Ram sinks

Phuzun · 04-07-2003, 02:56 AM

Anyone here made waterblocks for ram? I've seen one pic ever of something like that. Never made a block myself. But if you ran a single or spaced apart pair you might be able to fit them on a mobo that can have one open space inbetween the 2.

Maybe something similar to a normal spreader, only a bit thicker, for flow. Maybe the same as a spreader, flow goes over top area of the spreader, and can fit a peltier to freeze the memory.

Just an idea I had once. Dont have any money. But would love to see it.

If someone knows where to post pics for display I'll draw something in paint to better show my idea.

Throw in your ideas. Maybe somebody that builds these will try something. Not sure how high a water cooled ram or even peltier cooled would go.

Mark Larson · 04-07-2003, 03:05 AM

http://www.zerofanzone.co.uk/largepi...0large&ext=jpg

Phuzun · 04-07-2003, 04:41 AM

Yeah, but thats on the video card. The thread about ghetto cooling, has some ram stuff.

msv · 04-07-2003, 04:56 AM

Once checked RAM-temps with hand. Touched two chips on RAM-module, computer rebooted.
Copper is quite conductive, more than my fingers.
Was it just bad luck with my RAM, anything suspicious? Yes, I´ve seen WB:s on video-RAM. Shouldn´t be there if it didn´t work.
Is there a problem with conductance between memory modules on the RAM-stick?
regards
Mikael S.

04-07-2003, 02:56 AM	#1
Phuzun Cooling Neophyte Join Date: Apr 2003 Location: Fargo, ND USA Posts: 47	Ram sinks Anyone here made waterblocks for ram? I've seen one pic ever of something like that. Never made a block myself. But if you ran a single or spaced apart pair you might be able to fit them on a mobo that can have one open space inbetween the 2. Maybe something similar to a normal spreader, only a bit thicker, for flow. Maybe the same as a spreader, flow goes over top area of the spreader, and can fit a peltier to freeze the memory. Just an idea I had once. Dont have any money. But would love to see it. If someone knows where to post pics for display I'll draw something in paint to better show my idea. Throw in your ideas. Maybe somebody that builds these will try something. Not sure how high a water cooled ram or even peltier cooled would go. __________________ 1.2ghz Tbird KT7a-Raid w/ Crystal Orb 384MB 133mhz 40x2 Maxtor HD in Raid 0 27gb IBM ata100 Ati 8500 / crystal orb, homemade ramsinks Sblive Platinum Maze 3-1 Black Ice Radiator NIC card 7 volts runnin to all fans /cept the orbs

04-07-2003, 03:05 AM	#2
Mark Larson Cooling Neophyte Join Date: Feb 2003 Location: MN Posts: 67	http://www.zerofanzone.co.uk/largepi...0large&ext=jpg __________________ AMD Fanboy.

04-07-2003, 04:41 AM	#3
Phuzun Cooling Neophyte Join Date: Apr 2003 Location: Fargo, ND USA Posts: 47	Yeah, but thats on the video card. The thread about ghetto cooling, has some ram stuff. __________________ 1.2ghz Tbird KT7a-Raid w/ Crystal Orb 384MB 133mhz 40x2 Maxtor HD in Raid 0 27gb IBM ata100 Ati 8500 / crystal orb, homemade ramsinks Sblive Platinum Maze 3-1 Black Ice Radiator NIC card 7 volts runnin to all fans /cept the orbs

04-07-2003, 04:56 AM	#4
msv Cooling Savant Join Date: Dec 2002 Location: Sweden Posts: 336	Once checked RAM-temps with hand. Touched two chips on RAM-module, computer rebooted. Copper is quite conductive, more than my fingers. Was it just bad luck with my RAM, anything suspicious? Yes, I´ve seen WB:s on video-RAM. Shouldn´t be there if it didn´t work. Is there a problem with conductance between memory modules on the RAM-stick? regards Mikael S.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)