Go Back   Pro/Forums > ProCooling Geek Bits > Mod / System Gallery
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

Mod / System Gallery You got your machine all Spiffy'd up? Got the Chrome and the Fuzzy Dice? Show em off! (Free Image Hosting)

Reply
Thread Tools
Unread 07-29-2003, 02:40 AM   #1
GenGoku
Cooling Savant
 
GenGoku's Avatar
 
Join Date: Apr 2002
Location: Southern California
Posts: 177
Default Post your watercooled pictures

After doing a little searching, i was surprised to see there wasn't a dedicated thread for showing our watercooled setup. Before starting the watercooling project, looking for other people's setups was a bit of a chore. Hopefully this can be a semi-centralized location where we can all share how we setup the innards of the case.

here's my rig


(2xUV Lights. one on the bottom of the case, another hiding along the top)

Case: Lian Li PC65
Rad: DTek Pro Core
Pump: Eheim 1250
Tubing: 1/2" ClearFlex60
CPU Block: WhiteWater
GPU Block: Maze 4
Additives: Water Wetter / DTek UV Visible Blue

Extra Info: Yes, I cut the 3.5" HD Cage to fit the pro core. it was cut just deep enough so that the lower 3.5" blanking plates would still fit. The T-line going behind the floppy drive is where the air trap is hiding. the water-flow doesn't seem to be as strong as i had hoped, so after finals, i'll re-do the tubing. Electrical tape was used to prevent any possible shortages and rubbing against the side-panel window as i'm using worm clamps.

If anyone needs webspace for their system pics, drop me a PM and i'll host it.

Folks new to watercooling can see my progression pictures (Warning: I uploaded these directly off the digicam)
__________________
Lian Li PC65 / Enermax Thermal Monitor + Rheobus
Fioneer 4x DVD-RW (Cendyne)
Eheim1250 -> DTek ProCore -> WhiteWater -> Maze4 GPU (in series)
AMD XP 1700b+ @ 2.3GHz (11.5x200@1.75v actual)
GeForce 4 Ti4200 128MB
512MB DDR PC3200 HyperX
512MB DDR PC3200 TwinX (2x256)
Abit NF7-S v2.0
Samsung SyncMaster 900NF

Powered by Water

Last edited by GenGoku; 09-22-2003 at 07:04 PM.
GenGoku is offline   Reply With Quote
Unread 07-29-2003, 04:14 AM   #2
msv
Cooling Savant
 
msv's Avatar
 
Join Date: Dec 2002
Location: Sweden
Posts: 336
Default

Sorry for wrecking Your whole thread idea, but is that possibly a Titan aluminium fan on that heater core?
If so, is it noisy? I´m just about to order a heater core and a good 120 mm fan, and the Titan is the one I´m thinking of.
regards
Mikael S.
__________________
The only constant factor in all Your failures is You.

Catapultam habeo. Nisi pecuniam omnen mihi habis, ad caput tuum saxum immane mittam.
msv is offline   Reply With Quote
Unread 07-29-2003, 04:35 AM   #3
GenGoku
Cooling Savant
 
GenGoku's Avatar
 
Join Date: Apr 2002
Location: Southern California
Posts: 177
Default

no worries.

short answer: yes

long answer: it's okay but i also have a rehostat so if i feel it's too loud, i lower it down
__________________
Lian Li PC65 / Enermax Thermal Monitor + Rheobus
Fioneer 4x DVD-RW (Cendyne)
Eheim1250 -> DTek ProCore -> WhiteWater -> Maze4 GPU (in series)
AMD XP 1700b+ @ 2.3GHz (11.5x200@1.75v actual)
GeForce 4 Ti4200 128MB
512MB DDR PC3200 HyperX
512MB DDR PC3200 TwinX (2x256)
Abit NF7-S v2.0
Samsung SyncMaster 900NF

Powered by Water

Last edited by GenGoku; 09-22-2003 at 07:07 PM.
GenGoku is offline   Reply With Quote
Unread 07-29-2003, 05:10 AM   #4
hara
Cooling Savant
 
hara's Avatar
 
Join Date: Oct 2002
Location: Malta, Mediterranean
Posts: 662
Default

This was done over a year ago. Doing another
Attached Images
File Type: jpg complete.jpg (48.1 KB, 1457 views)
__________________
- Every great HD crash day is the day before back-up day.
- My Past System
- "Better to reign in Hell than serve in Heaven." - Milton, Paradise Lost.
- FMZ

Last edited by hara; 07-29-2003 at 05:16 AM.
hara is offline   Reply With Quote
Unread 07-29-2003, 05:17 AM   #5
GenGoku
Cooling Savant
 
GenGoku's Avatar
 
Join Date: Apr 2002
Location: Southern California
Posts: 177
Default

nice looking case!

mind if we take a look under the hood
__________________
Lian Li PC65 / Enermax Thermal Monitor + Rheobus
Fioneer 4x DVD-RW (Cendyne)
Eheim1250 -> DTek ProCore -> WhiteWater -> Maze4 GPU (in series)
AMD XP 1700b+ @ 2.3GHz (11.5x200@1.75v actual)
GeForce 4 Ti4200 128MB
512MB DDR PC3200 HyperX
512MB DDR PC3200 TwinX (2x256)
Abit NF7-S v2.0
Samsung SyncMaster 900NF

Powered by Water
GenGoku is offline   Reply With Quote
Unread 07-29-2003, 05:18 AM   #6
hara
Cooling Savant
 
hara's Avatar
 
Join Date: Oct 2002
Location: Malta, Mediterranean
Posts: 662
Default

Thanks! Sure, internal view:
Attached Images
File Type: jpg fullsystem225.jpg (73.2 KB, 1717 views)
__________________
- Every great HD crash day is the day before back-up day.
- My Past System
- "Better to reign in Hell than serve in Heaven." - Milton, Paradise Lost.
- FMZ
hara is offline   Reply With Quote
Unread 07-29-2003, 09:23 AM   #7
bigben2k
Responsible for 2%
of all the posts here.
 
bigben2k's Avatar
 
Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
Default Re: Post your watercooled pictures

Quote:
Originally posted by GenGoku
After doing a little searching, i was surprised to see there wasn't a dedicated thread for showing our watercooled setup. Yes, there is a mod gallery, but this thread will be only for watercooled systems.
Here's the mod gallery Forum:
http://forums.procooling.com/vbb/for...?s=&forumid=26

We also have a Hardware & Case mods Forum:
http://forums.procooling.com/vbb/for...?s=&forumid=20
bigben2k is offline   Reply With Quote
Unread 07-29-2003, 02:11 PM   #8
GenGoku
Cooling Savant
 
GenGoku's Avatar
 
Join Date: Apr 2002
Location: Southern California
Posts: 177
Default Re: Post your watercooled pictures

Quote:
Originally posted by bigben2k
Here's the mod gallery Forum:
http://forums.procooling.com/vbb/for...?s=&forumid=26

We also have a Hardware & Case mods Forum:
http://forums.procooling.com/vbb/for...?s=&forumid=20
It seems like my point didn't get across. Let me try again. I already understand that a mod forum exists but that doesn't necessarily restrict images to watercooled-only. What i'm trying to do is get a thread started so if anyone asks about tubing placement, we can point them to this thread than telling them to search all around the forum/web.
__________________
Lian Li PC65 / Enermax Thermal Monitor + Rheobus
Fioneer 4x DVD-RW (Cendyne)
Eheim1250 -> DTek ProCore -> WhiteWater -> Maze4 GPU (in series)
AMD XP 1700b+ @ 2.3GHz (11.5x200@1.75v actual)
GeForce 4 Ti4200 128MB
512MB DDR PC3200 HyperX
512MB DDR PC3200 TwinX (2x256)
Abit NF7-S v2.0
Samsung SyncMaster 900NF

Powered by Water
GenGoku is offline   Reply With Quote
Unread 07-29-2003, 02:21 PM   #9
bigben2k
Responsible for 2%
of all the posts here.
 
bigben2k's Avatar
 
Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
Default

Gotcha...


I'm in favor of keeping the tubing as straight as possible, and "tug free", which can tilt a block off the core.

Here's pHaestus' article on the subject:
http://www.procooling.com/articles/h...s_with_h2o.php

In short, avoid mitre elbows, and if possible, go with two 45 deg copper sweeps. That's what I plan to use in my rig, for every significant turn of the tubing, with clamps, of course!
bigben2k is offline   Reply With Quote
Unread 07-29-2003, 02:28 PM   #10
GenGoku
Cooling Savant
 
GenGoku's Avatar
 
Join Date: Apr 2002
Location: Southern California
Posts: 177
Default

thanks for the link


stolen from pH's article
__________________
Lian Li PC65 / Enermax Thermal Monitor + Rheobus
Fioneer 4x DVD-RW (Cendyne)
Eheim1250 -> DTek ProCore -> WhiteWater -> Maze4 GPU (in series)
AMD XP 1700b+ @ 2.3GHz (11.5x200@1.75v actual)
GeForce 4 Ti4200 128MB
512MB DDR PC3200 HyperX
512MB DDR PC3200 TwinX (2x256)
Abit NF7-S v2.0
Samsung SyncMaster 900NF

Powered by Water
GenGoku is offline   Reply With Quote
Unread 07-29-2003, 03:42 PM   #11
Skeptic
Cooling Neophyte
 
Join Date: Jul 2003
Location: Washington
Posts: 48
Default

I will be posting my project pics as soon as I start it next week when I receive my new case. My current case is too small for some of the things I want to do with it.
Skeptic is offline   Reply With Quote
Unread 07-29-2003, 05:31 PM   #12
nikhsub1
c00ling p00n
 
nikhsub1's Avatar
 
Join Date: Jun 2002
Location: L.A.
Posts: 758
Default









__________________

*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*
E6700 @ 3.65Ghz / P5W DH Deluxe / 2GB 667 TeamGroup / 1900XTX
PC Power & Cooling Turbo 510 Deluxe
Mountain Mods U2-UFO Cube
Storm G5 --> MP-01 --> PA 120.3 --> 2x DDC Ultras in Series --> Custom Clear Res
"Artificial intelligence is no match for natural stupidity."
1,223,460+ Ghz Folding@Home
aNonForums
*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*
nikhsub1 is offline   Reply With Quote
Unread 07-29-2003, 06:59 PM   #13
Skeptic
Cooling Neophyte
 
Join Date: Jul 2003
Location: Washington
Posts: 48
Default

Nice Nik!

How do you like that cube?
Skeptic is offline   Reply With Quote
Unread 07-29-2003, 07:06 PM   #14
Blackeagle
Thermophile
 
Join Date: Oct 2002
Location: U.S.A = Michigan
Posts: 1,243
Default

Nikhsub1,

Wow! Most impressive indeed! Dual cores and your Iwaki MD15 quite a combo. How large of a temp drop did the duals give you?

What case is that?

Have you tried to increase your O/C with your increased cooling? Luck?
Blackeagle is offline   Reply With Quote
Unread 07-29-2003, 08:03 PM   #15
nikhsub1
c00ling p00n
 
nikhsub1's Avatar
 
Join Date: Jun 2002
Location: L.A.
Posts: 758
Default

Thanks guys, the case can be had at www.mountainmods.com tell ben Scott sent you My temps have dropped 5 - 6C with the new case/dual cores. Nothing else changed. My OC remains the same however, maybe a ram issue.
__________________

*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*
E6700 @ 3.65Ghz / P5W DH Deluxe / 2GB 667 TeamGroup / 1900XTX
PC Power & Cooling Turbo 510 Deluxe
Mountain Mods U2-UFO Cube
Storm G5 --> MP-01 --> PA 120.3 --> 2x DDC Ultras in Series --> Custom Clear Res
"Artificial intelligence is no match for natural stupidity."
1,223,460+ Ghz Folding@Home
aNonForums
*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*
nikhsub1 is offline   Reply With Quote
Unread 07-30-2003, 02:14 AM   #16
TheWiz
Cooling Neophyte
 
Join Date: Sep 2002
Location: Iowa
Posts: 7
Default RE

Here's mine





TheWiz is offline   Reply With Quote
Unread 07-30-2003, 02:33 PM   #17
Spike
Cooling Neophyte
 
Spike's Avatar
 
Join Date: May 2003
Location: Oxford/Colchester UK
Posts: 5
Default

Waterchill Pump and Zalman waterblock.
Waterchill Radiator but soon to be changed to a nextcool w-zero x1.

System is a Pentium 4 2.0A o/c to 2.5GHz in a CoolerMaster 201B BXT.





Might invest in a Maze4 watercooling kit later in the year.
Spike is offline   Reply With Quote
Unread 07-30-2003, 03:52 PM   #18
BladeRunner
Cooling Savant
 
BladeRunner's Avatar
 
Join Date: Jul 2001
Location: Chesterfield Uk
Posts: 459
Default





__________________
Zero Fan Zone

Last edited by BladeRunner; 05-06-2004 at 03:37 PM.
BladeRunner is offline   Reply With Quote
Unread 07-30-2003, 03:54 PM   #19
mfpmax
Cooling Savant
 
Join Date: Oct 2000
Location: Rockledge,FL,US
Posts: 731
Default

__________________
My old and retired watercooling setup.
Watercooled K6-2 450 at 600
Also Retired - Watercooling an XP1800@1782MHz
mfpmax is offline   Reply With Quote
Unread 07-30-2003, 07:21 PM   #20
yuanlong
Cooling Neophyte
 
Join Date: May 2003
Location: Malaysia, KL
Posts: 39
Default

Spike... how's the zalman wb performance??
yuanlong is offline   Reply With Quote
Unread 07-30-2003, 11:37 PM   #21
Spike
Cooling Neophyte
 
Spike's Avatar
 
Join Date: May 2003
Location: Oxford/Colchester UK
Posts: 5
Default

Better than the waterchill block
Spike is offline   Reply With Quote
Unread 07-31-2003, 12:46 AM   #22
Giblet Plus!
Cooling Neophyte
 
Giblet Plus!'s Avatar
 
Join Date: Dec 2002
Location: Victoria, MN
Posts: 23
Default







I like red.

White Water Rapids
Danner Mag 5 (I know the Mag 3 is a better choice, but I was a n00b)
1973 Chevy Caprice Core
Clearflex 60

Last edited by Giblet Plus!; 07-31-2003 at 08:31 AM.
Giblet Plus! is offline   Reply With Quote
Unread 07-31-2003, 04:53 AM   #23
yuanlong
Cooling Neophyte
 
Join Date: May 2003
Location: Malaysia, KL
Posts: 39
Default

Quote:
Originally posted by Spike
Better than the waterchill block
Any temp reading to share?? Best if got compare
yuanlong is offline   Reply With Quote
Unread 07-31-2003, 09:11 AM   #24
nicozeg
Cooling Savant
 
nicozeg's Avatar
 
Join Date: Sep 2002
Location: Santiago, Chile
Posts: 403
Default

This is mine, CPU & GPU water cooled with my own made blocks, the rest of the cooling system is outside of the box
Attached Images
File Type: jpg circuito.jpg (44.5 KB, 1225 views)
nicozeg is offline   Reply With Quote
Unread 07-31-2003, 09:25 AM   #25
xerka
Cooling Savant
 
xerka's Avatar
 
Join Date: Mar 2001
Location: Denver, CO
Posts: 107
Default

Here is my old setup, my new computer is just air cooled
__________________
Folders:
I've given up folding
xerka is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:50 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...