Go Back   Pro/Forums > ProCooling Geek Bits > Hardware and Case Mod's
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

Hardware and Case Mod's You Paint it, Cut it, Solder it, bend it, light it up, make it glow or anything like that, here is your forum.

Reply
Thread Tools
Unread 11-23-2005, 07:49 AM   #1
coolmiester
Cooling Neophyte
 
coolmiester's Avatar
 
Join Date: Feb 2004
Location: NE - UK
Posts: 29
Default A64 Bracket for Cascade AMD Block

I'm coming to the close on the Coolermaster comp case so it was time to spend a bit of time on something else so this ones for Leeums next project

Basically it was to make a bracket for Cathers Solid Silver AMD block so it can be used on an A64 939 socket board.

Anyway without further ado - it all started with some 4mm aluminium which still had its protective coating on but was covered in masking tape to make marking out a little easier as well as protect the surface.

Then simply measured and market out the shape and also all the holes.


Clamped it to the bench and cut it out using a jig-saw followed by centre punching the holes for fastening it to the block.


Now comes the fun bit

i got myself a new trepanning tool lately which is used in a normal drill and used for boring holes.....very handy for this type of thing!




BTW, these holes will merge into one as you will see and allow the barbs to stick through the bracket
So, keeping the drill totally flush with the surface and running medium/slow, this is how it works...




Once i was quite a way through i turned the bracket the other way up and using the centre hole as the pilot started boring from tuther side till it drops out.....very nice


Then again a bit further along the bracket to end up with this...




...and just to double check that it fits


The excess was taken out with the jig-saw to make the two holes into a larger oval shape which was then clamped to the bench again and filed smooth along with all the edges of the bracket.


A quick rub down with wet'n dry and it was ready for polishing.

I chopped the heads of a couple of nails and hammered them into the bench so they were below the level of the bracket to keep the thing from flying off and set away with the good ol polisher.


10 mins later and vuala


And here is how it looks fastened to the block and then a couple of it fastened to a 939 socket







Hope Leeum likes it!
__________________
Coolercases UK - Danger Den Official UK Distributer


paul@coolercases.co.uk
coolmiester is offline   Reply With Quote
Unread 11-23-2005, 08:29 AM   #2
csimon
Cooling Neophyte
 
Join Date: Apr 2005
Location: Acadiana
Posts: 99
Default

Hey that turned out really nice. Congrats!
csimon is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:17 PM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...