delete

LiquidRulez · 05-17-2003, 09:33 PM

PLease delete.wont let me delete it

pippin88 · 05-17-2003, 09:39 PM

Nice!

I notice how you have the option of not using the middle plate for peltier use if you want?

Looks like a nice versatile block.

jaydee · 05-17-2003, 09:49 PM

SparkedFire · 05-17-2003, 10:36 PM

I agree.

If i see right, why did you use different fitting sizes. I am guessing because of of the broad area of holes in one of the plates?

Do you plan on selling it?

Cathar · 05-17-2003, 11:55 PM

Looks very nice. Should perform well, even with peltiers.

I gotta say it though, that's a heck of a lot a machine time to make something like that. At a rough estimate, we'd be looking at something approaching two hours just to mill that out if they are 1mm wide channels. If 1.5mm (or 1/16") wide you should be able to get it down to around 1 hour.

LiquidRulez · 05-18-2003, 01:22 AM

??

JCYC5 · 05-18-2003, 01:28 AM

what program did you use for that render?

winewood · 05-18-2003, 02:57 AM

Quote:

Any more details will not be revealed until I have an actual working model in my hand. And those of you who have had your hard work copied can understand where Im coming from.
Im not trying to be a jerk. I just have to protect myself.....
ANyone who thinks that they are going to replicate my design at anytime in the future, for their own financial gain, better think again, as I have covered myself before revealing anything in a public forum.....whether its worth anything or not......its my work, my design and you bet your @ss that Im going to protect it at what ever cost.
I just wanted to get that out of the way from the start.

Nice work LR. I was wondering why revealing this at all? If you plan to hopefully sell this idea, why not wait till you had good CW figures in hand with a working prototype? I don't think anyone would buy it without them. Aside from all that, I had an understanding that you couldnt patent a block? If it isn't patented, then how else could you protect yourself? Since I think you design has so much potential, why not just edit and remove this thing now, and save yourself some grief. I'm not attempting to argue, just protect a good idea for YOUR profit.

Also, how can you simulate this? I have an idea on a block as well, but didn't even think of simulating it on computer first.

Puzzdre · 05-18-2003, 03:19 AM

As many ppl before me said:

Congrats on the project! One thing I would do (but not sure it's needed) is, the wall between inlet(s) and outlet hole in the base plate, I would make it little thicker, probably leaving some more material on the inner side (inner most channel) so with the O ring and good clamping to prevent 'leaks' between inlets and outlet holes...

Great work!

Cheers

MadDogMe · 05-18-2003, 04:07 AM

Where is it?. there's no pics/links in the first post...

If you deleted them why did'nt you delete the whole thread?...

hara · 05-18-2003, 04:29 AM

I wanna see it. Where is it?

MadDogMe · 05-18-2003, 04:33 AM

There's an option right at the top of the editing screen that you have to tick a box in. Probably have to be an emty thread though, as in nobody browsing/reading in it

...

I would of liked to have seen the pics ...

pippin88 · 05-18-2003, 05:34 AM

Eh, WTF did he remove the pics for?

JCYC5 · 05-18-2003, 05:52 AM

why did you delete it?

satanicoo · 05-19-2003, 05:06 PM

damn, too late

pm me the pic plz

jaydee · 05-22-2003, 03:32 PM

Quote:

Originally posted by LiquidRulez
PLease delete.wont let me delete it

To late! I should have a batch up for sale in couple days!

gone_fishin · 05-22-2003, 04:10 PM

Ooooooooooohhhhhhhhh, paranoia. Been hitin the bong?

05-17-2003, 09:33 PM	#1
LiquidRulez Cooling Savant Join Date: Sep 2002 Location: In Hell Posts: 322	delete PLease delete.wont let me delete it __________________ GOt H20 ? Last edited by LiquidRulez; 05-18-2003 at 04:14 AM.

05-17-2003, 10:36 PM	#4
SparkedFire Cooling Savant Join Date: Apr 2003 Location: The Matrix Posts: 114	I agree. If i see right, why did you use different fitting sizes. I am guessing because of of the broad area of holes in one of the plates? Do you plan on selling it? __________________ If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it.

05-18-2003, 01:22 AM	#6
LiquidRulez Cooling Savant Join Date: Sep 2002 Location: In Hell Posts: 322	?? __________________ GOt H20 ? Last edited by LiquidRulez; 05-18-2003 at 04:15 AM.

05-18-2003, 03:19 AM	#9
Puzzdre Cooling Savant Join Date: Aug 2002 Location: Croatia Posts: 969	As many ppl before me said: Congrats on the project! One thing I would do (but not sure it's needed) is, the wall between inlet(s) and outlet hole in the base plate, I would make it little thicker, probably leaving some more material on the inner side (inner most channel) so with the O ring and good clamping to prevent 'leaks' between inlets and outlet holes... Great work! Cheers __________________ 'Out of cheese error... ...please reboot the universe (press the GBL to continue)'

05-18-2003, 04:29 AM	#11
hara Cooling Savant Join Date: Oct 2002 Location: Malta, Mediterranean Posts: 662	I wanna see it. Where is it? __________________ - Every great HD crash day is the day before back-up day. - My Past System - "Better to reign in Hell than serve in Heaven." - Milton, Paradise Lost. - FMZ

05-17-2003, 09:39 PM	#2
pippin88 Cooling Savant Join Date: Oct 2002 Location: Australia Posts: 285	Nice! I notice how you have the option of not using the middle plate for peltier use if you want? Looks like a nice versatile block.

05-17-2003, 09:49 PM	#3
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506

05-17-2003, 11:55 PM	#5
Cathar Thermophile Join Date: Sep 2002 Location: Melbourne, Australia Posts: 2,538	Looks very nice. Should perform well, even with peltiers. I gotta say it though, that's a heck of a lot a machine time to make something like that. At a rough estimate, we'd be looking at something approaching two hours just to mill that out if they are 1mm wide channels. If 1.5mm (or 1/16") wide you should be able to get it down to around 1 hour.

05-18-2003, 01:28 AM	#7
JCYC5 Cooling Savant Join Date: Apr 2003 Location: Hong Kong Posts: 102	what program did you use for that render?

05-18-2003, 04:07 AM	#10
MadDogMe Thermophile Join Date: Aug 2002 Location: Just shut up ;) ... Posts: 1,068	Where is it?. there's no pics/links in the first post... If you deleted them why did'nt you delete the whole thread?...

05-18-2003, 04:33 AM	#12
MadDogMe Thermophile Join Date: Aug 2002 Location: Just shut up ;) ... Posts: 1,068	There's an option right at the top of the editing screen that you have to tick a box in. Probably have to be an emty thread though, as in nobody browsing/reading in it ... I would of liked to have seen the pics ...

05-18-2003, 05:34 AM	#13
pippin88 Cooling Savant Join Date: Oct 2002 Location: Australia Posts: 285	Eh, WTF did he remove the pics for?

05-18-2003, 05:52 AM	#14
JCYC5 Cooling Savant Join Date: Apr 2003 Location: Hong Kong Posts: 102	why did you delete it?

05-19-2003, 05:06 PM	#15
satanicoo Cooling Savant Join Date: Nov 2002 Location: portugal Posts: 635	damn, too late pm me the pic plz

05-22-2003, 04:10 PM	#17
gone_fishin Cooling Savant Join Date: May 2002 Location: Da UP Posts: 517	Ooooooooooohhhhhhhhh, paranoia. Been hitin the bong?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)