Pump

stealth17 · 10-10-2004, 06:06 PM

Need some help on which pump to use. What I am doing is cooling my rig with a heater core in my attic which is 8 ft above my system. The attic will be super cold since it will be winter time when i do this.

Should I use like the mag 3? I need something that is around $50 and does not add alot of heat, leak, or suck.

Thanks

bigben2k · 10-11-2004, 03:51 PM

Mag3 will be fine. Just remember Joe's article here; seal the housing.

killernoodle · 10-11-2004, 04:56 PM

Seal it. Good advise. Otherwise, it is a terrific pump. I have had no issues with it. Pumps very powerfully and is nice and quiet. I wonder why they dont put a softer o-ring in there in the first place? Seems like that would solve most of the mag 3s problems...

10-10-2004, 06:06 PM	#1
stealth17 Cooling Neophyte Join Date: Oct 2004 Location: USA Posts: 13	Pump Need some help on which pump to use. What I am doing is cooling my rig with a heater core in my attic which is 8 ft above my system. The attic will be super cold since it will be winter time when i do this. Should I use like the mag 3? I need something that is around $50 and does not add alot of heat, leak, or suck. Thanks __________________ TheOverclocked.com

10-11-2004, 03:51 PM	#2
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Mag3 will be fine. Just remember Joe's article here; seal the housing. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

10-11-2004, 04:56 PM	#3
killernoodle Thermophile Join Date: Sep 2002 Location: Charlotte, NC Posts: 1,014	Seal it. Good advise. Otherwise, it is a terrific pump. I have had no issues with it. Pumps very powerfully and is nice and quiet. I wonder why they dont put a softer o-ring in there in the first place? Seems like that would solve most of the mag 3s problems... __________________ I have a nice computer.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)