Go Back   Pro/Forums > ProCooling Technical Discussions > Heatsink/ Heat Pipe / ThermoSiphon Cooling
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

Heatsink/ Heat Pipe / ThermoSiphon Cooling The cat will only make the mistake of putting its paw by your HSF once. :) Also the place to discuss the new high end heat pipe goodness.

Reply
Thread Tools
Unread 04-16-2005, 02:09 AM   #1
leejsmith
Cooling Savant
 
leejsmith's Avatar
 
Join Date: Mar 2003
Location: notts uk
Posts: 408
Default whats best for fixing heatsinks to power circuits

I am in the process of uprading to a ic7 max to try and get the most out of my p4 2.8C currently @ 3.5 250fsb 1.55v on a p4p800. I got the ic7 max 3 from a b grade section for only £30.

Searching the net for most common max3 mods that i can do myself i orderd some heatsinks and have cut them to size to replace the otes system and also for every other power reg on the board but i am not sure on the best way of mounting them.
I can get some arctic silver epox or some thermal epox or would anything else do like superglue .I read someware that rtv silicon will work giving me the option to remove them later.

Lee
__________________
Folding , Folding , Folding !
leejsmith is offline   Reply With Quote
Unread 04-16-2005, 09:16 AM   #2
Brians256
Pro/Staff
 
Brians256's Avatar
 
Join Date: Oct 2001
Location: Klamath Falls, OR
Posts: 1,439
Default

You can mix Arctic Silver with Epoxy for a removable heatsink. Just make sure you use enough Arctic Silver to make the epoxy not permanent.
Brians256 is offline   Reply With Quote
Unread 04-16-2005, 09:27 AM   #3
leejsmith
Cooling Savant
 
leejsmith's Avatar
 
Join Date: Mar 2003
Location: notts uk
Posts: 408
Default

just normal epoxy i dont need a certain type ?
__________________
Folding , Folding , Folding !
leejsmith is offline   Reply With Quote
Unread 04-16-2005, 10:55 AM   #4
scooterfl
Cooling Neophyte
 
scooterfl's Avatar
 
Join Date: Jul 2004
Location: FL
Posts: 83
Default

I believe he was referring to Arctic Silver Epoxy and mixing some regular AS with it
__________________
scooterfl is offline   Reply With Quote
Unread 04-16-2005, 11:00 AM   #5
leejsmith
Cooling Savant
 
leejsmith's Avatar
 
Join Date: Mar 2003
Location: notts uk
Posts: 408
Default

thats what i thought thanks for the help
__________________
Folding , Folding , Folding !
leejsmith is offline   Reply With Quote
Unread 04-16-2005, 11:42 AM   #6
pHaestus
Big Player
Making Big Money
 
pHaestus's Avatar
 
Join Date: Aug 2001
Location: irc.lostgeek.com #procooling.com
Posts: 4,782
Default

I know Arctic Silver used to sell some non-silver thermal epoxy. I've always used it so that I didn't have to worry about getting silver on any of the memory packaging or pcb traces or anything if it squished out under pressure.

And pressure while it cures is important of course
__________________
Getting paid like a biker with the best crank...
-MF DOOM
pHaestus is offline   Reply With Quote
Unread 04-16-2005, 01:15 PM   #7
dacooltech
Pro/Vendor
 
dacooltech's Avatar
 
Join Date: Feb 2002
Location: NYC
Posts: 267
Default

Quote:
Originally Posted by pHaestus
I know Arctic Silver used to sell some non-silver thermal epoxy. I've always used it so that I didn't have to worry about getting silver on any of the memory packaging or pcb traces or anything if it squished out under pressure.

And pressure while it cures is important of course
I think you mean the Arctic Alumina Thermal Adhesive pH.

I agree with pH use Alumina Epoxy intead of silver. You can weaken the bond by mixing it with regular Arctic Alumina thermal compound like Brian said.

Bruce
__________________
www.cooltechnica.com
dacooltech is offline   Reply With Quote
Unread 04-16-2005, 03:09 PM   #8
pHaestus
Big Player
Making Big Money
 
pHaestus's Avatar
 
Join Date: Aug 2001
Location: irc.lostgeek.com #procooling.com
Posts: 4,782
Default

yes Bruce that's what I was trying to remember: Arctic Alumina thermal adhesive. That stuff works pretty well!
__________________
Getting paid like a biker with the best crank...
-MF DOOM
pHaestus is offline   Reply With Quote
Unread 04-16-2005, 03:17 PM   #9
MadHacker
Cooling Savant
 
MadHacker's Avatar
 
Join Date: May 2003
Location: Okotoks, A.B. Canada
Posts: 726
Default

I used that mixing 50% Artic Silver Epoxy and 50% AS3 to mount some heatsinks onto my voltage regulators that I cut out of an old P2 heastsink.
Few months later I had to RMA my board. Couple twists and the heatsink came right off...
was able to scrap any extra AS off the voltage regulators with my finger nail.
my 2¢
__________________
"Great spirits have always encountered violent
opposition from mediocre minds" - (Einstein)
MadHacker is offline   Reply With Quote
Unread 04-16-2005, 08:08 PM   #10
dacooltech
Pro/Vendor
 
dacooltech's Avatar
 
Join Date: Feb 2002
Location: NYC
Posts: 267
Default

I've been using Artic Alumina epoxy to put RAMsinks on to the VGA memory for the last couple years, and it works great. I prefer Alumina over Silver, because it's non conductive.

MadHacker, I think 50% mixture is a bit too much. The bond maybe too weak. It might be the right amount for voltage regulators, but I normally use 30-35% Alumina thermal compound, and 65-70% Arctic Alumina Thermal adhesive, and I still was able remove them later.
__________________
www.cooltechnica.com
dacooltech is offline   Reply With Quote
Unread 04-16-2005, 08:49 PM   #11
MadHacker
Cooling Savant
 
MadHacker's Avatar
 
Join Date: May 2003
Location: Okotoks, A.B. Canada
Posts: 726
Default

Quote:
Originally Posted by dacooltech
MadHacker, I think 50% mixture is a bit too much. The bond maybe too weak. It might be the right amount for voltage regulators,...
just saying it worked well for me...
my temperature of the 2 voltage regulators that were getting realy hot, were a lot cooler... I wasn't able to overclock more with them added heatsinks but i found i didn't have to have my Fans at 100% to maintain the overclock...
another 2¢.. guess that make it 4¢ now hehehe
__________________
"Great spirits have always encountered violent
opposition from mediocre minds" - (Einstein)
MadHacker is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 12:38 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...