|
|
Random Nonsense / Geek Stuff All those random tech ramblings you can't fit anywhere else! |
Thread Tools |
06-21-2002, 03:03 PM | #1 |
Cooling Savant
Join Date: Jun 2002
Location: San Diego, CA
Posts: 150
|
PCI/AGP Speeds???
OK...I'm wondering, first of all, if there is a program that can accurately read current PCI and AGP bus rates. I've currently got my XP1600+ @ 1754MHz (166x10.5). I'm wanting to see if I can go higher on the FSB (without unlocking the CPU - that's coming later ), and I'm a little concerned about these bus speeds. Right now, Fuzzy Logic 3 says that my PCI is @ 41MHz, and the AGP is at 83MHz. Basically I want a second opinion. It seems that @ 166MHz FSB, there should be some type of divisor to cut these back down to normal speeds. Maybe it's just not supported by my BIOS/mobo, but that's part of what I'm investigating. All of the specs are in the sig.
__________________
"I believe that the moment is near when by a procedure of active paranoiac thought, it will be possible to systematize confusion to the total discrediting of the world of reality" -Salvador Dali AMD XP1600+ @1790MHz and rethinking my cooling.... MAZE3 --> DD Cooler Cube --> Eheim 1048 512MB PC2700 DDR MSI KT3 Ultra-ARU 2x 20GB Maxtor in RAID 0 1x 30GB Maxtor --> WinXP GF3 Ti200 @ 240/499 |
06-21-2002, 03:20 PM | #2 |
Cooling Savant
Join Date: Aug 2001
Location: SLO, CA
Posts: 837
|
Your reading the PCI/AGP speeds correctly.
To my knowledge, the only MB that supports a 1/5 divisor is the Epox boards. Other than those (or another MB that does that) you are stuck with very high AGP/PCI speeds. HOw did you get your GF3 to accept such a high AGP speed? Mine starts craping out after 150bus. BIOS tweaks?
__________________
Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10) OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings) DFI LANParty nForce4 Ultra-D SCSI Raid 5 x (3) Cheetah 15K HDDs LSI Express 500 (128MB cache) OCZ PowerStream 520W PSU ATI X850XT PE (Stock) DTEK WhiteWater + DTEK Custom Radiator Eheim 1250 |
06-21-2002, 06:29 PM | #3 |
Thermophile
Join Date: Oct 2001
Location: Nuu Zeeelin
Posts: 3,175
|
Abit's kt333 boards have it to, so do several other kt333 boards. I don't know about the msi - I try to keep away from them
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water |
06-22-2002, 03:31 PM | #4 | |
Cooling Savant
Join Date: Jun 2002
Location: San Diego, CA
Posts: 150
|
Quote:
__________________
"I believe that the moment is near when by a procedure of active paranoiac thought, it will be possible to systematize confusion to the total discrediting of the world of reality" -Salvador Dali AMD XP1600+ @1790MHz and rethinking my cooling.... MAZE3 --> DD Cooler Cube --> Eheim 1048 512MB PC2700 DDR MSI KT3 Ultra-ARU 2x 20GB Maxtor in RAID 0 1x 30GB Maxtor --> WinXP GF3 Ti200 @ 240/499 |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|