Go Back   Pro/Forums > ProCooling Technical Discussions > Heatsink/ Heat Pipe / ThermoSiphon Cooling
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

Heatsink/ Heat Pipe / ThermoSiphon Cooling The cat will only make the mistake of putting its paw by your HSF once. :) Also the place to discuss the new high end heat pipe goodness.

Reply
Thread Tools
Unread 11-07-2002, 10:37 AM   #1
Som
Cooling Neophyte
 
Join Date: Oct 2002
Location: UK
Posts: 17
Default Aluminium case vs. steel - temp. difference?

Does using a alu case REALLY lower overall system temp? The whole thing is supposed to act as a heatsink to lower internal temp to ambient, which makes some sort of sense, but does it work? Any good comparison reviews anywhere?

Ta!
Som is offline   Reply With Quote
Unread 11-07-2002, 10:49 AM   #2
bigben2k
Responsible for 2%
of all the posts here.
 
bigben2k's Avatar
 
Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
Default

I don't believe that it does, and if there is any effect, it would be negligeable.

Aluminium is the prime material for air cooling though, but since it's not in direct physical contact with a heat source, all it would do is receive heat from the air in the case, and transmit it to air outside the case. Steel would do that too, but less efficiently.

All in all, there are other factors that are far, far more important in keeping the inside of a case cool, like airflow.

The hype about Alu cases is blown way out of proportion, In My Opinion...
bigben2k is offline   Reply With Quote
Unread 11-07-2002, 11:01 AM   #3
mfpmax
Cooling Savant
 
Join Date: Oct 2000
Location: Rockledge,FL,US
Posts: 731
Default

myth?

*read sales gimmick
__________________
My old and retired watercooling setup.
Watercooled K6-2 450 at 600
Also Retired - Watercooling an XP1800@1782MHz
mfpmax is offline   Reply With Quote
Unread 11-07-2002, 03:16 PM   #4
ezlid
Cooling Neophyte
 
Join Date: Sep 2001
Location: Houston, TX
Posts: 55
Default Re: Aluminium case vs. steel - temp. difference?

Quote:
Originally posted by Som
The whole thing is supposed to act as a heatsink to lower internal temp to ambient, which makes some sort of sense, but does it work?

Ta!
Sorry, but the purpose is to organize and protect the guts of your system. It isn't designed to act as heatsink to lower the internal temps. Thats left to the blowing and sucking fans! I have never believed that an aluminium case is cooler than an a steel case. They are just the "fad" at the moment. If AL cases were meant to lower internal temps, they would have fins on the sides to help. UMMM?
ezlid is offline   Reply With Quote
Unread 11-07-2002, 06:05 PM   #5
bigdawginva
Cooling Savant
 
Join Date: Oct 2002
Location: VA
Posts: 104
Default

And, of course, one of pHaestus' 5 myths about cooling...
http://www.procooling.com/articles/h..._-_phaes.shtml
bigdawginva is offline   Reply With Quote
Unread 11-09-2002, 08:12 AM   #6
peregrine
Cooling Neophyte
 
peregrine's Avatar
 
Join Date: Oct 2002
Location: Australia
Posts: 15
Default

Let's say you wanted to fry some eggs. How long would they take to fry if you were holding the pan 2 feet above the stove? That's how effective Al cases are at cooling your system.
__________________
AthlonXP 1900+ @ 1.75Ghz; 1.85V - Alpha PAL 8045 w. 50cfm Sunon
AOpen AK77-8x Max
Leadtek Winfast GF3 ti-200
peregrine is offline   Reply With Quote
Unread 11-09-2002, 11:10 AM   #7
bigben2k
Responsible for 2%
of all the posts here.
 
bigben2k's Avatar
 
Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
Default

Quote:
Originally posted by peregrine
Let's say you wanted to fry some eggs. How long would they take to fry if you were holding the pan 2 feet above the stove? That's how effective Al cases are at cooling your system.
Actually, to compare it more acurately, imagine an Alu skillet versus a cast iron frying pan, in the same setup.
bigben2k is offline   Reply With Quote
Unread 11-09-2002, 12:07 PM   #8
g.l.amour
Cooling Savant
 
g.l.amour's Avatar
 
Join Date: Mar 2002
Location: on da case
Posts: 933

good one
g.l.amour is offline   Reply With Quote
Unread 11-10-2002, 10:44 AM   #9
peregrine
Cooling Neophyte
 
peregrine's Avatar
 
Join Date: Oct 2002
Location: Australia
Posts: 15
Default

I wasn't comparing the two, but you make a good point
__________________
AthlonXP 1900+ @ 1.75Ghz; 1.85V - Alpha PAL 8045 w. 50cfm Sunon
AOpen AK77-8x Max
Leadtek Winfast GF3 ti-200
peregrine is offline   Reply With Quote
Unread 11-10-2002, 02:44 PM   #10
golovko
Cooling Savant
 
golovko's Avatar
 
Join Date: Mar 2002
Location: Purdue University, USA
Posts: 141
Default

ive had two aluminum cases and three steel cases and I haven't really noticed much of a difference in ambient temps as forementioned above; however, I would never go back to steel after having aluminum for the sole reason of weight, which makes a huge difference especially when watercooling (if you plan on moving your case around)
golovko is offline   Reply With Quote
Unread 11-10-2002, 03:14 PM   #11
Som
Cooling Neophyte
 
Join Date: Oct 2002
Location: UK
Posts: 17
Default

Thanks everybody.
Looks like it'll be steel then!

Som
Som is offline   Reply With Quote
Unread 11-10-2002, 11:41 PM   #12
Can O' Beans
Cooling Savant
 
Join Date: Aug 2002
Location: Pa - USA
Posts: 264
Default

Thinking about it...

The only cooling advantage might be in the hard drive mounting.

If the hard drive rack was of at least somewhat decent thickness, it would help draw & spread out the heat from the hard drives, creating a larger surface area to dissapate their heat. Probably wouldn't help overall temps much, but might help keep the drives just a few degrees cooler.
Can O' Beans is offline   Reply With Quote
Unread 11-11-2002, 12:19 AM   #13
mfpmax
Cooling Savant
 
Join Date: Oct 2000
Location: Rockledge,FL,US
Posts: 731
Default

What I want to do is see the weight difference...

Thats the only reason why I'd get aluminium...as I've come to find my Antec SX635 is quite heavy...if they make a Aluminum version...which will most likely be Black or Silver...i'd like to get my hands on just the chassis and transfer my beige parts over...
__________________
My old and retired watercooling setup.
Watercooled K6-2 450 at 600
Also Retired - Watercooling an XP1800@1782MHz
mfpmax is offline   Reply With Quote
Unread 11-11-2002, 03:46 AM   #14
ATLPIMP
Cooling Neophyte
 
ATLPIMP's Avatar
 
Join Date: Aug 2002
Location: Atlanta GA
Posts: 16
Default

When I went from an Antec 1000 to a Coolermaster ATC-201, my temps dropped... but I couldn't conclude that it was based solely on the material of the case. Structural, there's a big difference between the two.:shrug:
__________________
-ATLPIMP
ATLPIMP is offline   Reply With Quote
Unread 11-12-2002, 03:03 AM   #15
MadDogMe
Thermophile
 
MadDogMe's Avatar
 
Join Date: Aug 2002
Location: Just shut up ;) ...
Posts: 1,068
Default

Quote:
Aluminium is the prime material for air cooling though,
Why?...
MadDogMe is offline   Reply With Quote
Unread 11-12-2002, 04:12 AM   #16
peregrine
Cooling Neophyte
 
peregrine's Avatar
 
Join Date: Oct 2002
Location: Australia
Posts: 15
Default

Copper is heavy, harder to work with and easy to warp/distort.

That means a heatsink that can be more expensive and weigh more than half a kilo (this on a fragile cpu). Most people just aren't willing to go this far for cooling.

edit: forgot to mention i was talking about copper
__________________
AthlonXP 1900+ @ 1.75Ghz; 1.85V - Alpha PAL 8045 w. 50cfm Sunon
AOpen AK77-8x Max
Leadtek Winfast GF3 ti-200

Last edited by peregrine; 11-19-2002 at 10:27 AM.
peregrine is offline   Reply With Quote
Unread 11-12-2002, 08:03 AM   #17
quokked
Cooling Neophyte
 
quokked's Avatar
 
Join Date: Jun 2002
Location: Melbourne Australia
Posts: 3
Default

Of course u could always do something crazy like this http://www.geocities.jp/numano3/backhe.html of course and hook up your CPU to the case, this would work probably VERY well in a Al Case
__________________
Nothing is impossible: Somethings are not worth the effort to achieve
quokked is offline   Reply With Quote
Unread 11-12-2002, 09:58 AM   #18
bigben2k
Responsible for 2%
of all the posts here.
 
bigben2k's Avatar
 
Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
Default

Quote:
Originally posted by MadDogMe
Why?...
The combination of the density and heat transfer make Aluminium ideal for air cooling. I'd refer you to Dave's article, but I can't find it.

Nice link, Quokked. I like the idea of adding a heatsink on the back of the mobo.
bigben2k is offline   Reply With Quote
Unread 11-12-2002, 09:56 PM   #19
golovko
Cooling Savant
 
golovko's Avatar
 
Join Date: Mar 2002
Location: Purdue University, USA
Posts: 141
Default

Quote:
Originally posted by bigben2k
The combination of the density and heat transfer make Aluminium ideal for air cooling. I'd refer you to Dave's article, but I can't find it.

Nice link, Quokked. I like the idea of adding a heatsink on the back of the mobo.
Bigben is right on this one, just to give you an idea, heres the different thermal conductivities of common metals discussed in these forums:

Aluminum: 237
Copper: 401
Silver: 429
Steel: 15.1

higher is better, all measurements in (W/m*K)

You can see from this that for heatsinks, silver would be ideal, but for price/performance ratio copper definitely wins.
golovko is offline   Reply With Quote
Unread 11-23-2002, 05:32 AM   #20
MadDogMe
Thermophile
 
MadDogMe's Avatar
 
Join Date: Aug 2002
Location: Just shut up ;) ...
Posts: 1,068
Default

Oh right ease of manufacture and all that!, I thought you were gonna give me the "Alu gives up heat better than Cu" speel ...

I dont think putting a HS on the back of the CPU would do alot, but it's something I've been meaning to do to my GPU for an age!, GPU is actualy mounted so there is some conduction, the air under the CPU socket makes it pointless IMO :shrug: ...

The NB would benifit too...

I thought about putting a small quiet(40mm/50mm) fan under the mobo drawing air under and venting through the mobo mounting panel/tray. do you think it's worth it?, would it cool the PCB/components down worth a damn?...
MadDogMe is offline   Reply With Quote
Unread 11-23-2002, 04:51 PM   #21
Blackeagle
Thermophile
 
Join Date: Oct 2002
Location: U.S.A = Michigan
Posts: 1,243
Default

HOw about mounting a small fan on the outside case wall just as is done for side blowers on the other side of the case. It would draw in outside cool air, through a small duct to the MB plate, then have a hole cut into the MB plate to let that cool air hit the back of the MB and spread out from there.

I have to think some have done this before, outcome?
Blackeagle is offline   Reply With Quote
Unread 11-24-2002, 01:11 AM   #22
MadDogMe
Thermophile
 
MadDogMe's Avatar
 
Join Date: Aug 2002
Location: Just shut up ;) ...
Posts: 1,068
Default

Same difference! ...

I was thinking of doing it mainly because I was getting higher system/mobo temps than I was CPU temps!!!, found out it's cause the thero' is at the usual bottom left of the mobo and I have a SoundBastard 5.1 in the lowest PCI slot. those S(o)B's get very hot!, for what they are anyways ...

Sys/mobo temp : 31DegC
CPU/Socket temp : 32DegC
Ambient/room temp : 22~23DegC
MadDogMe is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:51 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...