Go Back   Pro/Forums > ProCooling Technical Discussions > General Liquid/Water Cooling Discussion
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums.

Reply
Thread Tools
Unread 01-18-2010, 02:09 AM   #1
smashed_99cbr
Cooling Neophyte
 
Join Date: Jan 2010
Location: Texas
Posts: 4
Default Temps seem high to me... q9550 on water...

Temps seem high to me... q9550 on water...
well my temps seem really high to me... getting 61C 61C 58C 58C according to real temp and core temp (at one point in time I had an x3210 (Intel 65nm Quad, Kentsfield G0) @ 3.2GHz @ 1.18V under load @ 45c 45c 42c 44c... nothing has changed other than the CPU and I didnt open the WC loop when i did this

room temp is around 20-22c

rig:

CPU q9550 E0 Lapped and polished @ 3.82GHz @ 450 x 8.5 @ 1.246v under LinX Load

Mobo: Gigabyte EP45-UD3P

Water Block: Original Danger Den TDX water block, Lapped and Polished and resently cleaned with a #1 nozzle

Pump: Danger Den D4

Radiator: 1977 Bonneville Heater core with custom fan shroud

fans: 2 Thermaltake A1280 120mm fans http://www.newegg.com/Product/Produc...82E16811999113

the fans are pulling thru the radi from outside the case

tubes: Primochill 1/2

route pump --> radi --> block --> t line --> pump

Heatsink goop: AS5
smashed_99cbr is offline   Reply With Quote
Unread 01-22-2010, 06:30 PM   #2
smashed_99cbr
Cooling Neophyte
 
Join Date: Jan 2010
Location: Texas
Posts: 4
Default Re: Temps seem high to me... q9550 on water...

no 1 huh?
smashed_99cbr is offline   Reply With Quote
Unread 01-23-2010, 03:05 AM   #3
billbartuska
Cooling Savant
 
Join Date: Jun 2005
Location: Skokie, Illinois
Posts: 322
Default Re: Temps seem high to me... q9550 on water...

Quote:
Originally Posted by smashed_99cbr View Post
no 1 huh?
LOL

This place is pretty dead now.

What's the delta t for the air in/out of the rad? What's the water temp? Dust in the rad fins?
A heater core is pretty lame on a fast quad core.
__________________
My new rig....
Intel SE440BX-3, PIII 550 (@ 680)
MX440 275/332 (@ 350/400) and 3DFX Voodo 5 5500 160/160 (@180/180)
Two Opticals and 120 gigs (w/28gigs in RAID0) on 4 Maxstors
billbartuska is offline   Reply With Quote
Unread 01-23-2010, 12:17 PM   #4
smashed_99cbr
Cooling Neophyte
 
Join Date: Jan 2010
Location: Texas
Posts: 4
Default Re: Temps seem high to me... q9550 on water...

Quote:
Originally Posted by billbartuska View Post
LOL

This place is pretty dead now.

What's the delta t for the air in/out of the rad? What's the water temp? Dust in the rad fins?
A heater core is pretty lame on a fast quad core.
air in is 21c air out is 23c

how do you check the water temps with a t line?

how do you figure its lame?

the way I have it setup it should get rid of 400watts with ease

http://martin.skinneelabs.com/Bonnie...re-Review.html

Last edited by smashed_99cbr; 01-23-2010 at 12:26 PM.
smashed_99cbr is offline   Reply With Quote
Unread 01-26-2010, 05:32 AM   #5
billbartuska
Cooling Savant
 
Join Date: Jun 2005
Location: Skokie, Illinois
Posts: 322
Default Re: Temps seem high to me... q9550 on water...

Quote:
Originally Posted by smashed_99cbr View Post
air in is 21c air out is 23c
how do you check the water temps with a t line?
the way I have it setup it should get rid of 400watts with ease
You need a temp sensor built in somewhere.

Thermaltake A1280 120mm Ball Bearing Case Fan
* Static Pressure: 2.97 mmH2O (max)

That's pretty low static pressure.

Skinnee's testing seems to indicate that you should be seeing a delta T much larger that 2°c for air in/out. If you can figure out a way to measure the water temp, you can see where you are on Skinee's chart and perhaps that will show where the problem is. If I had to guess, I'd think you'll find that your water temp is way high.

I don't remember which TDX insert is #1 (I used a TDX pure silver block/lapped for about a year long ago) but I'd try the most restrictive insert. That should be able to pull a little more heat out of the CPU.
Attached Images
File Type: jpg Heater Core Chart.jpg (59.8 KB, 1 views)
__________________
My new rig....
Intel SE440BX-3, PIII 550 (@ 680)
MX440 275/332 (@ 350/400) and 3DFX Voodo 5 5500 160/160 (@180/180)
Two Opticals and 120 gigs (w/28gigs in RAID0) on 4 Maxstors
billbartuska is offline   Reply With Quote
Unread 01-29-2010, 10:58 PM   #6
smashed_99cbr
Cooling Neophyte
 
Join Date: Jan 2010
Location: Texas
Posts: 4
Default Re: Temps seem high to me... q9550 on water...

well I switched over to the Enzotech Sapphire Rev A... wow that thing is heavy... I am very happy with the results...

dropped 5c and the AS5 has not even cured yet... lol
smashed_99cbr is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:06 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...