I have the Maze 3 for AMD. Am switching to PIV. What do I do?

ECUPirate · 05-19-2002, 11:16 AM

Read topic.

Do I just order the different top from DDen?

I also need a block for my GF3. Are the DDen blocks good?

Cieprus · 05-19-2002, 11:40 AM

Try this...

Cyco-Dude · 05-19-2002, 12:15 PM

yeah just get the P4 top...

Brad · 05-20-2002, 05:35 AM

just get the P4 top, and you might be best to buy a new o-ring too

DigitalChaos · 05-20-2002, 06:54 AM

and how is it that a P4 top will fit on an amd block? the mounting holes in the block match the top... therefore a P4 top will not work.

email DD

Cyco-Dude · 05-20-2002, 10:35 AM

the plexi top is most likely oversized. they do have them for sale, you can see on this page under Maze3 items.

Daredevil · 05-20-2002, 10:59 AM

Just e-mail Danny there at Dangerden. I had some questions about some stuff I am oredering from him and I e-mailed him. He sent a very quick, informative, and polite response. I'm sure talking to him directly would be your best bet.

05-19-2002, 11:16 AM	#1
ECUPirate Hottest Stank of them All Join Date: Mar 2002 Location: Washington, DC area Posts: 533	I have the Maze 3 for AMD. Am switching to PIV. What do I do? Read topic. Do I just order the different top from DDen? I also need a block for my GF3. Are the DDen blocks good? __________________ Does a radioactive cat have 18 half lifes? --Kenny my pimpin' rig: ...previously poorly cooled... 486DX-2 66mhz @ 75mhz, 4Mb ram, shared, 256Mb hard drive Onboard VGA, watercooled, of course 16-color monitor, labtec speakers, 28kbs USRobotics modem Windows XP (think about it) Maze 3, DDen GF3 block, Eheim 1250, econoline van HC, 1/2" hose w/ 5/8" fittings Comair 172mm fan

05-20-2002, 05:35 AM	#4
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	just get the P4 top, and you might be best to buy a new o-ring too __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

05-19-2002, 11:40 AM	#2
Cieprus Cooling Savant Join Date: May 2002 Location: ~America~ Posts: 180	Try this...

05-19-2002, 12:15 PM	#3
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	yeah just get the P4 top...

05-20-2002, 06:54 AM	#5
DigitalChaos Cooling Savant Join Date: Jan 2002 Location: Waukesha, Wi Posts: 698	and how is it that a P4 top will fit on an amd block? the mounting holes in the block match the top... therefore a P4 top will not work. email DD

05-20-2002, 10:35 AM	#6
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	the plexi top is most likely oversized. they do have them for sale, you can see on this page under Maze3 items.

05-20-2002, 10:59 AM	#7
Daredevil Cooling Neophyte Join Date: Apr 2002 Location: College Station, TX Posts: 3	Just e-mail Danny there at Dangerden. I had some questions about some stuff I am oredering from him and I e-mailed him. He sent a very quick, informative, and polite response. I'm sure talking to him directly would be your best bet.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)