hole patern for an FX5900 ultra (ram heatsink, not GPU)

shiltz · 08-25-2003, 04:40 PM

I was wondering if anyone has the dimentions for all the ram heatsink holes on an FX5900 ultra, don't care about the ones for the GPU as i'm going to be using a maze 4 for the GPU but I want to make my own heatsink or water block (not sure which yet) for the ram on it.

dima y · 08-26-2003, 02:01 AM

hmmmm how much would you pay for them?

j/k give me 24hrs and i will post a pic ok?

dima y · 08-26-2003, 04:03 AM

here you go. good luck

drop me a note when you are done i want to see what you came up with!

shiltz · 08-26-2003, 08:19 AM

thanks, that's perfect, now to see what I can come up with for what I have for tools to work with

08-25-2003, 04:40 PM	#1
shiltz Cooling Neophyte Join Date: Nov 2002 Location: usa Posts: 84	hole patern for an FX5900 ultra (ram heatsink, not GPU) I was wondering if anyone has the dimentions for all the ram heatsink holes on an FX5900 ultra, don't care about the ones for the GPU as i'm going to be using a maze 4 for the GPU but I want to make my own heatsink or water block (not sure which yet) for the ram on it. __________________ Athlon 64 3000+ Venice / Asus A8N-SLI Premium / 2X Corsair XMS 512mb PC3200 BFG 7800GTX / Audigy 2 / Dell FP2001 20.1" / Antec TruePower 2.0 TPII-550 WD Raptor 36.7GB / WD Raptor 74GB / Maxtor 120GB SATA Water Cooled: CPU Swiftech Storm / GPU Maze 4 / Danger Den Double Heater core / Eheim 1250

08-26-2003, 08:19 AM	#4
shiltz Cooling Neophyte Join Date: Nov 2002 Location: usa Posts: 84	thanks, that's perfect, now to see what I can come up with for what I have for tools to work with __________________ Athlon 64 3000+ Venice / Asus A8N-SLI Premium / 2X Corsair XMS 512mb PC3200 BFG 7800GTX / Audigy 2 / Dell FP2001 20.1" / Antec TruePower 2.0 TPII-550 WD Raptor 36.7GB / WD Raptor 74GB / Maxtor 120GB SATA Water Cooled: CPU Swiftech Storm / GPU Maze 4 / Danger Den Double Heater core / Eheim 1250

08-26-2003, 02:01 AM	#2
dima y Cooling Savant Join Date: Nov 2002 Location: palo alto, CA Posts: 164	hmmmm how much would you pay for them? j/k give me 24hrs and i will post a pic ok?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)