Go Back   Pro/Forums > ProCooling Geek Bits > Mod / System Gallery
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

Mod / System Gallery You got your machine all Spiffy'd up? Got the Chrome and the Fuzzy Dice? Show em off! (Free Image Hosting)

Reply
Thread Tools
Unread 05-05-2008, 09:05 AM   #1
=ACID RAIN=
Cooling Neophyte
 
Join Date: May 2008
Location: Kingwood, TX
Posts: 6
Default LAN case upgrade :)

Time to get rid of ol' reliable. I need something LAN-worthy, and a 26in tall steel case isn't gonna do it. So the plan was to get this:


into this:


Here's the case:


Fitting the heatercore with the power supply. Damn close fit! I measured before I bought and got this case specifically because it would fit my stuff in this manner.


I have a little trick up my sleeve that gets me 100% surface area usage without a shroud


The block is...BLEEDING! Nope, it's a household acidic solution - ketchup! Cleans copper perfectly, as you can see from the fuzion block on the left, which was black and looking pretty rough beforehand.


Here is a picture of my 8800GT. Believe it or not the ram STILL gets warm. No wonder the ram on these cards fails if overclocked.


And the desk...poor desk. It went from this:


to THIS:


This is the finalized gasket install. Notice the ziptie? I used zipties under the rad to bridge the gap and hold it up, then 2 straps above to pull it down tight. What you end up with is a suspension that doesn't move AT ALL. Yes I could have drilled holes across the case, screwed in dowel rods, or any other oddball way of mounting this, but I chose this way because it required no modification to the inside of the case. Even the pump is taped down with double-sided tape, which works perfectly.


Here is a shot of the clearance between the top and the rad. It's less than 1cm. I would have liked it a bit lower so there was more clearance, but this is good because it keeps the foam gasket nice and tight.


Here is a picture of the finalized system. I would like to clean up the wires a little more, but for now I am just glad to have my computer back in one piece haha. Tweaking, for me, comes with time


Shot from the front, with rheostats for the fans. It’s still restrictive at this point, and the CPU gets pretty warm.


Here we go, good temporary fix for my airflow woes.


They are front panels off of my wife's coolermaster case haha. I glanced at her case, said "DAMN!" and started digging around in my parts drawers until I found them LOL.

This allows not only airflow at the bottom-front, but a little in the 3.5 and plenty in the 5.25 bays. This alone dropped my temp 4 degrees C. Now I am finally back to where I was before, with idle temps around 33C on the hottest core.

I swear they look better than the flash shows them to be.

Now I just need to find another 3.5 to match the other one and I might just make this permanent . Gotta figure out a way to make them sturdy too, since they are just barely staying on the bezel (self-clipping)
__________________
Gamer: Q6600 G0 3.6 1.4v . Abit IP35 Pro . 2GB Ballistix 800 . eVGA 8800GT . 560w SS Zeus . 320GB SATA . 36GB 10k SATA
Wife's: E6300 . Asus P5B . 2GB G.Skill 800 . eVGA 7900GT . 500w OCZ . 2 x 120GB PATA
File Server: E6600@3GHz . GA-G31M-S2L . 1GB Adata 800 . 500w . 4x400GB RAID5 on S150 SX4 . 120GB SATA

MY HEAT
=ACID RAIN= is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 09:15 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...