Go Back   Pro/Forums > ProCooling Technical Discussions > Snap Server / NAS / Storage Technical Goodies
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

Snap Server / NAS / Storage Technical Goodies The Home for Snap Server Hacking, Storage and NAS info. And NAS / Snap Classifides

Reply
Thread Tools
Unread 12-03-2012, 07:16 PM   #1
dgungadoo
Cooling Neophyte
 
Join Date: Nov 2012
Location: London
Posts: 4
Default Hardware Password Reset on SnapServer 410 - failure

After doing a Fresh Install of GardianOS 5.2.067 on a SnapServer 410, the login/password got screwed up (it's supposed to be admin/admin).

So using the Reset Button procedure (Hold Reset button while booting, press twice for reset password, etc...), I still can't login.

In PUTTY (Serial port), while booting, I intercepted this message however:

tQinfo: ------- Qinfo RESET --------
tQinfo: Handle reset option with rw_opt=1, hw_opt=00000000, mfg_opt=0
Could not get MAC address via socket
Could not get actual number from eth0, using 16999 default
cp: accessing `/flash/userlist.txt': Too many levels of symbolic links
change_passwdrec: Error opening file '/flash/userlist.txt' to read.cp: accessins
change_passwdrec: Error opening file '/flash/userlist.txt' to read.clear the Qig
Loading SCSI drivers [ OK ]
domounts: file /management/Userlist does not exist
Copying /management/Userlist.Def to /management/Userlist
domounts: file /management/shadow does not exist
Copying /management/shadow.Def to /management/shadow
Loading tg3 NIC driver gosNIC: found MAC 0xc0b622e409
gosNIC: found MAC 0xc0b622e408
gosNIC: Register 2 NIC devices sorted by MAC
tg3.c:v3.49 (Feb 2, 2006)
eth0: Tigon3 [partno(BCM95789) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Bas8
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
eth1: Tigon3 [partno(BCM95789) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Bas9
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ OK ]

.
.
.

Any suggestions as to other methods of resetting the password on this unit ?
dgungadoo is offline   Reply With Quote
Unread 12-03-2012, 07:17 PM   #2
dgungadoo
Cooling Neophyte
 
Join Date: Nov 2012
Location: London
Posts: 4
Default Re: Hardware Password Reset on SnapServer 410 - failure

P.S. The Diagnostic dump is as follows:


Diagnostics

This page shows some basic hardware information which may be useful in diagnosing problems with your Snap Server.
Boot Log

== QinfoDB indicates Maintenance Mode: no mount or pivot requested ==
Qinfo=QINFO_OK
final Qinfo=QINFO_OK
server_number=2286600
OEM=Snap
serial number=2286600
hostname=Snap2286600
Running DHCP client
eth0 using IP=192.168.0.51
Running on RAMDISK

Kernel Version

Init Version = 5.2.067
201006291150

cat: /mnt/pivot/version: No such file or directory

Linux Version = Linux version 2.6.16.21-gos-up (snap@BuildSys) (gcc version 4.1.0 (SUSE Linux)) #1 Tue Jun 29 11:52:42 PDT 2010

Attached Hard Disks

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00 Uid: 00
Vendor: ATA Model: ST31000528AS Rev: CC44
Type: Direct-Access ANSI SCSI revision: 05
Root Raid (Mirror) Info

/dev/md100root:
Version : 00.90.03
Creation Time : Mon Dec 3 22:54:00 2012
Raid Level : raid1
Array Size : 819200 (800.13 MiB 838.86 MB)
Device Size : 819200 (800.13 MiB 838.86 MB)
Raid Devices : 4
Total Devices : 1
Preferred Minor : 100
Persistence : Superblock is persistent

Update Time : Tue Jan 1 00:51:18 2002
State : clean, degraded
Active Devices : 1
Working Devices : 1
Failed Devices : 0
Spare Devices : 0

UUID : 09f32a67:1ea7f7dc:2089ba70:6db8e159
Events : 0.1867

Number Major Minor RaidDevice State
0 0 0 0 removed
1 8 2 1 active sync /dev/sda2
2 0 0 2 removed
3 0 0 3 removed
Disk Partitions

major minor #blocks name

8 0 976762584 sda
8 1 16041 sda1
8 2 819315 sda2
8 3 1 sda3
8 4 975653878 sda4
8 5 273104 sda5
9 100 819200 md100
9 101 273024 md101
240 0 150000 trd
Platform Bytes

07.07.00

Model Byte

06

Serial Number

2286600

Bios Stamp

WAV40602

Network devices

eth0 Link encap:Ethernet HWaddr 00:C0:B6:22:E4:08
inet addr:192.168.0.51 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:118 errors:0 dropped:0 overruns:0 frame:0
TX packets:41 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:12303 (12.0 Kb) TX bytes:20037 (19.5 Kb)
Interrupt:11

eth1 Link encap:Ethernet HWaddr 00:C0:B6:22:E4:09
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0

CPU Info

processor : 0
vendor_id : CentaurHauls
cpu family : 6
model : 13
model name : VIA C7 Processor 2000MHz
stepping : 0
cpu MHz : 1995.397
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge cmov pat clflush acpi mmx fxsr sse sse2 tm nx pni est tm2 xtpr rng rng_en ace ace_en
bogomips : 3997.05


Mem Info

MemTotal: 1033968 kB
MemFree: 855564 kB
Buffers: 14348 kB
Cached: 4564 kB
SwapCached: 0 kB
Active: 4272 kB
Inactive: 15628 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 1033968 kB
LowFree: 855564 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 24 kB
Writeback: 0 kB
Mapped: 1372 kB
Slab: 5400 kB
CommitLimit: 516984 kB
Committed_AS: 2616 kB
PageTables: 120 kB
VmallocTotal: 1163256 kB
VmallocUsed: 151480 kB
VmallocChunk: 1011496 kB

PCI Devices

00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0f.0 SATA controller: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller (rev 20)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 91)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 91)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge
05:0b.0 Mass storage controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
80:00.0 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
80:00.1 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
81:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express (rev 21)
82:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express (rev 21)

Kernel Boot Messages

****************************************** **********************
************************************************** **************
Load Guardian OS...
VERSION: 5.2.067
DATE: 201006291150
****************************************** **********************
************************************************** **************
Linux version 2.6.16.21-gos-up (snap@BuildSys) (gcc version 4.1.0 (SUSE Linux)) #1 Tue Jun 29 11:52:42 PDT 2010
****************************************** **********************
************************************************** **************
<6>BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data)
BIOS-e820: 000000003ffce000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
1023MB LOWMEM available.
On node 0 totalpages: 262080
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 257984 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI present.
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists
Kernel command line: root=/dev/ram ramdisk=16384 vmalloc=256M console=ttyS0,115200n8 rw NOPIVOT=true
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1995.397 MHz processor.
Using tsc for high-res timesource
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Memory: 1030204k/1048320k available (2649k kernel code, 17604k reserved, 956k data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3997.05 BogoMIPS (lpj=7994102)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: a7c9bbff 00100000 00000000 00000000 00004181 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
CPU: After all inits, caps: 27c9bbff 00100000 00000000 00000000 00004181 0000ffcc 00000000
CPU: Centaur VIA C7 Processor 2000MHz stepping 00
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 3490k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=130
PCI: Using configuration type 1
qscsi init: Initializing qscsi internal data structures.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:13.1
PCI: Discovered primary peer bus 83 [IRQ]
PCI: Using IRQ router default [1106/3287] at 0000:00:11.0
Setting up standard PCI resources
Qhwif: found wave 4disk
Qhwif: attached qvop to WaveQhwifOps for Wave1U
Qhwif: Found Platform WAVE_4D,(ID=4040101)
Qhwif_ACPI: ----- Completed ACPI Initialization -----
Qhwif: Qhwif proc entries installed OK
Qhwif: watchdog is disabled in BIOS
Qhwif: qinfo proc entries installed OK
EXP_UNIT: 0x04040101 does not support Remora ExpUnits
EXP_UNIT: ExpPorts 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15, available for attached unit
Qhwif: Qhwif driver successfully loaded as Wave1U driver
LEDdrv: LED driver successfully loaded for MantaType
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:80:00.0
IO window: disabled.
MEM window: fe900000-fe9fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:80:00.1
IO window: disabled.
MEM window: fea00000-feafffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: fe900000-feafffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
IO window: e000-efff
MEM window: feb00000-febfffff
PREFETCH window: 50000000-500fffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:80:00.0 to 64
PCI: Setting latency timer of device 0000:80:00.1 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
audit: initializing netlink socket (disabled)
audit(1009846326.964:1): initialized
Enabling auto tuning proc hooks
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
SGI XFS Data Management API subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
quirk_usb_early_handoff: skipping ehci early handler
PCI: Setting latency timer of device 0000:80:00.0 to 64
pcie_portdrv_probe->Dev[287c:1106] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:80:00.0cie00]
PCI: Setting latency timer of device 0000:80:00.1 to 64
pcie_portdrv_probe->Dev[287d:1106] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:80:00.1cie00]
xnvram: initializing platform Base=4040100
xnvram: xnvram installed OK
Real Time Clock Driver v1.12ac
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.3 $ 1 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d080
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.21-gos-up uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 5, io base 0x0000d000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.21-gos-up uhci_hcd
usb usb2: SerialNumber: 0000:00:10.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
snapfp: Snap Appliance Front Panel USB driver
usbcore: registered new driver snapfp
i2c /dev entries driver
SMBus Via Pro adapter at 0400<6>md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 4460.000 MB/sec
raid5: using function: pIII_sse (4460.000 MB/sec)
md: spare personality registered for level -5
md: md driver 0.91.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
Using IPI Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 156k freed
Qhwif: Detected Reset Button Event!
init_guardianflash_mtd: Starting...
platform = 4040101

init_guardianflash_mtd: Found Wave Platform

init_guardianflash_mtd: Starting the Snap map
start_scan_addr = b8880000
init_guardianflash_mtd: chip probing idx=0
CFI: Found no Guardian.0 device at location zero
Found: PMC Pm49FL004
Guardian.0: Found 1 x8 devices at 0x0 in 8-bit bank
number of JEDEC chips: 1
SST Probe init_guardianflash_mtd:bank1 name:Guardian.0 size:80000
init_guardianflash_mtd: registering 1 whole flash banks at once
quirk_usb_snap_late_ehci_handoff: calling ehci pci-quirk BIOS handoff
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:10.4: irq 5, io mem 0xfe8ff800
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.21-gos-up ehci_hcd
usb usb3: SerialNumber: 0000:00:10.4
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
libata version 1.20 loaded.
sata_sil 0000:05:0b.0: version 0.9
ata1: SATA max UDMA/100 cmd 0xB883AC80 ctl 0xB883AC8A bmdma 0xB883AC00 irq 3
ata2: SATA max UDMA/100 cmd 0xB883ACC0 ctl 0xB883ACCA bmdma 0xB883AC08 irq 3
ata3: SATA max UDMA/100 cmd 0xB883AE80 ctl 0xB883AE8A bmdma 0xB883AE00 irq 3
ata4: SATA max UDMA/100 cmd 0xB883AEC0 ctl 0xB883AECA bmdma 0xB883AE08 irq 3
ata1: SATA link up 1.5 Gbps (SStatus 113)
ata1: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7f61 84:4163 85:3469 86:be01 87:4163 88:407f 93:0000
ata1: dev 0 ATA-8, max UDMA/133, 1953525168 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: SATA link down (SStatus 0)
scsi1 : sata_sil
ata3: SATA link down (SStatus 0)
scsi2 : sata_sil
ata4: SATA link down (SStatus 0)
scsi3 : sata_sil
Vendor: ATA Model: ST31000528AS Rev: CC44
Type: Direct-Access ANSI SCSI revision: 05
S/N: 9VP6M4EY
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 < sda5 > sda4
sd 0:0:0:0: Attached scsi disk sda
Qhwmon: proc entries installed OK
drivers/misc/Qhwif/SnapExpUnit.c: 1285: Qhwmon ops initialized
expunit_process_initial_setup(): Pre-installed expansion Units!! Portmap: 0x00000000
Qhwmon: Hardware monitor driver successfully loaded as Wave1U driver
Qinfo: setup for WAVE
Qinfo: Reading from QinfoDB... CheckSum = 0000
Qinfo:0000: 00 c0 b6 22 e4 08 00 00 00 00 01 02 01 47 00 00 ...".........G..
Qinfo:0010: 07 07 00 06 01 40 ed fe 0d f0 02 00 00 00 00 00 .....@..........
Qinfo:0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Qinfo:0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Qinfo:0040: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 ................
Qinfo:0050: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
Qinfo:0060: 00 00 00 00 00 01 01 02 07 f8 00 00 00 00 00 00 ................
Qinfo:0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 11 4e ...............N
Qinfo: BIOS ByteString: START_ADDR=ffffffe0 LENGTH=32
Qinfo: BIOS ByteString: Raw="WAV40602.............03/13/09...", 32 chars (isBiosStrChr filter)
Qinfo: start at 0, find an ascii BIOS string: "WAV40602", 8 chars
Qinfo: Bios Version: :WAV40602:
md: md100 stopped.
md: bind
raid1: raid set md100 active with 1 out of 4 mirrors
md: md101 stopped.
md: bind
raid1: raid set md101 active with 1 out of 4 mirrors
Qinfo: Write QinfoDB to hardware
gosNIC: found MAC 0xc0b622e409
gosNIC: found MAC 0xc0b622e408
gosNIC: Register 2 NIC devices sorted by MAC
tg3.c:v3.49 (Feb 2, 2006)
PCI: Setting latency timer of device 0000:81:00.0 to 64
eth0: Tigon3 [partno(BCM95789) rev 4201 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:c0:b6:22:e4:08
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
PCI: Setting latency timer of device 0000:82:00.0 to 64
eth1: Tigon3 [partno(BCM95789) rev 4201 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:c0:b6:22:e4:09
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
Qinfo: Write QinfoDB to hardware
Qhwif: Detected transition to NORMAL, or RAMDISK. Enable watchdog management
trd: Ram disk of 150000k, as 300000 sectors of 512 bytes
dgungadoo is offline   Reply With Quote
Reply

Tags
410, password, reset


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:52 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...