|
|
Random Nonsense / Geek Stuff All those random tech ramblings you can't fit anywhere else! |
Thread Tools |
09-18-2004, 08:51 PM | #1 |
Cooling Neophyte
Join Date: Jul 2004
Location: Oklahoma
Posts: 62
|
Looking for PSU schematics
I have 2 different versions of some IBM server power supplies, and I am having trouble finding shcematics. I would gladly give one to somebody if they paid the freight if they can find schematics. I just want to be able to use one to drive case fans, pumps, cathodes, etc. The supplies are as follows:
Delta PN DPS-420CB Magnetek 3722-40-1 I guess if nothing else I can sit down with a meter and get the different signals on the output side. I dont know if these things had propiertary pin outs or what. |
09-18-2004, 09:11 PM | #2 |
Responsible for 2%
of all the posts here. Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
|
A meter is by far the easiest solution.
I've tried to obtain diagrams, but unless you know someone at IBM, you're not going to get them. Check out my PSU array thread (linked in sig) for some diagrams. |
09-21-2004, 07:29 PM | #3 |
Responsible for 2%
of all the posts here. Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
|
I'm posting the pics, for everyone's benefit:
I see the custom 24 pin connector, I'm just not sure how the db15 connector is used here. Anyone else? [edit]resized the pics... Last edited by bigben2k; 09-21-2004 at 07:41 PM. |
09-22-2004, 08:48 AM | #4 |
Cooling Savant
Join Date: Sep 2002
Location: Saskatoon, Saskatchewan
Posts: 294
|
If that is from a server, then the server may well have redundant power supplies, and the DB-15 connector may be a communications port relating to that.
__________________
Can anyone else here say that they have a watercooled monster that's 45" tall? |
09-22-2004, 03:23 PM | #5 |
Responsible for 2%
of all the posts here. Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
|
Yeah, that's what I thought too. The only question left would be how to turn it on, and if that requires that a signal be sent through the db15 connector.
Let's assume for a moment that the DB15 is simply to get a status on the PSU. There's still 24 pins on that power connector. If one plugs it in, it should be possible to at least identify, if there is one, which line is the 5 volt standby (which is always on). Step one really ought to be to identify which pins are used for ground. Once one pin has been identified, it should be a simple exercise of identifying which other ones are also ground. It should be possible to do this with a voltmeter, while the PSU is OFF, and should be relatively easy, asuming that the case is also grounded. |
09-22-2004, 06:37 PM | #6 | |
Cooling Neophyte
Join Date: Jul 2004
Location: Oklahoma
Posts: 62
|
Metering the psu
Quote:
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|