|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
Thread Tools |
12-09-2002, 05:07 PM | #2 |
Responsible for 2%
of all the posts here. Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
|
What FSB are you running?
|
12-09-2002, 05:30 PM | #3 |
Cooling Neophyte
Join Date: Sep 2002
Location: near Austin
Posts: 96
|
right now?
12.5 x 188 = 2350 initially I played with the 15x multi but 15 x 157 'felt' quite a bit slower. If it can operate at 15 x 166 at a lower V after some 'cooking' on my part I'll run it there. BTW the max V I tried was 2.19...I started to get nervous and just quit. I can crank it up to an indicated 2.3but have no desire to go there. the 2550 was 15 x 170 wj |
12-09-2002, 06:08 PM | #4 |
Responsible for 2%
of all the posts here. Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
|
I agree. From everything I've seen, running above 1.85 seems to be "asking for it". Mem volt at 2.8 or 2.9, but not higher seems to be in order.
|
12-09-2002, 07:08 PM | #5 |
Cooling Neophyte
Join Date: Jun 2002
Location: By the computer
Posts: 51
|
you should get a dremel and unlock the multiplier. Be daring with that dremel.
__________________
AMD Athlon XP 1900+ Water Cooled Soyo SY-K7V Dragon plus! 512 DDR radoen 9500 Soft Mod Give Me Money |
12-10-2002, 09:21 AM | #6 | |
Cooling Neophyte
Join Date: Sep 2002
Location: near Austin
Posts: 96
|
Quote:
wj |
|
12-10-2002, 10:10 AM | #7 |
Thermophile
Join Date: Aug 2002
Location: Just shut up ;) ...
Posts: 1,068
|
Nah use a front door key, only thing to unlock a 6entuim is a frontdoor key, you'll prolly need the 9remel to get it of the key ring though ...
|
12-11-2002, 06:22 PM | #8 |
Cooling Neophyte
Join Date: Jun 2002
Location: By the computer
Posts: 51
|
to unlock the multiplier ratio on amd xp 2100+ (i think) you need a dremel and to be daring by fooling the computer into thinking its a 1600+, that will unlock it.
Heres a link http://www.pcstats.com/articleview.c...id=1009&page=2
__________________
AMD Athlon XP 1900+ Water Cooled Soyo SY-K7V Dragon plus! 512 DDR radoen 9500 Soft Mod Give Me Money |
12-11-2002, 07:03 PM | #9 |
Been /.'d... have you?
Join Date: Jul 2002
Location: Moscow, ID
Posts: 1,986
|
He's using a 2400+, meaning he only has to link the last L3 bridge. Dremeling is bad. Very bad.
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied |
12-12-2002, 04:32 AM | #10 |
Thermophile
Join Date: Aug 2002
Location: Just shut up ;) ...
Posts: 1,068
|
They were using an Engraver set at the lowest setting as well, not a Dremel!...
If I was to do that I'd use either a scalpal blade(very gently!!) or some high graded 1200+ wen&dry folded over into a 'sharp edge' and gently(!!) sand the trace away. the trouble is there are traces under the surface as well. when joining the bridges to 'unlock' an XP you have to be careful not to sand away to much of the green laminate surface, if you do there is a copper trace underneath that if the 'electrical conduct paint' touches it outside of the bridges 'oval' shaped enclosure) it locks the multiplyer at 11x (I think it's 11 anyway)... Last edited by MadDogMe; 12-12-2002 at 04:38 AM. |
12-12-2002, 02:51 PM | #11 |
Cooling Neophyte
Join Date: Sep 2002
Location: near Austin
Posts: 96
|
airspirit was correct,
it is a 2400 and all I had to do was jump the one bridge. I painted it but my buddy did the wire trick. pretty easy. wj |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|