Go Back   Pro/Forums > ProCooling Technical Discussions > Xtreme Cooling
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

Xtreme Cooling LN2, Dry Ice, Peltiers, etc... All the usual suspects

Reply
Thread Tools
Unread 12-29-2008, 02:12 AM   #1
Steven-1979
Cooling Neophyte
 
Join Date: Dec 2008
Location: USA
Posts: 1
Default Thoughts on adding tec cooling to a WC loop

Thoughts on the idea of adding a weak tec pelt into a WC loop to help bring down the temps by a few more degrees? This is a schematic I came up with after some discussion with ben333. Right now, I'm debating between directly tec chilling the cpu/gpu or doing this. The benefit of this is that it would just cool the water a little and hopefully I won't have to worry about condensation etc. While if I go the direct cooling way, I'd have to get very powerful pelts (200w for the cpu and 300w for the gpu) and would then have to start worrying about things like condensation?

ps- there is an error in the pic ... the water should be going from the cpu -> gpu -> 120.2 radiator not to the rad before the gpu
Attached Images
File Type: gif Image3.gif (31.6 KB, 15 views)
Steven-1979 is offline   Reply With Quote
Unread 10-11-2009, 04:11 AM   #2
desone
Cooling Neophyte
 
Join Date: Oct 2009
Location: Brisbane
Posts: 2
Default Re: Thoughts on adding tec cooling to a WC loop

Quote:
Originally Posted by Steven-1979 View Post
Thoughts on the idea of adding a weak tec pelt into a WC loop to help bring down the temps by a few more degrees? This is a schematic I came up with after some discussion with ben333. Right now, I'm debating between directly tec chilling the cpu/gpu or doing this. The benefit of this is that it would just cool the water a little and hopefully I won't have to worry about condensation etc. While if I go the direct cooling way, I'd have to get very powerful pelts (200w for the cpu and 300w for the gpu) and would then have to start worrying about things like condensation?

ps- there is an error in the pic ... the water should be going from the cpu -> gpu -> 120.2 radiator not to the rad before the gpu
Peltiers generate lots of heat. There is no way I would put one inside your case, in the setup in your drawing.

I built one up out of two 68 watt peltiers. You need a very efficient waterblock to transfer the cold to the water and to get rid of the heat generated.

I used three copper socket 478 heatsinks. I made a waterblock out of one which was very efficient and used the other two on the hot side of the two peltiers. It knocked 5 degrees centigrade off the water loop and about 2 degrees centrigrade off the inside case temp. I had two radiators mpunted internally. The chilled water first went into a 120 mm radiator with 120mm fan in two 51/4 inch drive bays. The radiator is mounted flat with the fan on top. In the bay above this was mounted a fan controller/temp monitor. It was hollow in the middle and allowed more clearance for the fan.

The outupt from the cpu went into a copper radiator mounted internally at the rear of the case with two 80mm fans suking the hot air to the outside at the rear of the case. The peltier heat exchanger was mounted on top of the case outside.

Two 90mm 3,800 rpm fans cooled the two hot copper heatsinks. I insulated bare spots between the hot and cold surfaces of the waterblock and hot copper heatsinks with foam rubber to prevent hot/cold leakage.

The while setup is portable but heavy. Just make sure there are no leaks in the setup.
desone is offline   Reply With Quote
Unread 11-16-2009, 06:53 PM   #3
ben333
Uber Pro/Mods
 
ben333's Avatar
 
Join Date: Aug 2007
Location: New Hampshire (USA) Posts: Two hundred somethin
Posts: 432
Default Re: Thoughts on adding tec cooling to a WC loop

I'm glad this was pleasure for you. Are you in with every vendor of bluetooth headsets or do you need assistance making a link?
__________________
Pro Slacker
ben333 is offline   Reply With Quote
Unread 11-18-2009, 02:41 PM   #4
billbartuska
Cooling Savant
 
Join Date: Jun 2005
Location: Skokie, Illinois
Posts: 322
Default Re: Thoughts on adding tec cooling to a WC loop

Quote:
Originally Posted by ben333 View Post
I'm glad this was pleasure for you. Are you in with every vendor of bluetooth headsets or do you need assistance making a link?
Ben333, that's pretty cynical.........

LOL
__________________
My new rig....
Intel SE440BX-3, PIII 550 (@ 680)
MX440 275/332 (@ 350/400) and 3DFX Voodo 5 5500 160/160 (@180/180)
Two Opticals and 120 gigs (w/28gigs in RAID0) on 4 Maxstors
billbartuska is offline   Reply With Quote
Unread 11-19-2009, 03:51 PM   #5
ben333
Uber Pro/Mods
 
ben333's Avatar
 
Join Date: Aug 2007
Location: New Hampshire (USA) Posts: Two hundred somethin
Posts: 432
Default Re: Thoughts on adding tec cooling to a WC loop

Woah, I thought I did something silly for a second, heh. I deleted another post by the same member and did the 'delete all posts' option. Someone above me had posted a snippet about selling headsets and then in his signature had just the text "bluetooth headsets".
__________________
Pro Slacker
ben333 is offline   Reply With Quote
Unread 03-08-2011, 11:41 PM   #6
jonusb5
Banned
 
Join Date: Mar 2011
Location: canada
Posts: 9
Default Re: Thoughts on adding tec cooling to a WC loop

During the first ny asian escort century the Romans came and ruled Britain.They brought ny asian escorts with them many of their festivals and customs.One of these was the festival know as Pomona Day,named for their god ny escorts dess of fruits and gardens.It was celebrated around the 1st of November.After hundreds of years of Roman rule the Celtic's ny escort Samhain festival and the Roman Pomona Day mixed becoming one important autumn holiday.
jonusb5 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:44 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...