Problems with my TBIRD

honez · 07-20-2001, 03:54 AM

I have been over this system time and time again with munkeys, gurus, and a voodoo man...here is the prob. Can't get this 1.2 AXIA FSB 200mhz processor to run at spec! It will not boot into WIN2K at 1.2 12*100 at 1.75 volts. When I bump the voltage up it won't boot...when I bump it more still nothing. I can run it at 1.33ghz 10*133 at 1.80 volts...but it runs too damn hot! 50C no load...sometimes dipping to 48-49C. I have now underclocked it to 1150 at 1.75volts and it is behaving...but at 43C verry little load.
I have a Thermaltake SuperOrb the fans are running at spec. but it seems to be not working well enough.

Would the high temps cause WIN2K to give PageFaults and crash out (reboot)? If so what would be a decent heatsink fan combo...not ready to go to watercooling just yet...still pondering that big question...plus I move my system around alot so water might not be ideal for me just yet.

Ps my mobo settings on memory timings are extremely conservative so as to not add additional instability into the system...I would rather get it running right then play

Also yes I did use thermal paste..just not Arctic Silver

resago · 07-20-2001, 11:24 AM

get the ThermalRight sk6.

orbs suck.

LmA · 07-20-2001, 11:31 AM

but, HELLO, SUPERORB?

all orb´s are ****ed up cooling.. thay are worth nothing..

the only good use is as candelligts..

take a look at http://keyser.dyndns.org/orb.htm

and you will c what i mean.. :_)))

Microsoft · 07-20-2001, 09:08 PM

get a zalman 5000 and youll do fine

07-20-2001, 03:54 AM	#1
honez Cooling Neophyte Join Date: Jul 2001 Location: Starkvegas (Starkville) MS Posts: 1	Problems with my TBIRD I have been over this system time and time again with munkeys, gurus, and a voodoo man...here is the prob. Can't get this 1.2 AXIA FSB 200mhz processor to run at spec! It will not boot into WIN2K at 1.2 12100 at 1.75 volts. When I bump the voltage up it won't boot...when I bump it more still nothing. I can run it at 1.33ghz 10133 at 1.80 volts...but it runs too damn hot! 50C no load...sometimes dipping to 48-49C. I have now underclocked it to 1150 at 1.75volts and it is behaving...but at 43C verry little load. I have a Thermaltake SuperOrb the fans are running at spec. but it seems to be not working well enough. Would the high temps cause WIN2K to give PageFaults and crash out (reboot)? If so what would be a decent heatsink fan combo...not ready to go to watercooling just yet...still pondering that big question...plus I move my system around alot so water might not be ideal for me just yet. Ps my mobo settings on memory timings are extremely conservative so as to not add additional instability into the system...I would rather get it running right then play Also yes I did use thermal paste..just not Arctic Silver __________________ Stoopid people are happy...the rest are smart. Abit KT7A-RAID 1.2 Athlon (AXIA by luck) 1gb PC133 RAM 216.8gb Maxtor UDMA66 in RAID0 140gb Maxtor UDMA66 (mp3 drive) Elsa Gladiac MX 32mb 16x10x40x TDK VeloCD Burner DVD 15inch KDS Rad-5 Flat Pannel Lovin a tall tower with munkeys running rampant inside!

07-20-2001, 11:24 AM	#2
resago Cooling Savant Join Date: Mar 2001 Location: state of denial Posts: 488	get the ThermalRight sk6. orbs suck. __________________ 2.4Ghz Compaq Workstation 2.8Ghz Custom 2700+ Custom still running 2000!!!! Help with Coding www.resago.com

07-20-2001, 09:08 PM	#4
Microsoft Cooling Savant Join Date: Nov 2000 Posts: 286	get a zalman 5000 and youll do fine __________________ Moderator: www.procooling.com take a pill then Aki in Leather: http://www.tenarrus.com/kcdms/akiinleder001.jpg

07-20-2001, 11:31 AM	#3
LmA Cooling Neophyte Join Date: Jul 2001 Posts: 7	but, HELLO, SUPERORB? all orb´s are ****ed up cooling.. thay are worth nothing.. the only good use is as candelligts.. take a look at http://keyser.dyndns.org/orb.htm and you will c what i mean.. :_)))

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)