ACPI AND WIN2k?

H2o · 01-13-2002, 08:07 PM

not a mod, i need help, ok im tryin to install 2k on my new rig (Abit KG7, XP 1600, corsair 2100ddr, and i get somthin called an ACPI error, that my mobo bios isnt ACPI compliant.... i know that i can disable ACPI by just hitting F7 right be4 i start the install, but dont i want ACPI?? im not sure what to do. Any suggestions i will take, ohh ya i also contacted abit, but sigh.. no responce

01-14-2002, 11:02 AM

acpi has its ups and downs. If you turn off acpi you will in many cases get slightly better performance, also you will be able to set devices IRQs so they wont all pile on one leaving others empty. However you may lose features like hibernation and standby, not sure if these are of use to you.

Good luck with abit, you'll need it

H2o · 01-14-2002, 02:46 PM

humm.. thanks for the info, i dont really do standby or hibernation, do you know any links or any other posts in other forums of pple having the same problems as me?

Brad · 01-14-2002, 06:40 PM

also, with acpi off, win2k will not like shutting down itself. lastly, acpi off means your cpu runs at 60% power usage even when it is idle. so your temps are higher, but they don't fluctuate very much

H2o · 01-14-2002, 06:56 PM

ur just full of great info man! thnx for the input... but now that i know alot about ACPI... how do i get a ****ing ACPI compliant bios from abit?? i thought like this was a standard that all companys did... i have other abit boards taht i have no problems with.

AL666 · 01-31-2002, 03:22 PM

I have a KG7-R and never got any ACPI error messages...
first of KG7 is fully ACPI compatible mobo, so I don't know why you're getting an error message... if I were you I would contact ABIT rigth away...

In Win2K disabling ACPI is the easiest thing, but remember there's no turning back... If you want ACPI back, then you need to make a fresh install... Go to your "Device Manager" and under "Computer" change "Advanced Configuration and Power Interface (ACPI) PC" to "Standart PC", just like u normally update a driver... Don't forget to choose "Display a list of known drivers..." though ;0)

For more info visit the Paul's Unofficial KG7/KR7A FAQ...

http://www.viahardware.com/faq/kg7kr7/kg7kr7faq.htm

Good luck

Bollocks · 01-31-2002, 07:29 PM

some bios's have the option to turn on and off acpi, and if you have it turned off in the bios then win2k shits itself and wont install properly unless u do the f7 bodge at the beginning of the install.

Make sure that in the bios you dont have the acpi turned off, that could be the one problem.

01-13-2002, 08:07 PM	#1
H2o Cooling Neophyte Join Date: Jan 2002 Posts: 7	ACPI AND WIN2k? not a mod, i need help, ok im tryin to install 2k on my new rig (Abit KG7, XP 1600, corsair 2100ddr, and i get somthin called an ACPI error, that my mobo bios isnt ACPI compliant.... i know that i can disable ACPI by just hitting F7 right be4 i start the install, but dont i want ACPI?? im not sure what to do. Any suggestions i will take, ohh ya i also contacted abit, but sigh.. no responce

01-31-2002, 03:22 PM	#6
AL666 Cooling Savant Join Date: Dec 2001 Location: The City Posts: 104	Which BIOS are you using? I have a KG7-R and never got any ACPI error messages... first of KG7 is fully ACPI compatible mobo, so I don't know why you're getting an error message... if I were you I would contact ABIT rigth away... In Win2K disabling ACPI is the easiest thing, but remember there's no turning back... If you want ACPI back, then you need to make a fresh install... Go to your "Device Manager" and under "Computer" change "Advanced Configuration and Power Interface (ACPI) PC" to "Standart PC", just like u normally update a driver... Don't forget to choose "Display a list of known drivers..." though ;0) For more info visit the Paul's Unofficial KG7/KR7A FAQ... http://www.viahardware.com/faq/kg7kr7/kg7kr7faq.htm Good luck

01-31-2002, 07:29 PM	#7
Bollocks Cooling Neophyte Join Date: Sep 2001 Location: Australia Posts: 54	some bios's have the option to turn on and off acpi, and if you have it turned off in the bios then win2k shits itself and wont install properly unless u do the f7 bodge at the beginning of the install. Make sure that in the bios you dont have the acpi turned off, that could be the one problem. __________________ Bollocks -------------- Celeron 466@525 stable Plans for H20 setup in HX08

01-14-2002, 11:02 AM	#2
IronHelix Guest Posts: n/a	acpi has its ups and downs. If you turn off acpi you will in many cases get slightly better performance, also you will be able to set devices IRQs so they wont all pile on one leaving others empty. However you may lose features like hibernation and standby, not sure if these are of use to you. Good luck with abit, you'll need it

01-14-2002, 02:46 PM	#3
H2o Cooling Neophyte Join Date: Jan 2002 Posts: 7	humm.. thanks for the info, i dont really do standby or hibernation, do you know any links or any other posts in other forums of pple having the same problems as me?

01-14-2002, 06:40 PM	#4
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	also, with acpi off, win2k will not like shutting down itself. lastly, acpi off means your cpu runs at 60% power usage even when it is idle. so your temps are higher, but they don't fluctuate very much

01-14-2002, 06:56 PM	#5
H2o Cooling Neophyte Join Date: Jan 2002 Posts: 7	ur just full of great info man! thnx for the input... but now that i know alot about ACPI... how do i get a ****ing ACPI compliant bios from abit?? i thought like this was a standard that all companys did... i have other abit boards taht i have no problems with.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)