Squirrel By Balinju & Hara - Page 6

bigben2k · 03-06-2003, 03:14 PM

Thanks guys! I hope your block is ready for testing soon!

hara · 03-06-2003, 03:19 PM

Thanks, maybe next week it'll be ready. There's much more work to do.

jaydee · 03-06-2003, 03:37 PM

Quote:

Originally posted by Balinju
ok you told me

hara is a maltese word for shit, so the bullshit is not me but you

So he is calling himself shit? :shrug: If the shoe fits....

hara · 03-06-2003, 05:26 PM

That's the first thing that passed through my mind whilst registering (@ procooling)

hara · 03-07-2003, 10:45 AM

Here it is nearly completely milled. See Jaydee, you were the one who said that it couldn't be milled!

jaydee · 03-07-2003, 11:09 AM

Well I still stand by that, this is not the same block I said that about but a sever revesion of it. Hell I could mill this with my POS mill.

Looks good non the less! I don't see a cone in the middle though.:shrug: Is that C110 copper or some type of allow? Looks weird. May just be the camera flash....

hara · 03-07-2003, 12:01 PM

The only modification done was changing the channel width from 1.5mm to 2mm and reducing them from 12 to 10.

jaydee · 03-07-2003, 12:10 PM

Quote:

Originally posted by hara
The only modification done was changing the channel width from 1.5mm to 2mm and reducing them from 12 to 10.

Exactly, do you understand the difference between a 2mm and a 1.5mm end mill?. Not that this person couldn't do it as it apperas he has a very good mill though. I would snap a few 1.5mm endmills if I attempted the original design but I am shure I could do it if I spent a good 6hrs on it. I belive I could also do Bens block aswell given a alot of patients and time. Neither of which I have at the moment.

My impossible statment I will retract.

hara · 03-07-2003, 01:50 PM

Quote:

My impossible statment I will retract.

That's good.

Quote:

Is that C110 copper or some type of allow?

The flash may deceive you. The flash makes copper look redder. In this case, that is its natural colour. It looks the same as the maze 3.

We don't know if it's C110 or C101. Is there any way to know?

jaydee · 03-07-2003, 02:29 PM

Quote:

Originally posted by hara

We don't know if it's C110 or C101. Is there any way to know?

Not that I am aware of. I micron microscope maybe able to but you would have to know what your looking at.

Balinju · 03-07-2003, 02:31 PM

Quote:

Not that I am aware of. I micron microscope maybe able to but you would have to know what your looking at.

I think that that's too complicated

jaydee · 03-07-2003, 02:46 PM

Quote:

Originally posted by Balinju
I think that that's too complicated

Yes it is.

And you would have to have a actual sample of both materials to compare, and a lab guy that knows what he is doing. That university probably has such equipment, but then you have to come up with the materials. Bah!

Balinju · 03-12-2003, 03:26 AM

squirrel is ready from machining. Tomorrow we will post some pics. When sealed and ready, our results will be posted also

hope that it performs well

Bignuts · 03-12-2003, 08:17 AM

I'm sorry, but I could never use a waterblock that was patterned after the Divine Order, unless, of course, I was Captian of the most powerful force of destruction in the two know Universes...

bigben2k · 03-12-2003, 09:08 AM

Quote:

Originally posted by Balinju
squirrel is ready from machining. Tomorrow we will post some pics. When sealed and ready, our results will be posted also hope that it performs well

Looking forward to it!

Make sure you include the details of your inlet geometry! I want to see how it's going to perform, because it's the closest thing to my block that I've seen, but I'm not close to an actual build yet.

hara · 03-12-2003, 09:08 AM

Excuse me for my ignorance but...what do you mean Bignuts?

Balinju · 03-12-2003, 09:26 AM

Quote:

Originally posted by Bignuts
I'm sorry, but I could never use a waterblock that was patterned after the Divine Order, unless, of course, I was Captian of the most powerful force of destruction in the two know Universes...

did not understand a thing

What do you mean?? :shrug:

bigben2k · 03-12-2003, 09:52 AM

It's a reference to a tv show called "Lexx".

jaydee · 03-12-2003, 11:05 AM

Quote:

Originally posted by Balinju
squirrel is ready from machining. Tomorrow we will post some pics. When sealed and ready, our results will be posted also hope that it performs well

What the? What are the pictures above of then? I practice run?

hara · 03-12-2003, 11:46 AM

Those pictures are from when the milling wasn't complete. The rod is now a cone.

jaydee · 03-12-2003, 01:29 PM

Quote:

Originally posted by hara
Those pictures are from when the milling wasn't complete. The rod is now a cone.

Ahh, I thought you were machining a whole new block.

hara · 03-12-2003, 02:28 PM

The guy that did that for us is p1ssed because it took him a lot of time. He also lost 3 endmills. Don't think we'll get to have 2

bigben2k · 03-12-2003, 02:37 PM

You should offer to replace those endmills: it's the least you can do!

I'm certainly looking forward to purchasing a dozen 1.0 mm endmills

jaydee · 03-12-2003, 03:55 PM

Quote:

Originally posted by hara
The guy that did that for us is p1ssed because it took him a lot of time. He also lost 3 endmills. Don't think we'll get to have 2

No shit eh? That was the basis for my original "Imossible" statement and is also why the WW is so expensive. Copper milling is a expensive whore. I like cheap whores myself!!!

hara · 03-12-2003, 04:40 PM

He lost 3 high speed steel endmills and gave him 1 carbide endmill. They are so expensive

03-06-2003, 03:14 PM	#126
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Thanks guys! I hope your block is ready for testing soon! __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

03-06-2003, 03:19 PM	#127
hara Cooling Savant Join Date: Oct 2002 Location: Malta, Mediterranean Posts: 662	Thanks, maybe next week it'll be ready. There's much more work to do. __________________ - Every great HD crash day is the day before back-up day. - My Past System - "Better to reign in Hell than serve in Heaven." - Milton, Paradise Lost. - FMZ

03-06-2003, 05:26 PM	#129
hara Cooling Savant Join Date: Oct 2002 Location: Malta, Mediterranean Posts: 662	That's the first thing that passed through my mind whilst registering (@ procooling) __________________ - Every great HD crash day is the day before back-up day. - My Past System - "Better to reign in Hell than serve in Heaven." - Milton, Paradise Lost. - FMZ

03-07-2003, 12:01 PM	#132
hara Cooling Savant Join Date: Oct 2002 Location: Malta, Mediterranean Posts: 662	The only modification done was changing the channel width from 1.5mm to 2mm and reducing them from 12 to 10. __________________ - Every great HD crash day is the day before back-up day. - My Past System - "Better to reign in Hell than serve in Heaven." - Milton, Paradise Lost. - FMZ

03-12-2003, 08:17 AM	#139
Bignuts Cooling Savant Join Date: Mar 2001 Posts: 155	Personally I'm sorry, but I could never use a waterblock that was patterned after the Divine Order, unless, of course, I was Captian of the most powerful force of destruction in the two know Universes...

03-07-2003, 11:09 AM	#131
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Well I still stand by that, this is not the same block I said that about but a sever revesion of it. Hell I could mill this with my POS mill. Looks good non the less! I don't see a cone in the middle though.:shrug: Is that C110 copper or some type of allow? Looks weird. May just be the camera flash....

03-12-2003, 03:26 AM	#138
Balinju Cooling Savant Join Date: Dec 2002 Location: Malta Posts: 495	squirrel is ready from machining. Tomorrow we will post some pics. When sealed and ready, our results will be posted also hope that it performs well

03-12-2003, 09:08 AM	#141
hara Cooling Savant Join Date: Oct 2002 Location: Malta, Mediterranean Posts: 662	Excuse me for my ignorance but...what do you mean Bignuts? __________________ - Every great HD crash day is the day before back-up day. - My Past System - "Better to reign in Hell than serve in Heaven." - Milton, Paradise Lost. - FMZ

03-12-2003, 09:52 AM	#143
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	It's a reference to a tv show called "Lexx". __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

03-12-2003, 11:46 AM	#145
hara Cooling Savant Join Date: Oct 2002 Location: Malta, Mediterranean Posts: 662	Those pictures are from when the milling wasn't complete. The rod is now a cone. __________________ - Every great HD crash day is the day before back-up day. - My Past System - "Better to reign in Hell than serve in Heaven." - Milton, Paradise Lost. - FMZ

03-12-2003, 02:28 PM	#147
hara Cooling Savant Join Date: Oct 2002 Location: Malta, Mediterranean Posts: 662	The guy that did that for us is p1ssed because it took him a lot of time. He also lost 3 endmills. Don't think we'll get to have 2 __________________ - Every great HD crash day is the day before back-up day. - My Past System - "Better to reign in Hell than serve in Heaven." - Milton, Paradise Lost. - FMZ

03-12-2003, 02:37 PM	#148
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	You should offer to replace those endmills: it's the least you can do! I'm certainly looking forward to purchasing a dozen 1.0 mm endmills __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

03-12-2003, 04:40 PM	#150
hara Cooling Savant Join Date: Oct 2002 Location: Malta, Mediterranean Posts: 662	He lost 3 high speed steel endmills and gave him 1 carbide endmill. They are so expensive __________________ - Every great HD crash day is the day before back-up day. - My Past System - "Better to reign in Hell than serve in Heaven." - Milton, Paradise Lost. - FMZ

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)