Water setup done!

Syncore · 11-02-2002, 01:14 AM

My second rig is done and I am really pleased on how it worked out. Mainly posting to thank everyone because I learn all my stuff from this forum even though I don't post myself. Hopefully I will get some pics soon.

The setup is your standard DTek style heatercore, Via Aqua 1300 and Maze3 with an airtrap. The one thing I did that I havent seen much is I used a 24v 172mm fan running at 12v pushing air through the heater. It's roughly the same size as the heatercore and pushes massive air while being quiet since its running at 12v.

Everything is internal and fits well in the Chieftec case that is way too common.

Specs:
Asus P4PE
P4 2.53 @ 3.0ghz
Samsung PC2700 @ DDR400

Temps:
The temp hasn't gone above 39c yet even while running stress tests like Prime95. It's sitting at a nice 35c as I write this.

nexxo · 11-02-2002, 03:40 AM

Don't tease us, show us some pics!

11-02-2002, 01:14 AM	#1
Syncore Cooling Neophyte Join Date: Aug 2002 Location: Albuquerque, NM Posts: 5	Water setup done! My second rig is done and I am really pleased on how it worked out. Mainly posting to thank everyone because I learn all my stuff from this forum even though I don't post myself. Hopefully I will get some pics soon. The setup is your standard DTek style heatercore, Via Aqua 1300 and Maze3 with an airtrap. The one thing I did that I havent seen much is I used a 24v 172mm fan running at 12v pushing air through the heater. It's roughly the same size as the heatercore and pushes massive air while being quiet since its running at 12v. Everything is internal and fits well in the Chieftec case that is way too common. Specs: Asus P4PE P4 2.53 @ 3.0ghz Samsung PC2700 @ DDR400 Temps: The temp hasn't gone above 39c yet even while running stress tests like Prime95. It's sitting at a nice 35c as I write this.

11-02-2002, 03:40 AM	#2
nexxo Cooling Savant Join Date: Jul 2002 Location: Brimingham, UK Posts: 385	Don't tease us, show us some pics! __________________ "There is a thin line between magic and madness"

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)