|
|
FS/FT Forum Are you looking to make some money? Get rid of some gear? This is the place to sell and buy it all! |
Thread Tools |
08-15-2003, 02:51 PM | #1 |
Cooling Neophyte
Join Date: Jan 2003
Location: SLC, Utah
Posts: 54
|
FS: Water cooling stuff,etc
Cleaning out some parts, all prices include shipping.
1. 3 nib Maxi-jets 1200 pumps - $20 ea 2. Bay-Res reservoir's 1/2 barbs - $20 3. 30' tygon 1/2 id 1/8 wall tubing - 10' @ $13ea 4. AMD 2400+ cpu - does 210x11@1.85v \ 210x11.5@1.90v - $75 5. Techcool 2200 water cooler ext box Info a) replaced cloth intake filter with wire mesh, much better air flow thru rad b) replaced th 2 80cfm exhaust fans with 128cfm fans c) changed internal tubing to 5/8 id d) replaced 79gph pump with 290 gph pump Will sell for $170 shipped. I will include 20' of 1/2 id tygon tubing
__________________
Epox 8RDA+ XP 2500+ 2.472g (12x206) @ 1.85v 9700 pro (385/355) antex 550w truepower ps Thermotek t-252 chiller White Water Block Neo GPU & CS Blk 2 256mg Corsair DDR 3200 C2 3 WD 120g 7200 8mg hd raid 0 HP CDRW Promise TX2000 PCI Raid My Heat Last edited by MichaelMuck; 08-19-2003 at 12:56 PM. |
08-17-2003, 01:33 AM | #2 | |
Cooling Savant
Join Date: Jun 2003
Location: North Billerica, MA, USA
Posts: 451
|
Am I reading your post right?
Quote:
PM me so we can work out details on payment, addresses and all that happy stuff BTW, I'm not particularly interested in it (already have a rad) but on item 7 if that's an automotive heater core, it might help you sell it if you put what the FedCo number is. (or was before the core was modded...) Thanks, Gooserider
__________________
Designing system, will have Tyan S2468UGN Dual Athlon MOBO, SCSI HDDS, other goodies. Will run LINUX only. Want to have silent running, minimal fans, and water cooled. Probably not OC'c |
|
08-19-2003, 01:05 AM | #3 |
Cooling Neophyte
Join Date: Jan 2003
Location: SLC, Utah
Posts: 54
|
yes in 10' uncut
__________________
Epox 8RDA+ XP 2500+ 2.472g (12x206) @ 1.85v 9700 pro (385/355) antex 550w truepower ps Thermotek t-252 chiller White Water Block Neo GPU & CS Blk 2 256mg Corsair DDR 3200 C2 3 WD 120g 7200 8mg hd raid 0 HP CDRW Promise TX2000 PCI Raid My Heat |
08-20-2003, 02:43 AM | #4 |
Cooling Savant
Join Date: Jun 2003
Location: North Billerica, MA, USA
Posts: 451
|
If you don't normally do so, check your PM's
I sent you a PM yesterday, I'm interested in one of the lengths of Tygon hose.
Gooserider.
__________________
Designing system, will have Tyan S2468UGN Dual Athlon MOBO, SCSI HDDS, other goodies. Will run LINUX only. Want to have silent running, minimal fans, and water cooled. Probably not OC'c |
08-20-2003, 08:14 PM | #5 |
Cooling Savant
Join Date: Mar 2002
Location: North Vancouver BC
Posts: 234
|
If you're able to ship to Canada & accept MO, I'd be interested in some of that Tygon.
http://www.heatware.com/eval.php4?id=17793 Lemme know, thanks.
__________________
"mooooo" said the cow. ERTW - UBC P4 2.4B @3.01Ghz 167FSB :: Abit IC7 :: 2x256MB HyperX PC3700 :: ASUS 9600XT :: WD Raptor 2x36GB RAID0 |
08-21-2003, 04:26 AM | #6 |
Cooling Neophyte
Join Date: Jan 2003
Location: SLC, Utah
Posts: 54
|
on cheap stuff shipping kills you mailing to canada, would be cheaper to just buy it online I think
__________________
Epox 8RDA+ XP 2500+ 2.472g (12x206) @ 1.85v 9700 pro (385/355) antex 550w truepower ps Thermotek t-252 chiller White Water Block Neo GPU & CS Blk 2 256mg Corsair DDR 3200 C2 3 WD 120g 7200 8mg hd raid 0 HP CDRW Promise TX2000 PCI Raid My Heat |
08-23-2003, 03:01 AM | #7 |
Cooling Savant
Join Date: Jun 2003
Location: North Billerica, MA, USA
Posts: 451
|
Hey MIKE!
Are you reading your mail???
I've sent you a PM, and posted earlier in this forum that I want to do a deal with you for some of the Tygon. Granted it's not big bucks, but I would like to know if you're interested. If not, let me know and I can go elsewhere... Given your apparent lack of response, I find the previous thread to this one somewhat ironic... Gooserider
__________________
Designing system, will have Tyan S2468UGN Dual Athlon MOBO, SCSI HDDS, other goodies. Will run LINUX only. Want to have silent running, minimal fans, and water cooled. Probably not OC'c |
08-23-2003, 04:04 AM | #8 | |
Cooling Neophyte
Join Date: Jan 2003
Location: SLC, Utah
Posts: 54
|
Re: Hey MIKE!
Quote:
__________________
Epox 8RDA+ XP 2500+ 2.472g (12x206) @ 1.85v 9700 pro (385/355) antex 550w truepower ps Thermotek t-252 chiller White Water Block Neo GPU & CS Blk 2 256mg Corsair DDR 3200 C2 3 WD 120g 7200 8mg hd raid 0 HP CDRW Promise TX2000 PCI Raid My Heat |
|
08-23-2003, 10:33 AM | #9 |
CoolingWorks Tech Guy Formerly "Unregistered"
Join Date: Dec 2000
Location: Posts: 2,371.493,106
Posts: 4,440
|
Michael
got any of those 'secret' wbs ? |
08-23-2003, 01:17 PM | #10 |
Cooling Neophyte
Join Date: Jan 2003
Location: SLC, Utah
Posts: 54
|
nope, a ww and 2 neo moses blocks
__________________
Epox 8RDA+ XP 2500+ 2.472g (12x206) @ 1.85v 9700 pro (385/355) antex 550w truepower ps Thermotek t-252 chiller White Water Block Neo GPU & CS Blk 2 256mg Corsair DDR 3200 C2 3 WD 120g 7200 8mg hd raid 0 HP CDRW Promise TX2000 PCI Raid My Heat |
08-24-2003, 01:02 AM | #11 |
Cooling Savant
Join Date: Jun 2003
Location: North Billerica, MA, USA
Posts: 451
|
OK, I'm sorry if I came across grumpy, but I had sent a couple of messages and wasn't getting a response from you. Then I saw a message from you to someone else, but seeming to ignore my messages which got me annoyed.
I want a 10' length of the Tygon tube. I don't care that much for PayPal, but I can use it if I have to. I prefer to snail a payment to you direct if that is possible. Please PM me with your snail address so that I can send you a payment. I will also be sending you this info in a PM with my mailing address info. Gooserider
__________________
Designing system, will have Tyan S2468UGN Dual Athlon MOBO, SCSI HDDS, other goodies. Will run LINUX only. Want to have silent running, minimal fans, and water cooled. Probably not OC'c |
08-29-2003, 11:29 AM | #12 |
Cooling Neophyte
Join Date: Aug 2003
Location: CA
Posts: 2
|
Tygon still available?
I sent you a PM, but I'll also post here and send a message to Heatware (sorry if that is too many messages, but I'm trying to get the system finished next week)...
I'm interested in the Tygon tubing. Send me a PM whether or not you still have some available. I can paypal the funds immediately. Thanks |
08-29-2003, 11:54 AM | #13 | |
Cooling Savant
Join Date: Nov 2002
Location: portugal
Posts: 635
|
Quote:
Curiosity is killing me too! :shrug: |
|
09-05-2003, 10:56 AM | #14 |
Cooling Neophyte
Join Date: Aug 2003
Location: CA
Posts: 2
|
warning (Edited)
Be careful of the Tygon tubing from this guy. I ordered 10' of it, but he didn't send Tygon tubing. What I received was a dingy yellow colored tubing that smelled like cigarette smoke and was NOT branded by Tygon (I called them and they said all Tygon tubing will have the brand name, the formula type e.g. R-3603, and the registered trademark). This is some other tubing, and is dirty and smelly at that.
Edit: He claims it is C-210-a from Tygon. This formulation is actually Tygothane from the same company that makes Tygon (like a Chevette vs. a Corvette). Tygon R-3603 is what everyone in watercooling uses if they get Tygon; it is clear and holds up well. Tygothane is Polyurethane, is yellowish in color, not as flexible (shore-A rating of 82 vs. 55 for Tygon, and 1.75" bend rad vs. 1.5"), and absorbs a LOT more water (1.24% over 24 hrs at 23 deg C vs. 0.24%). I should have been more explicit before I bought this, especially considering he is selling it for half what stores sell it for... but he should have been more specific about what he was selling. I'm not happy. Last edited by unpimp; 09-05-2003 at 12:10 PM. |
09-05-2003, 11:21 AM | #15 | |
Cooling Neophyte
Join Date: Jan 2003
Location: SLC, Utah
Posts: 54
|
Re: fraud
Quote:
tygon c-210-a formula, yellow tint is normal, sorry about the cig smell. ps: if you were so unhappy you should have given me a chance to refund you your $13 before leaving heat. an email at 1:00 am today doesnt really give me alot of time to fix things?
__________________
Epox 8RDA+ XP 2500+ 2.472g (12x206) @ 1.85v 9700 pro (385/355) antex 550w truepower ps Thermotek t-252 chiller White Water Block Neo GPU & CS Blk 2 256mg Corsair DDR 3200 C2 3 WD 120g 7200 8mg hd raid 0 HP CDRW Promise TX2000 PCI Raid My Heat Last edited by MichaelMuck; 09-05-2003 at 12:43 PM. |
|
09-10-2003, 01:25 AM | #16 |
Cooling Savant
Join Date: Jun 2003
Location: North Billerica, MA, USA
Posts: 451
|
I'm not happy either...
I recieved the peice of tubing that I had ordered today, and, like Unapimp, I am also unhappy.
The tubing was as Unapimp described, yellowish (not a big deal) and smelling of ciggarette smoke. It also had some kind of dirty residue on it, but that may have been manufacturing preservative coating. It was appropriately packaged. However, the tubing was not branded or marked, and was quite stiff. I am not happy with this tubing, and consider Mike's advertising to be somewhat less than honest. However I am also somewhat at fault in that I failed to ask what formulation Tygon he was selling. Mike - I would like to arrange to return the tubing and get a refund of my $13.00, as I would NOT have purchased this tubing if I had known what formulation it was. In the interest of giving you a reasonable chance to respond either here or via PM, I will wait until this Friday, 9/12/03, before leaving negative heat or taking any other action. I am also sending you a copy of this message via PM. (If you respond via PM, I will let folks on this thread know, w/ summary of events) Just FYI... It is worth noting that my MSC big book listing of propeties for TYGON formulations didn't include C210-A, although they do carry Tygothane tubing. It appears they don't consider Tygothane to be 'real' Tygon. Entering a search on McMasters for 'Tygon' gets a totally different set of pages from the results of a search for 'Tygothane' - in other words, searching for Tygon won't give you a listing for C210-A tubing, (But WILL find several other Tygon formulations) and searching for Tygothane won't give you R3603 tubing, or any other Tygon formulations. This implies that McMasters doesn't think of C210-A as 'real' Tygon either. Code:
Per McMasters; Tygothane C210-A vs. Tygon R3603 ID OD Wall Bend rad PSI@73*F P/N $/ft 1/2" 3/4" 1/8" 1 3/4" 46 5549K39 2.31 1/2" 3/4" 1/8" 1 1/2" 25 5554K19 3.42 Tygon Formulation: C- 210-A Temp. Range: - 100° to +175° F Color: Clear Durometer, Shore A: 82 Tensile Strength: 6050 psi Elongation: 500% Sterilization: Not rated Materials Meet: FDA (food and beverage) Fittings: Barbed (see pgs. 111-118) Tygon Formulation: R-3603 Temperature Range: -58° to +165° F Color: Clear Durometer, Shore A: 55 Tensile Strength: 1650 psi Elongation: 450% Sterilization: Steam (auto-clave) and gas Materials Meet: FDA (food and beverage) Fittings: Barbed (see pages 111-118)
__________________
Designing system, will have Tyan S2468UGN Dual Athlon MOBO, SCSI HDDS, other goodies. Will run LINUX only. Want to have silent running, minimal fans, and water cooled. Probably not OC'c |
09-14-2003, 11:22 PM | #17 |
Cooling Savant
Join Date: Jun 2003
Location: North Billerica, MA, USA
Posts: 451
|
I have not yet heard from Michael as of 23:50ESDT on Sunday 9/14.
It appears that Michael has not been on the board since 9/5 when he posted the message complaining about Unapimp having left him negative heat w/o giving him a chance to refund his money. (At least that is the last post that shows in a message search, and he hasn't read the PM that I sent him.) Perhaps a moderator could tell us if he has logged in since then? I just found his e-mail address via Heat, and am sending him a direct e-mail. Perhaps I'm an overly nice guy, but I haven't left negative heat on him yet, as I want to ensure that he has a chance to respond and settle this issue w/out damaging his rep excessively. However, I am rapidly loosing patience with him. I would also suggest that his lack of communication and arguably deceptive advertising might be worth considering when evaluating the conflicting claims in the LiquidRulez thread elsewhere on this forum. (I will say that I had nothing but positive communication with LR outside this forum, and I was somewhat hesitant about dealing with MM because of that thread. However I decided that the amount of money involved wasn't that great, so I took the chance....) Gooserider
__________________
Designing system, will have Tyan S2468UGN Dual Athlon MOBO, SCSI HDDS, other goodies. Will run LINUX only. Want to have silent running, minimal fans, and water cooled. Probably not OC'c |
09-15-2003, 12:27 AM | #18 | |
Pro/Guru - Uber Mod
Join Date: Sep 2002
Location: Indiana
Posts: 834
|
Quote:
2003-09-06 20:14:04 |
|
09-15-2003, 01:44 AM | #19 | |
Cooling Neophyte
Join Date: Jan 2003
Location: SLC, Utah
Posts: 54
|
Quote:
email would have gotten you a quicker response
__________________
Epox 8RDA+ XP 2500+ 2.472g (12x206) @ 1.85v 9700 pro (385/355) antex 550w truepower ps Thermotek t-252 chiller White Water Block Neo GPU & CS Blk 2 256mg Corsair DDR 3200 C2 3 WD 120g 7200 8mg hd raid 0 HP CDRW Promise TX2000 PCI Raid My Heat |
|
09-15-2003, 11:12 PM | #20 | |||
Cooling Savant
Join Date: Jun 2003
Location: North Billerica, MA, USA
Posts: 451
|
Quote:
Quote:
Quote:
Is it necessary to leave you negative heat in order to make you do meaningful communication? Gooserider (A copy of this message will be sent to Michael via E-mail as well...)
__________________
Designing system, will have Tyan S2468UGN Dual Athlon MOBO, SCSI HDDS, other goodies. Will run LINUX only. Want to have silent running, minimal fans, and water cooled. Probably not OC'c |
|||
09-15-2003, 11:54 PM | #21 |
Big PlayerMaking Big Money
Join Date: Aug 2001
Location: irc.lostgeek.com #procooling.com
Posts: 4,782
|
A less than glowing endorsement. Combine this with the shitstorm associated with LiquidRulez and maybe MichaelMuck doesn't need to be trading on this forum.
If you aren't going to check threads and deal with customer relations issues then don't sell anything here. If you can't conduct satisfactory trades then don't trade at all. You should refund these people their money; R1000 or R3603 are the Tygons that people know and love. You are obviously pulling a bait and switch on them. I would have left you a negative evaluation too. |
09-16-2003, 01:15 AM | #22 |
Cooling Neophyte
Join Date: Jan 2003
Location: SLC, Utah
Posts: 54
|
Ok folks, lets see If I can nip this soap in the butt.
1> received 1st email from him on 9/14/2003 10:19pm and read it on 9/15/2003 12:29 AM saying he wanted his money back 2> sent him a reply on 09/15/2003 12:32 am saying "send it back and I will send u the $13 dollars" Okay, so we have a 3 minute lag from me reading it to me sending him a reply, guess I must be getting old, will try next time to cut it down to 2 minutes PS: I have copies of these emails for display if needed. PSS: seems my email to him didnt go thru. what ever the below message means. A message (from <msirott@comcast.net>) was received at 15 Sep 2003 6:32:04 +0000. The following addresses had delivery problems: atorrey@cybercom.net Persistent Transient Failure: Delivery time expired Delivery last attempted at 15 Sep 2003 6:32:04 +0000
__________________
Epox 8RDA+ XP 2500+ 2.472g (12x206) @ 1.85v 9700 pro (385/355) antex 550w truepower ps Thermotek t-252 chiller White Water Block Neo GPU & CS Blk 2 256mg Corsair DDR 3200 C2 3 WD 120g 7200 8mg hd raid 0 HP CDRW Promise TX2000 PCI Raid My Heat Last edited by MichaelMuck; 09-16-2003 at 04:46 AM. |
09-16-2003, 01:33 AM | #23 | |
Cooling Neophyte
Join Date: Jan 2003
Location: SLC, Utah
Posts: 54
|
Quote:
__________________
Epox 8RDA+ XP 2500+ 2.472g (12x206) @ 1.85v 9700 pro (385/355) antex 550w truepower ps Thermotek t-252 chiller White Water Block Neo GPU & CS Blk 2 256mg Corsair DDR 3200 C2 3 WD 120g 7200 8mg hd raid 0 HP CDRW Promise TX2000 PCI Raid My Heat |
|
09-16-2003, 06:16 PM | #24 | |
Cooling Savant
Join Date: Jun 2003
Location: North Billerica, MA, USA
Posts: 451
|
Quote:
I did NOT recieve the message that Mike says he sent, however the error message that he quotes is consistent with it not making it to me. The content of the message saying to return the tubing is what I had been looking for, and the response time he quotes is reasonable so I will drop my beef in that regard (though I'm mildly surprised that Mike wasn't checking here more often, I agree that direct e-mail was a better way of communicating.) It is to late tonight to make it to the PO or UPS, but I will attempt to get the package out to return it tomorrow afternoon. Assuming the refund gets here in a reasonable time after that, I will be as happy as one can be under the circumstances. Gooserider
__________________
Designing system, will have Tyan S2468UGN Dual Athlon MOBO, SCSI HDDS, other goodies. Will run LINUX only. Want to have silent running, minimal fans, and water cooled. Probably not OC'c |
|
09-17-2003, 09:07 PM | #25 |
Cooling Savant
Join Date: Jun 2003
Location: North Billerica, MA, USA
Posts: 451
|
Package went out this afternoon.
I reused the packaging that Mike sent the tubing to me in, Postage (Including signature record) was $7.00 and change, almost seems silly in order to get $13.00 back, but... Gooserider
__________________
Designing system, will have Tyan S2468UGN Dual Athlon MOBO, SCSI HDDS, other goodies. Will run LINUX only. Want to have silent running, minimal fans, and water cooled. Probably not OC'c |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
|
|