1600+ 2 gig finally made it

[toddalaska]

finally got the 1600+ over two gig.

a little work involved and a switch to a tc4 and all is good

heres the pic

its a green agoia y 0213



this is the whole reason i got water thanks to all

[Heavy_Equipment]

Great OC...614 MHz!!!

How stable is that??? Looks a bit warm for that kind of driving, but that's still a nice temp for those watts.

My AGOIA 1700+/ Iwill XP333/ chiller would post over 2GHz, but locked up soon after. I ended up running at 1914 to stay 110% stable.

You have my hopes up though...I just bought an AGOIA 1600+ to replace it, and I'm setting the Iwill and chiller back up today.

I got a 1600 because he had just gotten a new shipment in that morning...figured I'd gamble on a good batch with a recent build.

[toddalaska]

no thats stable, i have to turn my ram timings down cause its limits out at 188-190 on cas 2

my temps from 1910-2014 stay the same

for daily stuff i run at 1970 (188*10.50)

i ran it 3 days at over 2 gig but got tired of the slower ram timings

[Heavy_Equipment]

I hear you...I had my old 1600+ AGOGA and Samsung PC2100 running 201 FSB on the Iwill for awhile...although only around 1650 MHz.

It was great for bragging, but the memory was way over-volted, and running at the failsafe timing. I could mem bench higher at 166 FSB and aggressive timing.

[toddalaska]

yeah the slow timings were good to test the cpu i figured now that i know twhat that does ill invest in better ram to go with it.


I havent unlocked the chip or i could work it all out with the multiplier but these damm green ones are giving me trouble unlocking

[Heavy_Equipment]

I've managed to unlock one out of three green ones...and it was a crappy unlock too. Good to hear, I thought I was just losing my touch.

I won't touch it until next week, after the 7 day return is up at the retailer...in case it if it dies for whatever reason over the next few days. the last thing I need is scratches on it when I take it back... acetone takes off everything but scratches

[toddalaska]

yeha the green ones are a bugger.

so far i can run the chip up to 193 fsb without unlocking, so really im not gonna bother.

i jsut need to get a little better mem, some thatll go up to 200 i figure that will lt me max out the chip fully

i dont think itll go beyone 195*10.5

i thought i was just losing my unlocking touch too

[Heavy_Equipment]

uh-oh...does this mean AMD is inching closer to permanently locked?

[Heavy_Equipment]

Holy Crap!!!!!!!!!

I don't have my water loop back together yet, tomorrow, but this thread has me itching.

I fired it up with a stock hsf:

XP1600+ AGOIA
AMD Retail HSF
Samsung PC2700

Post greets me with 2200+

1789 MHz @46 C idle...too scared to load it...hit 50C in 2 seconds, so I stopped.

10.5 x 171 (170.38 )

This little chip is gonna love the chiller.

[toddalaska]

Yeah theres no real need to unlock they seem to let the fsb go as high as you want iff you got the cooling.

agoia y 0213


are the hottest ones out
i also had an agoia 4 that was pretty good