Go Back   Pro/Forums > ProCooling Technical Discussions > Snap Server / NAS / Storage Technical Goodies
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

Snap Server / NAS / Storage Technical Goodies The Home for Snap Server Hacking, Storage and NAS info. And NAS / Snap Classifides

Reply
Thread Tools
Unread 01-20-2011, 08:00 AM   #1
alty
Cooling Neophyte
 
Join Date: Jan 2011
Location: Ireland
Posts: 5
Default Snap Server 2200 keeps crashing (log included)

Hi folks,
I have a snap Server 2200 that keeps on crashing.

When I turn it on, it keeps going into 'Dick checking mode' and then crashes.
When I first turn it on, I can connect to it via Web utility, where I can check status/options, but can't gain access to the hard disk
Then the 'System' LED gives 2 flashes at a time
Then the 'System' LED flahes rapidly and the 'Link' LED stays on constant.

I know I have a serious issue here. The Snap Server is not important, I just want to get the information off the hard drive. The HDD's are mirrored at least.

My question is:
1) Can I recover teh Snap Server? (Log below)
2) Can I remove the hard drives and connect it to my Windows XP computer as a slave drive, to extract the data?


Thanks so much for any help you can provide.

Log below and have also attached a .doc as below is quite messy.

Severity legend: I=Information, W=Warning, E=Error, F=Fatal Error, S=Server Startup
Message Source Date Time
E File System : Mirror device 50000 operating in degraded mode Disk 50000
Mirror 1/21/2011 1:57:09 PM
W File System : Logical device 80050000: no spares found to perform hot replacement Disk 50000
Mirror 1/21/2011 1:57:09 PM
W File System : Disk I/O error on mirror device 50000 Disk 50000
Mirror 1/21/2011 1:57:09 PM
E File System : Unrecoverable error on logical device 50000. Member 10010 failing Disk 50000
Mirror 1/21/2011 1:57:09 PM
W File System Check : partition is NOT clean. Disk 50000
Mirror 1/21/2011 1:51:51 PM
S System Initialization : Server v4.0.860
Build Date: Mar 2 2005 17:50:55
Boot Count: 98 System 1/21/2011 1:51:46 PM
F Call Stack :
$0024B491
$002461C4
$00244990
$00244479
$00243FE6
$0023C69B
$00239A3F
$001041C3
================================ System 1/21/2011 1:34:36 PM
F PANIC : ASSERT(fcbp->fcb_magic == FCB_MAGIC) System 1/21/2011 1:34:36 PM
S System Initialization : Server v4.0.860
Build Date: Mar 2 2005 17:50:55
Boot Count: 93 System 1/21/2011 12:52:09 PM
F Call Stack :
$00105131
$002D1454
$002D8496
$002DF71A
$002B2187
$002B0957
$002BC3D6
$002BD7B6
$002B1EDF
$002B07E5
$002BC2B4
$002B0AAC
$0010413C
$001041F6
================================ System 1/20/2011 9:08:34 AM
F PANIC : Maximum yield time exceeded at $002BCE96 System 1/20/2011 9:08:34 AM
W File System Check : Clean flag not set in superblock (Fixed) Disk 50000
Mirror 1/19/2011 11:32:09 PM
W File System Check : Modified flag set in superblock (Fixed) Disk 50000
Mirror 1/19/2011 11:32:09 PM
W File System Check : partition is NOT clean. Disk 50000
Mirror 1/19/2011 11:07:30 PM
S System Initialization : Server v4.0.860
Build Date: Mar 2 2005 17:50:55
Boot Count: 92 System 1/19/2011 11:07:25 PM
F Call Stack :
$0024B491
$00246044
$00244116
$00243FE6
$0023C69B
$00239A3F
$001041C3
================================ System 1/9/2011 5:45:12 PM
F PANIC : ASSERT(fcbp->fcb_magic == FCB_MAGIC) System 1/9/2011 5:45:12 PM
S System Initialization : Server v4.0.860
Build Date: Mar 2 2005 17:50:55
Boot Count: 88 System 1/9/2011 4:37:07 PM
F Call Stack :
$00105131
$002D1454
$002D8496
$002DF71A
$002B2187
$002B0957
$002BC3D6
$002BD7B6
$002B1EDF
$002B07E5
$002BC2B4
$002B0AAC
$0010413C
$001041F6
================================ System 12/11/2010 3:07:19 PM
F PANIC : Maximum yield time exceeded at $002BCE96 System 12/11/2010 3:07:19 PM
Attached Files
File Type: doc Snap.doc (55.5 KB, 0 views)
alty is offline   Reply With Quote
Unread 01-20-2011, 09:21 AM   #2
blue68f100
Thermophile
 
blue68f100's Avatar
 
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
Default Re: Snap Server 2200 keeps crashing (log included)

It's reporting a failed HD 10010. Drop the power to that drive and see if it boots.

DO NOT PUT THEM IN YOUR XP MACHINE UNLESS YOU WANT TO DESTROY EVERYTHING ON THE HD'S. Snap uses a very special file system and can not be read except by another SnapOS system, or recovery service.

Read the FAQ's it will help you through your problem.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5,
1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5,
1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy

Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820
blue68f100 is offline   Reply With Quote
Unread 01-20-2011, 11:17 AM   #3
alty
Cooling Neophyte
 
Join Date: Jan 2011
Location: Ireland
Posts: 5
Default Re: Snap Server 2200 keeps crashing (log included)

Hi,
Thanks a lot for the quick reply.

I had read somewhere that you couldn't put the HD's in a Windows Machine, so I didn't do that obviously, however thought i'd ask incase there was a way around it.

You are right, there appears to be a failed drive. I removed the IDE cable from the top hard drive (as you look at the server from the front, on the left) and it's not crashing anymore.

Lookign at logs it must do 'repairs' to the current drive - I have no choice but to let it to this as the drive is current offline.

Fingers crossed there is no data loss here.

I will keep the thread updated in the hope it may be of use for future reference
alty is offline   Reply With Quote
Unread 01-20-2011, 12:26 PM   #4
alty
Cooling Neophyte
 
Join Date: Jan 2011
Location: Ireland
Posts: 5
Default Re: Snap Server 2200 keeps crashing (log included)

CRISIS AVERTED!

As advised above, I un-plugged the hard-drive, the system did its repair to the other drive and I am now pulling data off the good drive (to ensure no loss)

I don't trust this Snap Server 2200 for some reason!

It's quite old now (2005 I think) and I want to replace it.

Can anyone offer any decent alternative SAN with a similar set-up to the Snap Server 2200? i.e. 2 hard disks, RAID 1 which will mirror

OR, am I being silly and should I just replace the hard-disk in the Snap Server 2200 and continue as normal?

Thanks again for teh advise, great forum!
alty is offline   Reply With Quote
Unread 01-20-2011, 12:55 PM   #5
blue68f100
Thermophile
 
blue68f100's Avatar
 
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
Default Re: Snap Server 2200 keeps crashing (log included)

You can always install newer HD's and replace the fan every 3-5yrs like I do on mine. One thing that cause problems is power cycling the units all the time. These units are design to run 24/7, power cycling takes a hit on the power supply and system. But if you move to a newer OS (>XP) you may be forced to anyway. My 2200 has only been turned off once in 3 yrs. And that was due to an extended power outage, transformer blew up at the switch yard. My APC SmartUPS 1500va powered all my hardware down when the battery life was at 2 min left. Then powered most every thing backup when power was restored.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5,
1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5,
1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy

Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820
blue68f100 is offline   Reply With Quote
Unread 01-20-2011, 01:03 PM   #6
alty
Cooling Neophyte
 
Join Date: Jan 2011
Location: Ireland
Posts: 5
Default Re: Snap Server 2200 keeps crashing (log included)

Thanks for the advice. I will keep that in mind.

If I was to buy a direct replacment Mirror HD (I didn't even take the dud HD out of the case yet to check what it is), is it just a matter of popping the new one in? Or is there much config?
alty is offline   Reply With Quote
Unread 01-21-2011, 02:07 PM   #7
blue68f100
Thermophile
 
blue68f100's Avatar
 
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
Default Re: Snap Server 2200 keeps crashing (log included)

I try to match the current drive mfg & model if you can. If not a larger capacity HD will be cut down to match the Master position. So if you use a larger HD make sure it's in the slave position.

The FAQ's have the procedure, link in my sig.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5,
1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5,
1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy

Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820
blue68f100 is offline   Reply With Quote
Unread 01-24-2011, 04:46 PM   #8
alty
Cooling Neophyte
 
Join Date: Jan 2011
Location: Ireland
Posts: 5
Default Re: Snap Server 2200 keeps crashing (log included)

Hi folks,
My friend (who owns the server) reckons he wants a new system altogether... he just doesn't trust the current snap server (his own choice, i'm not gonna tell him otherwise)

I know i'm kinda going off topic on my own thread, but are there any other good, reliable back-up servers, with a similar set-up to the Snap 2200 (Raid 1, mirrored drive). Price isin't really an issue for a proper, reliable system.

Thanks
alty is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:24 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...