Go Back   Pro/Forums > ProCooling Technical Discussions > General Liquid/Water Cooling Discussion
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums.

Reply
Thread Tools
Unread 04-19-2005, 10:59 AM   #226
Marci
Cooling Savant
 
Marci's Avatar
 
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
Default

Quote:
maybe, once this is a shipping product, it might make sense to also provide a stick-on template with screw holes and rectangular opening already cut out. That'd let semi-new'bs figure out where to mount the rad, and, after drilling just one or two holes, be able to test-mount the rad/shroud/fan inside the case - and if they'd figured wrong, they'd just have a screw hole or two in the wrong place(es) rather than a big rectangular hole. Shouldn't add to cost of goods much.
Doubt I could stirr up the enthusiasm required to produce a stickybacked template... or the budget at the moment... however, will defintitely do the usual PDF download-&-print-fer-yerselves template as I did with the HE series... then if folks really want it sticky backed they can just go buy some sticky paper for their printer.

I like to force folks to do SOME of the work themselves Encourages them to do their research properly... and also makes em learn from their mistakes... s'how it was when I had to learn about all this stuff
Marci is offline   Reply With Quote
Unread 04-19-2005, 01:16 PM   #227
bobkoure
Cooling Savant
 
Join Date: Feb 2003
Location: USA - Boston area
Posts: 798
Default

Quote:
Originally Posted by Marci
I like to force folks to do SOME of the work themselves Encourages them to do their research properly... and also makes em learn from their mistakes... s'how it was when I had to learn about all this stuff
There's certainly that side of it - but every new water-cooler who tells his buddies that "it was dead easy" increases the number of potential purchasers. As a hobbyist, I'm perfectly glad to leave things exclusive - but I'm not sure that's the right direction for water cooling as a whole.
On the other hand, make something too big a market and suddenly it's being made in China and sold at Walmart. Pretty sure I don't want that either - so maybe you're more right than I know
bobkoure is offline   Reply With Quote
Unread 04-19-2005, 02:50 PM   #228
Delirious
Cooling Savant
 
Delirious's Avatar
 
Join Date: Oct 2004
Location: Twilight Zone
Posts: 152
Default

Quote:
Originally Posted by bobkoure
There's certainly that side of it - but every new water-cooler who tells his buddies that "it was dead easy" increases the number of potential purchasers. As a hobbyist, I'm perfectly glad to leave things exclusive - but I'm not sure that's the right direction for water cooling as a whole.
On the other hand, make something too big a market and suddenly it's being made in China and sold at Walmart. Pretty sure I don't want that either - so maybe you're more right than I know

well they sell dangerden stuff at newegg now, so i dont think wal-mart is far off
Delirious is offline   Reply With Quote
Unread 04-27-2005, 07:11 AM   #229
Marci
Cooling Savant
 
Marci's Avatar
 
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
Default

PA160s should be available to retail in the UK tomorrow evening... First one thru the door will be getting shipped straight to Cathar... apols for lack of updates, everything has gone a tad chaotic this end and am working flat out to make a hole to catch up on stuff I said I'd do but so far haven't!
Marci is offline   Reply With Quote
Unread 04-27-2005, 12:50 PM   #230
JSimmons
Cooling Savant
 
JSimmons's Avatar
 
Join Date: Apr 2003
Location: 4-sided room with an exit going east, and an exit going south
Posts: 392
Default

What is a PA160?
__________________
My Watercooling Stuff
JSimmons is offline   Reply With Quote
Unread 04-27-2005, 05:18 PM   #231
Delirious
Cooling Savant
 
Delirious's Avatar
 
Join Date: Oct 2004
Location: Twilight Zone
Posts: 152
Default

Quote:
Originally Posted by Marci
PA160s should be available to retail in the UK tomorrow evening... First one thru the door will be getting shipped straight to Cathar... apols for lack of updates, everything has gone a tad chaotic this end and am working flat out to make a hole to catch up on stuff I said I'd do but so far haven't!

Will u be makeing a dual 120 version?
Delirious is offline   Reply With Quote
Unread 04-28-2005, 02:27 AM   #232
Risky
Cooling Neophyte
 
Join Date: Aug 2002
Location: London
Posts: 96
Default

Good work.

Do you have a retail price for it yet?
Risky is offline   Reply With Quote
Unread 04-28-2005, 04:00 AM   #233
Marci
Cooling Savant
 
Marci's Avatar
 
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
Default

Quote:
What is a PA160?
Go read the thread.

Quote:
Will u be makeing a dual 120 version?
Nope

Quote:
Do you have a retail price for it yet?
Later today...
Marci is offline   Reply With Quote
Unread 04-28-2005, 09:11 AM   #234
Marci
Cooling Savant
 
Marci's Avatar
 
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
Default

PA160 Now online and available to purchase.... see www.thermochill.com

Retailing at £54.05 inc VAT in the UK. Whatever that works out to elsewhere is solely dependant on the exchange rate at the moment. Pricedrop has also been put into effect on the HE120.x series rads across the board. 40mm Shrouds for HE series have also been launched to retail today.

Currently only O-CuK have stocks. Other ThermoChill resellers should be receiving stocks within the next week or so. International Distributors may have a slightly longer delay.
Marci is offline   Reply With Quote
Unread 04-28-2005, 09:35 AM   #235
mcmad
Cooling Neophyte
 
Join Date: Apr 2003
Location: UK
Posts: 8
Default

nice one Marci..

order is in
mcmad is offline   Reply With Quote
Unread 04-28-2005, 11:10 AM   #236
Marci
Cooling Savant
 
Marci's Avatar
 
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
Default

Quote:
however, will defintitely do the usual PDF download-&-print-fer-yerselves template as I did with the HE series...
http://www.thermochill.com/guides/pa160template.pdf
Marci is offline   Reply With Quote
Unread 04-28-2005, 11:49 AM   #237
Razor6
Cooling Savant
 
Razor6's Avatar
 
Join Date: Apr 2002
Location: Houston, TX
Posts: 192
Default

It seems like the price should fall between the 120.1 and the 120.2, like $95 here in the US. Still pretty expensive compared to HWlabs products though. $65 would probably be a competitive price against them if they had a similar product and priced it between the BIP and BIP2.
Razor6 is offline   Reply With Quote
Unread 04-28-2005, 12:28 PM   #238
Ruiner
Cooling Savant
 
Join Date: May 2003
Location: New Smyrna, FL
Posts: 258
Default

The exchange rate will not help US sales.
Ruiner is offline   Reply With Quote
Unread 05-24-2005, 09:50 AM   #239
[-Stash-]
Cooling Neophyte
 
[-Stash-]'s Avatar
 
Join Date: Jun 2003
Location: Kent, England
Posts: 24
Default

Quote:
Originally Posted by Marci
PA160 Now online and available to purchase.... see www.thermochill.com

Retailing at £54.05 inc VAT in the UK. Whatever that works out to elsewhere is solely dependant on the exchange rate at the moment. Pricedrop has also been put into effect on the HE120.x series rads across the board. 40mm Shrouds for HE series have also been launched to retail today.

Currently only O-CuK have stocks. Other ThermoChill resellers should be receiving stocks within the next week or so. International Distributors may have a slightly longer delay.
I don't suppose you had any luck with sourcing any of that 3/8"ID tubing that Cathar mentioned did you? Or is the 3/8" Tygon as close as we're going to get to it?
__________________
[-Stash-]
----------------------------------
XP-M 2500+ (2.5GHz @200FSB), DFI Infinity NFII Ultra
2*512 Ballistix 3200, 6800GT 410/1100
WD740GD, 2*120 SATA Maxtor 6Y120M0, NEC ND2500A (external)
Eheim 1250, DD Maze3, Heater Core, 1/2" Tygon
[-Stash-] is offline   Reply With Quote
Unread 05-24-2005, 09:59 AM   #240
Marci
Cooling Savant
 
Marci's Avatar
 
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
Default

Nothing as of yet...
Marci is offline   Reply With Quote
Unread 05-24-2005, 10:44 AM   #241
[-Stash-]
Cooling Neophyte
 
[-Stash-]'s Avatar
 
Join Date: Jun 2003
Location: Kent, England
Posts: 24
Default

Has anyone actually bought one of these yet? I'm going to be revamping my watercooling loop soon with an A64 and was wondering if one of these silent rads would be sufficient for an OC'd A64, 6800GT and NF4 chipset. I'd love to see some pictures of full systems using this rad just for ideas of fitting it.

Thanks to both Marci and Cathar for all the hard work on this one.
__________________
[-Stash-]
----------------------------------
XP-M 2500+ (2.5GHz @200FSB), DFI Infinity NFII Ultra
2*512 Ballistix 3200, 6800GT 410/1100
WD740GD, 2*120 SATA Maxtor 6Y120M0, NEC ND2500A (external)
Eheim 1250, DD Maze3, Heater Core, 1/2" Tygon
[-Stash-] is offline   Reply With Quote
Unread 05-24-2005, 10:45 AM   #242
Marci
Cooling Savant
 
Marci's Avatar
 
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
Default

Sold plenty of em here... no pix have been sent in tho
Marci is offline   Reply With Quote
Unread 05-24-2005, 02:39 PM   #243
mcmad
Cooling Neophyte
 
Join Date: Apr 2003
Location: UK
Posts: 8
Default

http://www.mawhyte.pwp.blueyonder.co...oject/side.JPG

http://www.mawhyte.pwp.blueyonder.co...ject/side3.JPG

couple there..
mcmad is offline   Reply With Quote
Unread 05-25-2005, 03:31 AM   #244
[-Stash-]
Cooling Neophyte
 
[-Stash-]'s Avatar
 
Join Date: Jun 2003
Location: Kent, England
Posts: 24
Default

Thanks for that mcmad. What case is that btw?
__________________
[-Stash-]
----------------------------------
XP-M 2500+ (2.5GHz @200FSB), DFI Infinity NFII Ultra
2*512 Ballistix 3200, 6800GT 410/1100
WD740GD, 2*120 SATA Maxtor 6Y120M0, NEC ND2500A (external)
Eheim 1250, DD Maze3, Heater Core, 1/2" Tygon
[-Stash-] is offline   Reply With Quote
Unread 05-25-2005, 04:40 AM   #245
mcmad
Cooling Neophyte
 
Join Date: Apr 2003
Location: UK
Posts: 8
Default

Quote:
Originally Posted by [-Stash-]
Thanks for that mcmad. What case is that btw?
Lian Li PC-6077, has 5 1/4 bays all the way down the front so I had to cut a little & install with fan pushing through rad, a normal LL case should be fine without cuts though & let you install rad either way round.

couple more here..

http://www.mawhyte.pwp.blueyonder.co...ject/front.JPG

http://www.mawhyte.pwp.blueyonder.co...ect/front2.JPG
mcmad is offline   Reply With Quote
Unread 05-25-2005, 06:20 AM   #246
Marci
Cooling Savant
 
Marci's Avatar
 
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
Default

We've made a minor modification to the manufacturing process to make the rads slightly easier to mount... on the side opposite to the barbs (where mcmad currently has his shroud) we've added 4x tapped fixing points into the lips of the sidewalls, so that the rad can be attached direct to the case with the shroud on the opposing (side with the barbs on) face. This allows the full core area to be mounted flat against the front of the case (with a simple rectangular opening needed) with shroud on the inside so that cold air can be pulled in thru the front of the case, thru the core, thru the shroud....

Once the first modified batch turns up I'll do a photoshoot of fitting the rad in any LianLi PC6x case, and any other cases I happen to lay my hands on.
Marci is offline   Reply With Quote
Unread 05-25-2005, 08:47 AM   #247
[-Stash-]
Cooling Neophyte
 
[-Stash-]'s Avatar
 
Join Date: Jun 2003
Location: Kent, England
Posts: 24
Default

Nice one Marci

If one of those cases happens to be a Lian Li V1100 I'd be most interested if the PA160 would fit in;

1) the front in place of the HDD Racks
2) along the bottom, again in place of the HDD Racks, mounted side on so you could perhaps fit two PA160s.
__________________
[-Stash-]
----------------------------------
XP-M 2500+ (2.5GHz @200FSB), DFI Infinity NFII Ultra
2*512 Ballistix 3200, 6800GT 410/1100
WD740GD, 2*120 SATA Maxtor 6Y120M0, NEC ND2500A (external)
Eheim 1250, DD Maze3, Heater Core, 1/2" Tygon
[-Stash-] is offline   Reply With Quote
Unread 05-25-2005, 08:52 AM   #248
Marci
Cooling Savant
 
Marci's Avatar
 
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
Default

Along the bottom, literally, would work. IE: Cut 160x160 hole in base of case, mount radiator flat against hole. Shroud on top of radiator, with fan pulling air in thru the base... the wheels of the V series give it enough standoff to allow sufficient airflow.
Marci is offline   Reply With Quote
Unread 05-25-2005, 09:38 AM   #249
bobkoure
Cooling Savant
 
Join Date: Feb 2003
Location: USA - Boston area
Posts: 798
Default

Quote:
Originally Posted by Marci
We've made a minor modification to the manufacturing process to make the rads slightly easier to mount... on the side opposite to the barbs (where mcmad currently has his shroud) we've added 4x tapped fixing points into the lips of the sidewalls,
Sounds ideal.
I'm personally a bit bling-averse, but have you thought of matching grills? Hoiles in the grills match up with the tapped holes in the rad, maybe include spacers and/or "roll" the grill edges a bit to stand the grill off from the rad - center part is whatever bling you think might sell (wonder if there's a way to make it look like an old MG rad - probably would only appeal to old fogies, so maybe not such a great idea...)
bobkoure is offline   Reply With Quote
Unread 05-25-2005, 10:23 AM   #250
Marci
Cooling Savant
 
Marci's Avatar
 
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
Default

Working on lasercut grills etc for all series at the mo...
Marci is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:29 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...