172 or 156 watt pelt what PSU?

OcPunK · 02-15-2002, 04:00 AM

Would http://www.allelectronics.com/cgi-bi...m=PS-550&type= that work? oh and whats the best place to get a pelt from?

futRtrubL · 02-15-2002, 11:01 AM

That depends on what pelts you use. That only puts out 144W on the 12V line. If you can run your pelt off the 5V line then you are set, that gives out 425W. Since these add up to over the 550W rated for all outputs I wouldn't go near these figuers. That's also not including the other outputs.

PS Damn that's cheap!

Edward

Brad · 02-15-2002, 05:51 PM

if you want to run at 15v pelt, buy 3 of those and run it off the 5v line, you could use like 5 of them

24v pelt, buy 4 of them to run the pelts at 20v

OcPunK · 02-18-2002, 01:51 PM

Could I get 2 of them and run a 24V pelt? And are there any hot to's on hooking up the pelts in line?

Brad · 02-19-2002, 12:52 AM

you could, but it would barely run a 172w.

hooking pelts up inline is easy, red to black, red to black, etc

OcPunK · 02-19-2002, 01:00 AM

But that would be better then a 156watt at 12V right?

Brad · 02-19-2002, 01:35 AM

yes

mkosem · 02-21-2002, 04:54 PM

get this one!

--Matt

02-15-2002, 04:00 AM	#1
OcPunK Cooling Savant Join Date: Jun 2001 Location: Under ground cave in PA to keep PCs cool! Posts: 125	172 or 156 watt pelt what PSU? Would http://www.allelectronics.com/cgi-bi...m=PS-550&type= that work? oh and whats the best place to get a pelt from? __________________ www.1337info.com

02-15-2002, 05:51 PM	#3
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	if you want to run at 15v pelt, buy 3 of those and run it off the 5v line, you could use like 5 of them 24v pelt, buy 4 of them to run the pelts at 20v __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

02-18-2002, 01:51 PM	#4
OcPunK Cooling Savant Join Date: Jun 2001 Location: Under ground cave in PA to keep PCs cool! Posts: 125	Could I get 2 of them and run a 24V pelt? And are there any hot to's on hooking up the pelts in line? __________________ www.1337info.com

02-19-2002, 12:52 AM	#5
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	you could, but it would barely run a 172w. hooking pelts up inline is easy, red to black, red to black, etc __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

02-19-2002, 01:00 AM	#6
OcPunK Cooling Savant Join Date: Jun 2001 Location: Under ground cave in PA to keep PCs cool! Posts: 125	But that would be better then a 156watt at 12V right? __________________ www.1337info.com

02-15-2002, 11:01 AM	#2
futRtrubL Cooling Savant Join Date: Jul 2001 Location: Kingston, Jamaica Posts: 204	That depends on what pelts you use. That only puts out 144W on the 12V line. If you can run your pelt off the 5V line then you are set, that gives out 425W. Since these add up to over the 550W rated for all outputs I wouldn't go near these figuers. That's also not including the other outputs. PS Damn that's cheap! Edward

02-19-2002, 01:35 AM	#7
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	yes __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

02-21-2002, 04:54 PM	#8
mkosem Cooling Savant Join Date: May 2001 Location: here Posts: 494	get this one! --Matt __________________ If you can't cool it, blow it up!! http://www.mattkosem.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)