Innovatek Konvekt-O-Matic MAXI

damado · 04-27-2004, 01:11 PM

Anyone know if the Innovatek Konvekt-O-Matic MAXI would be good enough to handle cooling a CPU, GPU, chipset, HD, and PSU?

No overclocking will be done. This is just to silence everything.

It will be used for cooling the new 939 athlons along with their pci-e vid card a raptor drive and a silentmaxx psu.

j3rkoff · 05-04-2004, 02:41 PM

Probably not. The pump in those things might not be enough to get water through 5 different blocks, and even if it was, that's a lot of heat to be dissipated by passive cooling. It might work if you have a 20" floor fan pointed at it, but other than that, I'm not sure it would be able to cool all that.

04-27-2004, 01:11 PM	#1
damado Cooling Neophyte Join Date: Jun 2001 Posts: 13	Innovatek Konvekt-O-Matic MAXI Anyone know if the Innovatek Konvekt-O-Matic MAXI would be good enough to handle cooling a CPU, GPU, chipset, HD, and PSU? No overclocking will be done. This is just to silence everything. It will be used for cooling the new 939 athlons along with their pci-e vid card a raptor drive and a silentmaxx psu.

05-04-2004, 02:41 PM	#2
j3rkoff Cooling Neophyte Join Date: Aug 2003 Location: AZ Posts: 50	Probably not. The pump in those things might not be enough to get water through 5 different blocks, and even if it was, that's a lot of heat to be dissipated by passive cooling. It might work if you have a 20" floor fan pointed at it, but other than that, I'm not sure it would be able to cool all that. __________________ Currently using one large rad, two gallons of coolant, and two 13.5 inch fans to cool my car's engine.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)