964 is offline   Reply With Quote
Unread 10-17-2002, 08:29 PM   #75
dream caster
Cooling Neophyte
 
Join Date: Aug 2002
Location: Atacama desert, Chile
Posts: 43
Default

Most interesting.
just keep going!
dream caster is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 12:32 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...