Temps with this setup

David|SP · 01-31-2003, 10:59 AM

i´m going to get a peltier for this, but not sure about 226W or 169W

p4 2.4B C1 stepping
gigabyte 8inxp (granite bay)
innovatek watercooling with: eheim 1048 pump, innovacool rev.3 block, 120x120 innovatek radiator, and 2x 120mm fans on it

i´m looking for good temps, not below zero or anything, something "normal"

thanks all

kio_liex · 06-24-2003, 04:26 AM

I think you can get them, if you lucky...

t00lb0x · 06-24-2003, 05:54 PM

A) Make sure the block works with a tec (some are not made for tecs)
B) TECS can get CPU temps, from motherboard, of 9C. Which is good, the coldplate can get to -15 and below.

01-31-2003, 10:59 AM	#1
David\|SP Cooling Neophyte Join Date: Jan 2003 Location: MU - Spain Posts: 4	Temps with this setup i´m going to get a peltier for this, but not sure about 226W or 169W p4 2.4B C1 stepping gigabyte 8inxp (granite bay) innovatek watercooling with: eheim 1048 pump, innovacool rev.3 block, 120x120 innovatek radiator, and 2x 120mm fans on it i´m looking for good temps, not below zero or anything, something "normal" thanks all __________________ Intel P4 1.8a FSB400 Asus P4PE - 512MB DDR333 Innovatek Watercooling Creative GF4 Ti4200 64MB Everything else is crap Proud member of the [xLr8] CS clan

06-24-2003, 04:26 AM	#2
kio_liex Cooling Neophyte Join Date: Jun 2003 Location: Denmark - Odense Posts: 10	I think you can get them, if you lucky... __________________ ------------------------------- Kio Liex 2.2 P4 @ 2.7 (box cooler, soon watercooled)

06-24-2003, 05:54 PM	#3
t00lb0x Cooling Savant Join Date: May 2003 Location: In a box Posts: 221	A) Make sure the block works with a tec (some are not made for tecs) B) TECS can get CPU temps, from motherboard, of 9C. Which is good, the coldplate can get to -15 and below. __________________ "If you can't dazzle them with brilliance, baffle them with bullshit"

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)