one first mod in 2 stages

FuRi0 · 02-03-2006, 01:41 PM

1st stage (before liquid cooling)
1. CNCed side (god i loved that engineering course)
2. find where hole had to go on perspex
3. drill hole
4. paint
5. fit perspex
6. add miscilanious items
7. end result

2nd stage (luiqud cooling)
1. buy wire mesh
2. cut mesh for fan guard
3. make mount for rad with left over mesh
4. drill holes in case
5. by grommets
6. fit it together
7. end result

what you guys think

FuRi0 · 02-04-2006, 05:26 AM

why no comments ?

Brians256 · 02-04-2006, 11:40 AM

Well, it's interesting, but it's mostly the same thing as a bunch of commercial cases, isn't it? Also, needs better pictures. It's very grainy.

FuRi0 · 02-04-2006, 11:57 AM

it was a quick mod to see if i could use the cnc machines to mod
im doing a mod on a chenming/cheiftec case atm but i dont have the availabilty of a cnc machiune now so everything is being dremilled

the picture is a bit grainy due to my camera being absouluty nackered
i only get payed 6 grand a year (GBP) so availability to mad mods is low

blue68f100 · 02-05-2006, 08:19 PM

If your going to have clear sides the wiring is suppose to be top notched.

Brians256 · 02-06-2006, 01:44 PM

Well, keep on moddin. The lack of major response is mostly due to the fact that your mod isn't all that novel. It's not bad, just not anything that most here would say "Wow!" over. So, clean up that wiring and add some novel twists on cooling!

Welcome here, btw. Hopefully, this site will be a good resource for you.

FuRi0 · 02-09-2006, 06:06 PM

ta m8

02-03-2006, 01:41 PM	#1
FuRi0 Cooling Neophyte Join Date: Feb 2006 Location: Northern ireland Posts: 21	one first mod in 2 stages 1st stage (before liquid cooling) 1. CNCed side (god i loved that engineering course) 2. find where hole had to go on perspex 3. drill hole 4. paint 5. fit perspex 6. add miscilanious items 7. end result 2nd stage (luiqud cooling) 1. buy wire mesh 2. cut mesh for fan guard 3. make mount for rad with left over mesh 4. drill holes in case 5. by grommets 6. fit it together 7. end result what you guys think

02-04-2006, 05:26 AM	#2
FuRi0 Cooling Neophyte Join Date: Feb 2006 Location: Northern ireland Posts: 21	Re: one first mod in 2 stages why no comments ?

02-04-2006, 11:40 AM	#3
Brians256 Pro/Staff Join Date: Oct 2001 Location: Klamath Falls, OR Posts: 1,439	Re: one first mod in 2 stages Well, it's interesting, but it's mostly the same thing as a bunch of commercial cases, isn't it? Also, needs better pictures. It's very grainy.

02-04-2006, 11:57 AM	#4
FuRi0 Cooling Neophyte Join Date: Feb 2006 Location: Northern ireland Posts: 21	Re: one first mod in 2 stages it was a quick mod to see if i could use the cnc machines to mod im doing a mod on a chenming/cheiftec case atm but i dont have the availabilty of a cnc machiune now so everything is being dremilled the picture is a bit grainy due to my camera being absouluty nackered i only get payed 6 grand a year (GBP) so availability to mad mods is low

02-05-2006, 08:19 PM	#5
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: one first mod in 2 stages If your going to have clear sides the wiring is suppose to be top notched.

02-06-2006, 01:44 PM	#6
Brians256 Pro/Staff Join Date: Oct 2001 Location: Klamath Falls, OR Posts: 1,439	Re: one first mod in 2 stages Well, keep on moddin. The lack of major response is mostly due to the fact that your mod isn't all that novel. It's not bad, just not anything that most here would say "Wow!" over. So, clean up that wiring and add some novel twists on cooling! Welcome here, btw. Hopefully, this site will be a good resource for you.

02-09-2006, 06:06 PM	#7
FuRi0 Cooling Neophyte Join Date: Feb 2006 Location: Northern ireland Posts: 21	Re: one first mod in 2 stages ta m8

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)