Pelt cooling your Northbridge. - Page 3

SparkedFire · 05-23-2003, 06:43 AM

When i get everything set up i will post some of the results. It will take time since i need to get a pelt and waterblock in, not to mention my actual watercooling sys!

** Sorry guys i seem to have a little problim using the PM **

If you dont have a clue as to what i am talking about, well it doesn't matter. Ignore this.

SparkedFire · 05-26-2003, 09:47 PM

Hey, been awhile. I got everything for my Watercooling setup except the Northbridge waterblock. Here are the specs:

*DD Maze 3-1 waterblock
*Swiftech Pump and Fill & Bleed assembly
*Black Ice Xtreme 2

I should have a pelt for the Northbridge soon, and a Northbridge waterblock. The results of my exparament will eventually be out after I get the NB block.

Then I will try with a 226w pelt on the CPU and the pelt on the NB to see what i can get.

Balinju · 05-27-2003, 07:46 AM

you're aming high man

what material are you going to use to prevent condensation?

SparkedFire · 05-30-2003, 02:33 PM

Have not looked into condensation prevention, but i will. Trust me. If you have noticed i damaged my rad

. I am looking for Help on its repair.

jaydee · 05-30-2003, 02:57 PM

Quote:

Originally posted by SparkedFire
Have not looked into condensation prevention, but i will. Trust me. If you have noticed i damaged my rad . I am looking for Help on its repair.

Probably going to need a much bigger rad, or two rads anyway with those pelts.

SparkedFire · 05-30-2003, 03:18 PM

Huh? I will only be using one 226w and one 36w pelt. I think i will be in the clear here. about 160CFM passes through the Black ICE X 2 with my current fans on it. Its one big rad, anyways what kind of rad were you thinking. I mean be better?

jaydee · 05-30-2003, 04:29 PM

Quote:

Originally posted by SparkedFire
Huh? I will only be using one 226w and one 36w pelt. I think i will be in the clear here. about 160CFM passes through the Black ICE X 2 with my current fans on it. Its one big rad, anyways what kind of rad were you thinking. I mean be better?

Well your going to have over 262+watts just in pelts (providing you use the right power supply). Your water temp is going to be rather toasty. Cooler you keep the hot side of the pelt, the cooler the cold side is. I would say at least 2 of those rads. But thats just my opinion. You should try and rattle RoboTech for some better asnwers.

SparkedFire · 06-07-2003, 10:46 PM

Hey qwerty57, no pics? anyways trying to get my sys running. No time

. There is a leak near the pump i will work on soon. soon. what about now?

oh, sorry. anyways will a 30% to 70% mix of anti-freeze to water work? Will it also prevent algae build-up?

SparkedFire · 06-19-2003, 01:04 PM

another update here. My system is up and running at the present time. I have yet to get a DD Z chipset block. When i do i will be back here, to talk about the experiment with the pelt.

qwerty57 · 06-19-2003, 01:38 PM

here Its a 80w 40x40 tec sandwitched inbetween two 2x2x.22in peices of copper then I add the d-tec block on top.. I have now a 240mhz fsb dc at 4,2,2,2 and one of the fastest dc amd fsb's for 3d that Ive ever seen ever.

SparkedFire · 06-19-2003, 02:00 PM

humm, anyways my comp just croked out on me. trying to figure out the problim now.

Balinju · 06-19-2003, 02:44 PM

240Mhz fsb from 133mhz???

that's

NetDaemon · 07-13-2003, 03:30 AM

We cant use an swiftech MCW50-T or something like that for cooling the nb?

Boli · 07-13-2003, 05:50 AM

Quote:

Originally qwerty57
can roast an egg with the stock cooling

Quote:

Originally posted by Balinju
lol

That is no joke... my northbridge is HOT, and I even put on a heatsink on my southbridge to help with the heat there... though not as hot as my Ram heat spreaders where I burnt my finger... ouch!

05-23-2003, 06:43 AM	#51
SparkedFire Cooling Savant Join Date: Apr 2003 Location: The Matrix Posts: 114	When i get everything set up i will post some of the results. It will take time since i need to get a pelt and waterblock in, not to mention my actual watercooling sys! Sorry guys i seem to have a little problim using the PM If you dont have a clue as to what i am talking about, well it doesn't matter. Ignore this. __________________ If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it.

05-26-2003, 09:47 PM	#52
SparkedFire Cooling Savant Join Date: Apr 2003 Location: The Matrix Posts: 114	Hey, been awhile. I got everything for my Watercooling setup except the Northbridge waterblock. Here are the specs: DD Maze 3-1 waterblock Swiftech Pump and Fill & Bleed assembly *Black Ice Xtreme 2 I should have a pelt for the Northbridge soon, and a Northbridge waterblock. The results of my exparament will eventually be out after I get the NB block. Then I will try with a 226w pelt on the CPU and the pelt on the NB to see what i can get. __________________ If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it.

05-27-2003, 07:46 AM	#53
Balinju Cooling Savant Join Date: Dec 2002 Location: Malta Posts: 495	you're aming high man what material are you going to use to prevent condensation? __________________ So the bullet proof vest aint a $hit when d laser is pointed to your head Kid

05-30-2003, 02:33 PM	#54
SparkedFire Cooling Savant Join Date: Apr 2003 Location: The Matrix Posts: 114	Have not looked into condensation prevention, but i will. Trust me. If you have noticed i damaged my rad . I am looking for Help on its repair. __________________ If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it.

05-30-2003, 03:18 PM	#56
SparkedFire Cooling Savant Join Date: Apr 2003 Location: The Matrix Posts: 114	Huh? I will only be using one 226w and one 36w pelt. I think i will be in the clear here. about 160CFM passes through the Black ICE X 2 with my current fans on it. Its one big rad, anyways what kind of rad were you thinking. I mean be better? __________________ If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it.

06-07-2003, 10:46 PM	#58
SparkedFire Cooling Savant Join Date: Apr 2003 Location: The Matrix Posts: 114	Hey qwerty57, no pics? anyways trying to get my sys running. No time . There is a leak near the pump i will work on soon. soon. what about now? oh, sorry. anyways will a 30% to 70% mix of anti-freeze to water work? Will it also prevent algae build-up? __________________ If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it.

06-19-2003, 01:04 PM	#59
SparkedFire Cooling Savant Join Date: Apr 2003 Location: The Matrix Posts: 114	another update here. My system is up and running at the present time. I have yet to get a DD Z chipset block. When i do i will be back here, to talk about the experiment with the pelt. __________________ If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it.

06-19-2003, 01:38 PM	#60
qwerty57 Cooling Neophyte Join Date: Apr 2003 Location: hollywood, fl Posts: 40	here Its a 80w 40x40 tec sandwitched inbetween two 2x2x.22in peices of copper then I add the d-tec block on top.. I have now a 240mhz fsb dc at 4,2,2,2 and one of the fastest dc amd fsb's for 3d that Ive ever seen ever.

06-19-2003, 02:00 PM	#61
SparkedFire Cooling Savant Join Date: Apr 2003 Location: The Matrix Posts: 114	humm, anyways my comp just croked out on me. trying to figure out the problim now. __________________ If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it.

06-19-2003, 02:44 PM	#62
Balinju Cooling Savant Join Date: Dec 2002 Location: Malta Posts: 495	240Mhz fsb from 133mhz??? that's __________________ So the bullet proof vest aint a $hit when d laser is pointed to your head Kid

07-13-2003, 03:30 AM	#63
NetDaemon Cooling Neophyte Join Date: Mar 2003 Location: Glasgow, UK Posts: 1	We cant use an swiftech MCW50-T or something like that for cooling the nb? __________________ CPU : Athlon 1800+ Mobo : Epox 8rda+ Case : Addtronics 7896 Ram : 256 mb Twinmos 2100 CAS2 HDDs : Western Digital 40gb ATA100 and Fujitsu 13gb ATA33 (Linux) DVD : Pionneer 106S CDR : Plexwriter 16/10/40 Graphics : Geforce 2 GTS Cooling : Maze3-1, 2 Evercool 120mm @ BIX, 1048

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)