Any high performance TECs for this psu

Acidwrz · 12-28-2002, 05:07 PM

I found an old power supply that came with the house in my workshop. The DC Fuse on it reads 32v @ 15a. I powered it up and found its voltage range is between 20 and 26vdc, when ever I change move the Volt Adjustment knob. I have no clue how many amps this thing can handle because my multimeter only goes up to 10. It arched and killed the fuse on my multimeter.

So any ideas to which pelt I should use, just imagine cooling as not a problem.

Danger-Darryn · 12-28-2002, 06:27 PM

Hehe, I'd love to see the way you tested the current draw on that thing

If you haven't got any loading slugs at 1/x ohm, I wouldn't try that again.

Acidwrz · 12-29-2002, 11:06 AM

Although it is old, it still comes with OVP and I had a 24v heating element on it for a load.

Since87 · 12-29-2002, 04:00 PM

Sounds like the "Drift 0.8" 172 Watt TEC would be the best choice with that supply.

12-28-2002, 05:07 PM	#1
Acidwrz Cooling Neophyte Join Date: Dec 2002 Location: Texas Posts: 4	Any high performance TECs for this psu I found an old power supply that came with the house in my workshop. The DC Fuse on it reads 32v @ 15a. I powered it up and found its voltage range is between 20 and 26vdc, when ever I change move the Volt Adjustment knob. I have no clue how many amps this thing can handle because my multimeter only goes up to 10. It arched and killed the fuse on my multimeter. So any ideas to which pelt I should use, just imagine cooling as not a problem.

12-28-2002, 06:27 PM	#2
Danger-Darryn Cooling Neophyte Join Date: Nov 2002 Location: Liverpool, UK Posts: 40	Hehe, I'd love to see the way you tested the current draw on that thing If you haven't got any loading slugs at 1/x ohm, I wouldn't try that again. __________________ P4 1.8a @ 2888MHz 1.85v CPU Load/Idle 55/36oC 256meg PC2100 (generic crap) 2.5-5-3-2 2.65v Abit BE7 RAID (R.I.P BD7-II) CPU:MEM 1:1 160MHz Cheapo Coolmaster HSF Full Atlantis system under construction

12-29-2002, 11:06 AM	#3
Acidwrz Cooling Neophyte Join Date: Dec 2002 Location: Texas Posts: 4	Although it is old, it still comes with OVP and I had a 24v heating element on it for a load.

12-29-2002, 04:00 PM	#4
Since87 Pro/Guru - Uber Mod Join Date: Sep 2002 Location: Indiana Posts: 834	Sounds like the "Drift 0.8" 172 Watt TEC would be the best choice with that supply.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)