|
|
Hardware and Case Mod's You Paint it, Cut it, Solder it, bend it, light it up, make it glow or anything like that, here is your forum. |
Thread Tools |
02-18-2002, 06:34 PM | #1 |
Cooling Savant
Join Date: Sep 2001
Location: Davis, CA USA
Posts: 113
|
YY Cube Case botched hole cut
Hi all!
Well, I finally started to work on my cube by trying to cut the holes out for the windows using a jigsaw. Well, one hole turned out okay (it's not exactly straight, but it works). But while cutting the other hole, the jigsaw got away from me a little so I ended up cutting out a little chunk that I didn't intend to cut out. I put the moulding on to see if the rubber would cover up my mistake, but it didn't cover it all. Soooooo, that's where I need your help! Could JB weld be used to fill up some of the hole (like 1 - 2 mm)? Any other suggestions are greatly appreciated! I will post pics later. THANKS!!!! |
02-18-2002, 08:25 PM | #2 |
Cooling Savant
Join Date: Dec 2001
Location: Nebraska
Posts: 526
|
What size fan hole were you cutting...? You can always go a larger fan size.
__________________
========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 =========== |
02-18-2002, 08:32 PM | #3 |
Cooling Savant
Join Date: Sep 2001
Location: Davis, CA USA
Posts: 113
|
It's not a fan hole it's a window hole for the PCMods windows kit.
Sorry no pics yet, I can't find my camera. |
02-18-2002, 10:23 PM | #4 |
Cooling Savant
Join Date: Dec 2001
Location: Nebraska
Posts: 526
|
Did you cut the whole hole out yet? If not, you could possibly shift a side...
OR: Go buy some more plexi, use the plexi you have as a template and cut out a new/larger one to make up for your mistake.
__________________
========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 =========== |
02-19-2002, 01:00 AM | #5 |
Thermophile
Join Date: Oct 2001
Location: Nuu Zeeelin
Posts: 3,175
|
yeah, you could just cut out the entire side by another 2mm or 3mm or so, and see how that goes, or you could just put a fan where the hole is
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|