Digidoc 5 probes

derraa · 04-22-2002, 02:59 PM

Hey. I was wondering if any of you guys knew a good place to buy the film type sensors for a digidoc 5. It only came with 2, one of which I messed up, and the other just started reporting like 150F when the other day it only said like 90F. My motherboard sensor is all I have now, and it is not very acurate. Epox didnt do a very good job with that one.(8k3a+) Thanks

cabmeister · 04-22-2002, 04:59 PM

Ive been trying myself to aquire a few ,without much luck.Only 2 places I have found them and both were out of stock.1: is Jameco and they wrote me saying they had no idea when or even if they will have them . Plycon told me a couple of weeks ago they exspect them in , in a couple of weeks but to date I have not seen them .

DigitalChaos · 04-22-2002, 05:39 PM

here ya go guys : http://www.jameco.com/cgi-bin/ncomme...&search=148769

i ordered some of them and they are exactly what comes with the DD

derraa · 04-22-2002, 07:00 PM

Thanks for the help. It is unfortunate that they are not in stock

DigitalChaos · 04-22-2002, 09:36 PM

seriously? i musta ordered the last ones..... i remember tryin to get 10.. and it said they didnt have them.. so i got 6

that was like... 2 weeks ago though

derraa · 04-22-2002, 10:13 PM

Just my luck to be 2 weeks too late.

You must have the last 6. I hope plycon gets some soon

cabmeister · 04-22-2002, 10:46 PM

Yep sounds about right i only got the Jameco info like last week .
Me as well , infact i`ll rattle Plycons cage and send them another E-mail.

Brad · 04-23-2002, 02:12 AM

from memory some stores sell them as 'asus p2b' probe (or p2something)

cabmeister · 04-23-2002, 04:37 PM

Yes Brad your right . Now don`t ya know I can`t find the link I had but I did look at them . Unfortunatly there wern`t a close up , but they look like the bulb type with the Kapton tape over the end ,sorta like a flat probe but not as thin. As I say couldn`t get a good peek at it .I received a reply from Tony at Plycon and he told me he found like 4

but they went in like seconds

. Oh well I`m sure there will be some around soon .

derraa · 04-23-2002, 06:10 PM

They have 19 p2t's at http://www.shopblt.com. There is a brocure available to download... That might help determine if it will work. In the brochure, the end is covered in tape, so it is hard to see. I bought one of these a long time ago, and I think it was like the digidoc ones, but it looks to have a short cable.

04-22-2002, 02:59 PM	#1
derraa Cooling Neophyte Join Date: Jan 2002 Location: RI (no, we are not part of NY) Posts: 95	Digidoc 5 probes Hey. I was wondering if any of you guys knew a good place to buy the film type sensors for a digidoc 5. It only came with 2, one of which I messed up, and the other just started reporting like 150F when the other day it only said like 90F. My motherboard sensor is all I have now, and it is not very acurate. Epox didnt do a very good job with that one.(8k3a+) Thanks

04-22-2002, 04:59 PM	#2
cabmeister Cooling Neophyte Join Date: Mar 2002 Location: Lehigh Acres , Florida Posts: 41	Ive been trying myself to aquire a few ,without much luck.Only 2 places I have found them and both were out of stock.1: is Jameco and they wrote me saying they had no idea when or even if they will have them . Plycon told me a couple of weeks ago they exspect them in , in a couple of weeks but to date I have not seen them . __________________ Learning is a step in the right direction for those willing to listen. http://www.cabmeister.com

04-22-2002, 10:46 PM	#7
cabmeister Cooling Neophyte Join Date: Mar 2002 Location: Lehigh Acres , Florida Posts: 41	Yep sounds about right i only got the Jameco info like last week . Me as well , infact i`ll rattle Plycons cage and send them another E-mail. __________________ Learning is a step in the right direction for those willing to listen. http://www.cabmeister.com

04-23-2002, 02:12 AM	#8
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	from memory some stores sell them as 'asus p2b' probe (or p2something) __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-23-2002, 04:37 PM	#9
cabmeister Cooling Neophyte Join Date: Mar 2002 Location: Lehigh Acres , Florida Posts: 41	Yes Brad your right . Now don`t ya know I can`t find the link I had but I did look at them . Unfortunatly there wern`t a close up , but they look like the bulb type with the Kapton tape over the end ,sorta like a flat probe but not as thin. As I say couldn`t get a good peek at it .I received a reply from Tony at Plycon and he told me he found like 4 but they went in like seconds . Oh well I`m sure there will be some around soon . __________________ Learning is a step in the right direction for those willing to listen. http://www.cabmeister.com

04-22-2002, 05:39 PM	#3
DigitalChaos Cooling Savant Join Date: Jan 2002 Location: Waukesha, Wi Posts: 698	here ya go guys : http://www.jameco.com/cgi-bin/ncomme...&search=148769 i ordered some of them and they are exactly what comes with the DD

04-22-2002, 07:00 PM	#4
derraa Cooling Neophyte Join Date: Jan 2002 Location: RI (no, we are not part of NY) Posts: 95	Thanks for the help. It is unfortunate that they are not in stock

04-22-2002, 09:36 PM	#5
DigitalChaos Cooling Savant Join Date: Jan 2002 Location: Waukesha, Wi Posts: 698	seriously? i musta ordered the last ones..... i remember tryin to get 10.. and it said they didnt have them.. so i got 6 that was like... 2 weeks ago though

04-22-2002, 10:13 PM	#6
derraa Cooling Neophyte Join Date: Jan 2002 Location: RI (no, we are not part of NY) Posts: 95	Just my luck to be 2 weeks too late. You must have the last 6. I hope plycon gets some soon

04-23-2002, 06:10 PM	#10
derraa Cooling Neophyte Join Date: Jan 2002 Location: RI (no, we are not part of NY) Posts: 95	They have 19 p2t's at http://www.shopblt.com. There is a brocure available to download... That might help determine if it will work. In the brochure, the end is covered in tape, so it is hard to see. I bought one of these a long time ago, and I think it was like the digidoc ones, but it looks to have a short cable.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)