Best #Rotor block design corner - Page 4

Puzzdre · 01-08-2003, 05:51 AM

No, it would leak like mad...

I used ordinary bathroom silicone, #Rotor uses goop, g.i.amour used glue...

Use what is handy or easy obtainable to you, just take care that you have matching surfaces sanded (mine was sanded to 600 grit) and perfectly flat. Don't use silicone that cannot stand higher temperatures (one I used can stand 100 °C). Ofcourse, do a leak test before you put the block into the machine, and be patient and let the sealant dry (I couldn't wait more than half an hour, the block leaked...)

G'luck!!!

Puzzdre · 01-08-2003, 05:55 AM

You can find sorta how-to here in this thread, see all the perils of the job

http://forums.procooling.com/vbb/sho...p&pagenumber=3

01-08-2003, 05:51 AM	#76
Puzzdre Cooling Savant Join Date: Aug 2002 Location: Croatia Posts: 969	No, it would leak like mad... I used ordinary bathroom silicone, #Rotor uses goop, g.i.amour used glue... Use what is handy or easy obtainable to you, just take care that you have matching surfaces sanded (mine was sanded to 600 grit) and perfectly flat. Don't use silicone that cannot stand higher temperatures (one I used can stand 100 °C). Ofcourse, do a leak test before you put the block into the machine, and be patient and let the sealant dry (I couldn't wait more than half an hour, the block leaked...) G'luck!!! __________________ 'Out of cheese error... ...please reboot the universe (press the GBL to continue)'

01-08-2003, 05:55 AM	#77
Puzzdre Cooling Savant Join Date: Aug 2002 Location: Croatia Posts: 969	You can find sorta how-to here in this thread, see all the perils of the job http://forums.procooling.com/vbb/sho...p&pagenumber=3 __________________ 'Out of cheese error... ...please reboot the universe (press the GBL to continue)'

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)