Snap 4100 problems :(

Joe2003 · 02-27-2009, 01:03 PM

Hi

I have aquired a quantum m4100 and dont know the log details for it. I have found the rest button at the front. I hold it down on boot, wait for the lights to flash, then click it twice then hold and it resets but this doesnt appear to change the password back to its default?

I have tried:-

u: administrator
p:

u: administrator
p: administrator

u: admin
p:

u: admin
p: admin

and all uppercase versions of these. Any pointers?

thanks for the help!

Joe

blue68f100 · 02-27-2009, 06:35 PM

Is both system and disk led's blinking in unison before the reset cmd is sent. Is the unit responding with 2 blinks?

before you tell it to reboot by holding the reset button down.

administrator
pw= <blank>

Joe2003 · 02-28-2009, 08:32 AM

yep, it is definatly responding with 2 binks. If I leave it it just sits there binking at me (depending on the number of times I click the reset buttton). Then I hold it down and it resets but still cant login. what is the default username and password on them?

thanks for the help!

blue68f100 · 03-01-2009, 07:50 AM

The def that I recall, which has been may years now.
userid: administrator
password: <blank, no password>

May have to look it up in the user guide.

Joe2003 · 03-01-2009, 12:49 PM

ok i was being a retard. I was arpscaning to finds its address and was connecting to my router rather than the server. Can now get on it fine thanks!

02-27-2009, 01:03 PM	#1
Joe2003 Cooling Neophyte Join Date: Feb 2009 Location: home Posts: 3	Snap 4100 problems :( Hi I have aquired a quantum m4100 and dont know the log details for it. I have found the rest button at the front. I hold it down on boot, wait for the lights to flash, then click it twice then hold and it resets but this doesnt appear to change the password back to its default? I have tried:- u: administrator p: u: administrator p: administrator u: admin p: u: admin p: admin and all uppercase versions of these. Any pointers? thanks for the help! Joe

02-27-2009, 06:35 PM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 4100 problems :( Is both system and disk led's blinking in unison before the reset cmd is sent. Is the unit responding with 2 blinks? before you tell it to reboot by holding the reset button down. administrator pw= <blank> __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

02-28-2009, 08:32 AM	#3
Joe2003 Cooling Neophyte Join Date: Feb 2009 Location: home Posts: 3	Re: Snap 4100 problems :( yep, it is definatly responding with 2 binks. If I leave it it just sits there binking at me (depending on the number of times I click the reset buttton). Then I hold it down and it resets but still cant login. what is the default username and password on them? thanks for the help!

03-01-2009, 07:50 AM	#4
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 4100 problems :( The def that I recall, which has been may years now. userid: administrator password: <blank, no password> May have to look it up in the user guide. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

03-01-2009, 12:49 PM	#5
Joe2003 Cooling Neophyte Join Date: Feb 2009 Location: home Posts: 3	Re: Snap 4100 problems :( ok i was being a retard. I was arpscaning to finds its address and was connecting to my router rather than the server. Can now get on it fine thanks!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)