|
|
Xtreme Cooling LN2, Dry Ice, Peltiers, etc... All the usual suspects |
Thread Tools |
07-15-2003, 11:33 PM | #1 |
Cooling Savant
Join Date: Jan 2003
Location: Colorado
Posts: 176
|
Pelt w/ Antec True 550W
If I have my system on this PS and want to add a pelt is a 120W one about the most I can get out of it?
|
07-15-2003, 11:47 PM | #2 |
Responsible for 2%
of all the posts here. Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
|
?!?
Get the most out of what? If you're pelting the CPU, you ought to be looking at 170W pelts and higher, unless it's an older CPU. Then you need to figure out if the PSU can power that pelt, and that depends on the voltage you're going to end up applying to it. |
07-16-2003, 10:25 AM | #3 |
Cooling Savant
Join Date: Jan 2003
Location: Colorado
Posts: 176
|
What's the most wattage I can get out of my PS (for a pelt) w/ out pushing my PS too much... Basically I don't want to buy another PS and I'm wondering what's the biggest pelt I can use w/ my current PS. It has 24A max load on the 12V side.
I have a 1.4ghz tbird (gunna need a big pelt for that mahma-jahma), but I don't plan on keeping it for longer then another year (hopefully not that long). |
07-16-2003, 10:39 AM | #4 |
Responsible for 2%
of all the posts here. Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
|
So you found a pelt that's spec'ed at 15 volts, and at least 170 Watts?
|
07-16-2003, 10:43 PM | #5 |
Cooling Savant
Join Date: Jan 2003
Location: Colorado
Posts: 176
|
169W Potted Peltier
Imax = 16.1 Amps Qmax = 169 Watts Vmax = 16.4 Volts Delta Tmax = 69 (C) Size = 50mm X 50mm X 3.4mm You don't think this one will work? Is it ok to also use my 5V line? It has 40A Max Load. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|