|
|
Hardware and Case Mod's You Paint it, Cut it, Solder it, bend it, light it up, make it glow or anything like that, here is your forum. |
Thread Tools |
06-17-2003, 06:32 AM | #1 |
Cooling Savant
Join Date: Apr 2003
Location: 4-sided room with an exit going east, and an exit going south
Posts: 392
|
Complaint about YY-Cube
The way they designed the airflow path at the front of the case is quite inefficient. It's severely restricting the flow of air into the case, and I'm going to have to mod the case's front cover to allow fresh air to come directly in from the front instead of being drawn in from underneath.
__________________
My Watercooling Stuff |
06-17-2003, 07:06 AM | #2 |
Cooling Savant
Join Date: Dec 2002
Location: Sweden
Posts: 336
|
Yep, and the left part of the front is quite narrow. Checking Kevins YY-cube shows that You can get 90 mm holes in the front, and there is supposed to be a 120 mm fan in the very same front.
If I don´t mistake myself there are a few diods in the upper left corner of the front that shows disk access, so You can´t make any holes too high up on the front. It´s a qiute "sealed" case. 1 air outlet that steals air from CPU HSF and 2 outlets to cool the disks above PSU. Should take some modding to get some *in* the case. regards Mikael S. |
06-18-2003, 09:00 AM | #3 |
Cooling Neophyte
Join Date: Nov 2002
Location: usa
Posts: 84
|
yeah, I hated that too on the case, I ended up taking the duct I used to have on the side of the case, cutting a hole in the front panel and putting it there, was a good fit and looks nice too.
__________________
Athlon 64 3000+ Venice / Asus A8N-SLI Premium / 2X Corsair XMS 512mb PC3200 BFG 7800GTX / Audigy 2 / Dell FP2001 20.1" / Antec TruePower 2.0 TPII-550 WD Raptor 36.7GB / WD Raptor 74GB / Maxtor 120GB SATA Water Cooled: CPU Swiftech Storm / GPU Maze 4 / Danger Den Double Heater core / Eheim 1250 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|