fan connector # for 3-pin male on mobo ?

BillA · 10-04-2004, 01:29 PM

anyone know a part/model # for the small 3-pin female connector that plugs into the mobo ?
(pump rpm sensing)
lost in Digi-Key

Incoherent · 10-04-2004, 01:50 PM

MTA 100/156
e.g.
unkeyed
AMP 640441-3 for AWG24,
AMP 640443-3 for AWG28
Page 97 in digikey

Edit: Probably not.

BillA · 10-04-2004, 01:54 PM

many Thanks

Incoherent · 10-04-2004, 02:01 PM

No worries.
I was just looking at them today, for flowmeter RPM sensing.

BillA · 10-04-2004, 02:57 PM

I'm thinking that the Newark # 38C9145 (Molex # 22-01-3037) has the configuration I see on the single lead RPM sensing connectors
http://www.molex.com/product/pcb/2695.pdf
??
hell to do things one knows nothing about

Incoherent · 10-04-2004, 03:41 PM

I think you are right actually Bill. My bad.

I have seen the AMP type as well but the Asus board I am looking at right now does have the Molex KK connector. Probably a safer bet.
22-01-2035 would fit this particular one. It has little feet which straddle the back plate.

10-04-2004, 01:29 PM	#1
BillA CoolingWorks Tech Guy Formerly "Unregistered" Join Date: Dec 2000 Location: Posts: 2,371.493,106 Posts: 4,440	fan connector # for 3-pin male on mobo ? anyone know a part/model # for the small 3-pin female connector that plugs into the mobo ? (pump rpm sensing) lost in Digi-Key

10-04-2004, 01:50 PM	#2
Incoherent Cooling Savant Join Date: Sep 2003 Location: Vallentuna, Sweden Posts: 410	MTA 100/156 e.g. unkeyed AMP 640441-3 for AWG24, AMP 640443-3 for AWG28 Page 97 in digikey Edit: Probably not. Last edited by Incoherent; 10-04-2004 at 03:45 PM.

10-04-2004, 01:54 PM	#3
BillA CoolingWorks Tech Guy Formerly "Unregistered" Join Date: Dec 2000 Location: Posts: 2,371.493,106 Posts: 4,440	many Thanks

10-04-2004, 02:01 PM	#4
Incoherent Cooling Savant Join Date: Sep 2003 Location: Vallentuna, Sweden Posts: 410	No worries. I was just looking at them today, for flowmeter RPM sensing.

10-04-2004, 02:57 PM	#5
BillA CoolingWorks Tech Guy Formerly "Unregistered" Join Date: Dec 2000 Location: Posts: 2,371.493,106 Posts: 4,440	I'm thinking that the Newark # 38C9145 (Molex # 22-01-3037) has the configuration I see on the single lead RPM sensing connectors http://www.molex.com/product/pcb/2695.pdf ?? hell to do things one knows nothing about

10-04-2004, 03:41 PM	#6
Incoherent Cooling Savant Join Date: Sep 2003 Location: Vallentuna, Sweden Posts: 410	I think you are right actually Bill. My bad. I have seen the AMP type as well but the Asus board I am looking at right now does have the Molex KK connector. Probably a safer bet. 22-01-2035 would fit this particular one. It has little feet which straddle the back plate.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)