|
|
Hardware and Case Mod's You Paint it, Cut it, Solder it, bend it, light it up, make it glow or anything like that, here is your forum. |
Thread Tools |
02-20-2003, 03:23 PM | #1 |
Cooling Neophyte
Join Date: Nov 2002
Location: Denmark
Posts: 2
|
Lapping my GPU, help needed! *pics*
I've just finished my watercooled system - nice!
Although now, I am getting very tired of the high temps on my GPU (it was running at about 53 degrees celsius at idle)... So, I took of the waterblock, and discovered the problem at once... The waterblock had almost no contact with the center of the GPU! So I had two choices, using more AS3, or lapping the GPU - I chose the last option... So now, here I am, using sandpaper K600, K1200, K2000 and a heatsink (its level), but how long do I dare go - before I ruin my GPU? Never tried this before, plz help me! Pictures of my progress so fare can be seen here: http://www.broze.dk/lap/ (Also shows the concavety of the GPU )
__________________
T-Bird 900@900 512mb ram 1x 18gb 7200rpm WD TI4200 - 128mb ram Liteon 32x cdr |
02-20-2003, 05:25 PM | #2 |
Cooling Neophyte
Join Date: Nov 2002
Location: Denmark
Posts: 2
|
No help
Anyway, the lapping I did (see pictures) really helped! I get temps at about 39 degrees idle now, instead of 51 degrees!
__________________
T-Bird 900@900 512mb ram 1x 18gb 7200rpm WD TI4200 - 128mb ram Liteon 32x cdr |
02-21-2003, 11:10 AM | #3 |
Put up or Shut Up
Join Date: Dec 2001
Location: Spokane WA
Posts: 6,506
|
Most people do not have the balls to lap a GPU, including myself. Looks good though. Not exactly a good idea if it your only card or an expensive card. That can very easily kill it. Kinda odd how concaved they are. You would think they would go through the extra effort to make a good mating surface as hot as these things are getting.
Last edited by jaydee116; 02-21-2003 at 12:47 PM. |
02-21-2003, 11:26 AM | #4 |
Cooling Savant
Join Date: Aug 2001
Location: SLO, CA
Posts: 837
|
Heh... too bad I cant lap my 9700...
__________________
Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10) OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings) DFI LANParty nForce4 Ultra-D SCSI Raid 5 x (3) Cheetah 15K HDDs LSI Express 500 (128MB cache) OCZ PowerStream 520W PSU ATI X850XT PE (Stock) DTEK WhiteWater + DTEK Custom Radiator Eheim 1250 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|