Go Back   Pro/Forums > ProCooling Geek Bits > Hardware and Case Mod's
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

Hardware and Case Mod's You Paint it, Cut it, Solder it, bend it, light it up, make it glow or anything like that, here is your forum.

Reply
Thread Tools
Unread 09-16-2010, 06:54 PM   #1
Riado
Cooling Neophyte
 
Join Date: Sep 2010
Location: Melbourne, Australia
Posts: 1
Power LED mod

Hi all,

I would really appreciate your help in this matter if you can, as I looked in a lot of areas for many hours and couldn't find the right information.

I need to build a small circuit board having a bi-color LED to indicate a power ON state (Green or whatever) and S3 standby state (amber or whatever). And need the LED to turn off when computer in OFF state.

I have established that I need to use the 5vsb (brown wire - pin 9 from the atx power supply) but this will lit the LED even when computer is in OFF state.

So, later I found that I need to use a NAND gate to achieve the desired results. But I have no idea what a NAND gate is, neither what wires I need to use.

Thanks again for looking into this.
Riado
Riado is offline   Reply With Quote
Unread 11-15-2010, 11:34 AM   #2
PC-thrasher
Cooling Neophyte
 
Join Date: Nov 2010
Location: Twin Cities, MN
Posts: 2
Default Re: Power LED mod

It is very siomple in itself. You just need a bi-color LED, preferably a 3-pin LED, RED/GREEN, and two small cables with the ends having flat plus that fit over the PC's front panel indicators. Try with 330 ohms, but if they are too dim, you do not need them. The output of the front panel connectors has current limiting built-in, so the bi-color LED can be connect directly without current litiming resistors. See my diagram below here.

3pin LED.jpg

The bi-color LED can be purchased at Radio Shack, or online here...
http://www.allelectronics.com/make-a...-3-LEAD/1.html

If you use 2-pin bi-color LED, you will need more complicate driving circuit.

Hope this help.
PC-thrasher is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:38 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...